What Precautions Should Be Taken Before Servicing a Front Dipstick and Dipstick Tube Equipped with a Fire Suppression System on Ford Crown Victoria?

Disarm the vehicle before it is serviced to avoid getting injured. Take off the LH exhaust manifold and oil level gauge. Install the new tube with tightening up to 10 Nm and lubricate the O-ring seal. Installation of fire suppression system requires powering after being installed, with safety measures.

How to service and repair the engine oil dipstick and dipstick tube on Ford Crown Victoria?

In order to service and repair the engine oil dipstick and tube, remove the exhaust manifold first. Then, take out the level indicator tube of oil by removing the bolt and the tube. Examine O-ring seal. In order to replace the components, one only needs to reverse the steps that were used to remove them.

OEM Ford Crown Victoria Dipstick

Engine Oil Dipstick

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Dipsticks found

View related parts
Ford Crown Victoria Dipstick Part Number: 3W7Z-6750-EA
$15.90 MSRP: $22.55
You Save: $6.65 (30%)
ADD TO CART
Product Specifications
- Other Name: Indicator Assembly - Oil Level; Engine Oil Dipstick; Oil Level Indicator; Oil Dipstick
- Manufacturer Note: FROM 5/15/02
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Dipstick Part Number: YW7Z-6750-AA
Product Specifications
- Other Name: Indicator Assembly - Oil Level; Oil Dipstick
- Replaces: F8AZ-6750-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Dipstick Part Number: F5AZ-6750-BA
Product Specifications
- Other Name: Indicator Assembly - Oil; Oil Dipstick; Indicator Assembly - Oil Level
- Manufacturer Note: #F5AE,BA,Approx 561mm tip to handle stop,Use only with F5AZ,6754,A , BEFORE 5/13/97
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Dipstick Part Number: 1W7Z-6750-AA
Product Specifications
- Other Name: Indicator Assembly - Oil Level; Oil Dipstick
- Manufacturer Note: Loop type handle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria Dipstick

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Dipstick. We offer an extensive inventory of OEM Ford Crown Victoria Dipstick at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Dipstick Parts and Q&A

Dipstick
3W7Z-6750-EA
Q: What Precautions Should Be Taken Before Servicing a Front Dipstick and Dipstick Tube Equipped with a Fire Suppression System on Ford Crown Victoria?
A: Disarm the vehicle before it is serviced to avoid getting injured. Take off the LH Exhaust Manifold and oil level gauge. Install the new tube with tightening up to 10 Nm and lubricate the O-ring seal. Installation of fire suppression system requires powering after being installed, with safety measures.
Dipstick
1W7Z-6750-AA
Q: How to service and repair the engine oil dipstick and dipstick tube on Ford Crown Victoria?
A: In order to service and repair the engine oil dipstick and tube, remove the Exhaust Manifold first. Then, take out the level indicator tube of oil by removing the bolt and the tube. Examine O-ring seal. In order to replace the components, one only needs to reverse the steps that were used to remove them.