How to service the Front Cross-Member on 2011 Ford Mustang?

The service process for the front crossmember begins by hoisting the vehicle in NEUTRAL position. Remove any crossmember brace that exists as part of the equipment. The front crossmember brake line can be disconnected by removing its two clips and performing a 7 Nm (62 lb-in) nut torque on the A/C line bracket before reinstalling them. Before moving on from the process, free up the power steering line locator from its position on the crossmember. The radiator should receive adequate support using a proper tool. The front stabilizer bar bracket nuts need to be untightened while installation but should be reinstalled at 70 Nm (52 lb-ft). Two technicians are required for moving forward with this step by loosening the four front crossmember nuts that need a torque of 115 Nm (85 lb-ft) when reinstalling. To finish the installation reverse the procedures that were used for removal.

OEM 2011 Ford Mustang Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Front Cross-Members found

View related parts
2011 Ford Mustang Lower Crossmember, Front
Part Number: BR3Z-5019-B
$261.08 MSRP: $383.38
You Save: $122.30 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Front; Crossmember
- Position: Front
- Replaces: BR3Z-5019-A
- Base No.: 5019
- Item Weight: 17.80 Pounds
- Item Dimensions: 9.3 x 8.2 x 36.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BR3Z-5019-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2011 Ford Mustang Submodels:
- Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2011 Ford Mustang Lower Brace
Part Number: BR3Z-5025-A
$37.77 MSRP: $54.03
You Save: $16.26 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Engine Cradle Brace
- Base No.: 5025
- Item Weight: 1.70 Pounds
- Item Dimensions: 26.3 x 1.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BR3Z-5025-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2011 Ford Mustang Submodels:
- Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2011 Ford Mustang Engine Cradle, Front
Part Number: BR3Z-5C145-A
$341.18 MSRP: $501.00
You Save: $159.82 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Engine Cradle, Front; Suspension Crossmember
- Position: Front
- Base No.: 5C145
- Item Weight: 30.90 Pounds
- Item Dimensions: 48.5 x 30.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BR3Z-5C145-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2011 Ford Mustang Submodels:
- Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

2011 Ford Mustang Front Cross-Member

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2011 Ford Mustang Front Cross-Member available at FordPartsDeal.com. You can confidently purchase our OEM 2011 Ford Mustang Front Cross-Member as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2011 Ford Mustang Front Cross-Member Parts Questions & Experts Answers

Q: How to service the Front Cross-Member on 2011 Ford Mustang?
A: The service process for the front crossmember begins by hoisting the vehicle in NEUTRAL position. Remove any crossmember brace that exists as part of the equipment. The front crossmember brake line can be disconnected by removing its two clips and performing a 7 Nm (62 lb-in) nut torque on the A/C line bracket before reinstalling them. Before moving on from the process, free up the power steering line locator from its position on the crossmember. The radiator should receive adequate support using a proper tool. The front stabilizer bar bracket nuts need to be untightened while installation but should be reinstalled at 70 Nm (52 lb-ft). Two technicians are required for moving forward with this step by loosening the four front crossmember nuts that need a torque of 115 Nm (85 lb-ft) when reinstalling. To finish the installation reverse the procedures that were used for removal.