Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM Ford Crown Victoria Fuel Filler Hose

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Filler Hoses found

  • Ford Crown Victoria Fuel Filler Hose - XW7Z-9C047-AB
    Ford Crown Victoria Fuel Filler Hose Diagram - XW7Z-9C047-AB
    View related parts

    Ford Crown Victoria Tube Assembly
    Part Number: XW7Z-9C047-AB

    Product Specifications
    • Other Name: Tube - Fuel Feed
    • Manufacturer Note: The 9B190 is not included in the assy part. It is serviced separately under service basic 9G332, FROM 5/27/99
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2000-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
  • Ford Crown Victoria Fuel Filler Hose - F8AZ-9C047-BD
    Ford Crown Victoria Fuel Filler Hose Diagram - F8AZ-9C047-BD
    View related parts

    Ford Crown Victoria Tube Assembly
    Part Number: F8AZ-9C047-BD

    Product Specifications
    • Other Name: Tube - Fuel Feed
    • Manufacturer Note: The 9B190 is not included in the assy part. It is serviced separately under service basic 9G332, BEFORE 5/27/99
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1998-1999 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
  • Ford Crown Victoria Fuel Filler Hose - F5AZ-9034-D
    Ford Crown Victoria Fuel Filler Hose Diagram - F5AZ-9034-D
    View related parts

    Ford Crown Victoria Filler Neck
    Part Number: F5AZ-9034-D

    Product Specifications
    • Other Name: Pipe - Fuel Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1995 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L GAS

Ford Crown Victoria Fuel Filler Hose

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Fuel Filler Hose. We offer an extensive inventory of OEM Ford Crown Victoria Fuel Filler Hose at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Fuel Filler Hose Parts Questions & Experts Answers

  • Ford Crown Victoria Fuel Filler Hose - XW7Z-9C047-AB Tube Assembly Tube Assembly
    XW7Z-9C047-AB
    Q: How to service and repair the fuel filler hose on Ford Crown Victoria?
    A: The procedure for repairing and servicing fuel filler hose starts by disconnecting the battery ground cable. Begin by emptying the Fuel Tank before removing screws because any damage to the retainer ring could make the cap unable to get a secure seal. Raise the vehicle before you take off the LH rear wheel combined with the tire assembly. The fuel filler hose servicing requires disconnecting the vapor recirculation tube using a screw and dogpoint screw with its blunt end for optimal performance. Obtain clearance in the fuel tank by sliding the fuel tank filler pipe into position before rotating it counterclockwise by 1/2 turn to detach it while protecting both the grommet and check valve at the pipe end. To achieve removal clearance you should loosen the tank straps. The fuel tank filler pipe installation requires petroleum with Ford specifications ESW-M1C115-A and ESB-M1C99-A for end lubrication before reinserting into the fuel tank. First install the dogpoint screw then the screws while securing the strap which should attach at the 4:00 o'clock position. Attach the hose for vapor recirculation at the end.

Related Ford Crown Victoria Parts

Browse Ford Crown Victoria Fuel Filler Hose by Years

+
2002 2001 2000 1999 1998 1995