How to Service the Camshaft Position Sensor on Mercury Mariner?

The first step for servicing the camshaft position (CMP) sensor requires disconnecting its electrical connector. Before removal you must remove the bolt retaining the CMP sensor followed by sensor removal. The new sensor should be installed by tightening it to 7 Nm (62 lb-in) torque specification and checking the O-ring seal for replacement if needed. Clean engine oil must be used to lubricate the O-ring seal before putting it into place on the sensor. You should perform the reverse steps of removal to finish the installation process.

OEM Mercury Mariner Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Camshaft Position Sensors found

View related parts
Mercury Mariner Camshaft Position Sensor Part Number: 9L8Z-6B288-B
$57.46 MSRP: $94.55
You Save: $37.09 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft Position; Engine Camshaft Position Sensor; Camshaft Sensor; Camshaft Position Sen
- Manufacturer Note: Intake
- Replaces: 9L8Z-6B288-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Base, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Camshaft Position Sensor Part Number: 1S7Z-6B288-AA
$22.10 MSRP: $35.09
You Save: $12.99 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft Position; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS
View related parts
Mercury Mariner Camshaft Position Sensor Part Number: 1F1Z-6B288-AB
$24.27 MSRP: $38.55
You Save: $14.28 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 1F1Z-6B288-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Mercury Mariner | Base, Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Camshaft Position Sensor Part Number: 6M8Z-6B288-D
$65.04 MSRP: $103.27
You Save: $38.23 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft Position; Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 6M8Z-6B288-B, 6M8Z-12K073-AA, 6M8Z-6B288-C, DU-96, DU-98, DU-85
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS

Mercury Mariner Camshaft Position Sensor

OEM Camshaft Position Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Camshaft Position Sensor with long life and a perfect fit. Come to our website and find genuine Mercury Mariner parts. We keep a wide inventory of OEM Mariner parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Mariner Camshaft Position Sensor Parts and Q&A

Camshaft Position Sensor
1S7Z-6B288-AA
Q: How to Service the Camshaft Position Sensor on Mercury Mariner?
A:
The first step for servicing the camshaft position (CMP) sensor requires disconnecting its electrical connector. Before removal you must remove the bolt retaining the CMP sensor followed by sensor removal. The new sensor should be installed by tightening it to 7 Nm (62 lb-in) torque specification and checking the O-ring seal for replacement if needed. Clean engine oil must be used to lubricate the O-ring seal before putting it into place on the sensor. You should perform the reverse steps of removal to finish the installation process.