FordParts
My Garage
My Account
Cart
OEM 2009 Mercury Milan Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2009 Mercury Milan Stabilizer Link, Front Driver Side Part Number: 3M8Z-5K483-L
$38.24 MSRP: $60.73You Save: $22.49 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit
- Position: Front Driver Side
- Base No.: 5K483
- Item Weight: 0.80 Pounds
- Item Dimensions: 20.1 x 6.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-5K483-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Milan Stabilizer Link, Front Passenger Side Part Number: 3M8Z-5K483-R
$32.63 MSRP: $51.82You Save: $19.19 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front Passenger Side
- Base No.: 5K483
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.4 x 6.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-5K483-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Milan Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Milan Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Milan Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Mercury Milan Sway Bar Link Parts Q&A
- Q: How to service and repair the front suspension Sway Bar Link on 2009 Mercury Milan?A: Service and repair of the sway bar link in front suspension requires the initial step to be removal of wheel and tire. The hex-holding feature must be used during both sway bar link nut removal and installation because it stops the ball stud from rotating. Install a new upper nut after removal of the old one by tightening it to 42 Nm (31 lb-ft). Use the hex-holding feature once more to stop the ball stud rotation when removing the lower sway bar link attachment. After nut removal discard it and take out the link. When installing the new lower nut follow a torque specification of 42 Nm (31 lb-ft). You need to perform the opposite steps to finalize the sway bar link installment. New parts need to be installed with original part numbers and equivalent parts because inferior components can create performance problems together with substantial service expenses. The correct torque numbers need to be maintained during the reassembly procedure to guarantee secure attachment of essential components.