How to Service the Camshaft Position Sensor on 2009 Mercury Mariner?

Service of the Camshaft Position (CMP) Sensor begins with disconnecting its electrical connector. Start by disconnecting the electrical connector before you remove the bolt that secures the CMP sensor. After that pull out the sensor from its location. The installation procedure requires the CMP sensor bolt to reach a torque of 7 Nm (62 lb-in). You must check the O-ring seal condition and put in a new one if needed. After that apply clean engine oil to the new O-ring seal before install. Finish the installation by performing the removal procedure in reverse order.

OEM 2009 Mercury Mariner Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2009 Mercury Mariner Camshaft Position Sensor
Part Number: 9L8Z-6B288-B
$56.58 MSRP: $93.09
You Save: $36.51 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft Position; Engine Camshaft Position Sensor; Camshaft Sensor; Camshaft Position Sen
- Manufacturer Note: Intake
- Replaces: 9L8Z-6B288-A
- Base No.: 6B288
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-6B288-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Mariner Submodels:
- Base, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Mercury Mariner Camshaft Position Sensor
Part Number: 6M8Z-6B288-D
$65.17 MSRP: $109.42
You Save: $44.25 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft Position; Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 6M8Z-6B288-B, 6M8Z-12K073-AA, 6M8Z-6B288-C, DU-96, DU-98, DU-85
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.6 x 3.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6M8Z-6B288-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Mariner Submodels:
- Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS

2009 Mercury Mariner Camshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Mariner Camshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Mariner Camshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Mercury Mariner Camshaft Position Sensor Parts Questions & Experts Answers

Q: How to Service the Camshaft Position Sensor on 2009 Mercury Mariner?
A: Service of the Camshaft Position (CMP) Sensor begins with disconnecting its electrical connector. Start by disconnecting the electrical connector before you remove the bolt that secures the CMP sensor. After that pull out the sensor from its location. The installation procedure requires the CMP sensor bolt to reach a torque of 7 Nm (62 lb-in). You must check the O-ring seal condition and put in a new one if needed. After that apply clean engine oil to the new O-ring seal before install. Finish the installation by performing the removal procedure in reverse order.