Other Name: Bracket; Disc Brake Caliper Bracket, Rear Left
Position: Rear Driver Side
Fits the following Ford Models:
Expedition | 2022-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
Other Name: Bracket; Disc Brake Caliper Bracket, Front; Caliper Support
Position: Front
Fits the following Ford Models:
Bronco Sport | 2021-2023 | Badlands, Base, Big Bend, First Edition, Heritage Edition, Heritage Limited Edition, Outer Banks | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
Escape | 2020-2023 | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to Remove and Replace the Brake Caliper Bracket on F-250/350 and F-450/550 on Ford F-250 Super Duty?
A: To install a new brake caliper support bracket on F-250/350 and F-450/550, you must take out the parking brake shoes and cable first. Unattach the cable to the lever and then unscrew the bracket nuts, which have to be tightened to 137 Nm (101 lb-ft) when installed. Installation is done by reversing the process.