How to service the Fuel Pump Driver Module (FPDM) on Ford Crown Victoria?

Service of the Fuel Pump Driver Module (FPDM) requires starting by removing the three pin-type retainers along with the luggage compartment parcel shelf trim panel. The service of the Fuel Pump Driver Module (FPDM) begins with disconnecting its electrical connector followed by removal of the two bolts attaching the module. The installation process for the new FPDM requires bolt tightening to 4 Nm (35 lb-in) before following the reverse order of removal to finish the installation.

OEM Ford Crown Victoria Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Driver Module found

View related parts
Ford Crown Victoria Fuel Pump Controller
Part Number: 6W7Z-9D372-CA
$167.51 MSRP: $243.83
You Save: $76.32 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Fuel; Fuel Pump Driver Module; Module
- Manufacturer Note: FROM 12-05-05
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

Ford Crown Victoria Fuel Pump Driver Module

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Fuel Pump Driver Module. We offer an extensive inventory of OEM Ford Crown Victoria Fuel Pump Driver Module at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Fuel Pump Driver Module Parts Questions & Experts Answers

Fuel Pump Controller
6W7Z-9D372-CA
Q: How to service the Fuel Pump Driver Module (FPDM) on Ford Crown Victoria?
A: Service of the Fuel Pump Driver Module (FPDM) requires starting by removing the three pin-type retainers along with the luggage compartment parcel shelf trim panel. The service of the Fuel Pump Driver Module (FPDM) begins with disconnecting its electrical connector followed by removal of the two bolts attaching the module. The installation process for the new FPDM requires bolt tightening to 4 Nm (35 lb-in) before following the reverse order of removal to finish the installation.