Service of the wiper motor begins with protective cover removal from the windshield wiper motor. In case the wiper motor does not function users should manually move the wiper motor linkage to reach the highest position on the windshield. Start by taking away the wiper mounting arm combined with the pivot shaft assembly. Thoroughly removing the wiper motor assembly's arm may result in incorrect
Wiper Arm parking positions. Therefore, this arm should remain attached to the assembly. A suitable tool applied at the designated location should be used to pull apart the wiper motor linkage arm from the wiper mounting arm and pivot shaft assembly. You should remove the windshield wiper motor by taking out its three securing bolts. Follow the installation process by tightening bolts to 13 Nm (115 lb-in) then perform the opposite steps of removal.