How to service and repair the front axle beam on Ford E-150?

Service and repair of the front axle beam should start by removing both the wheel spindle and radius arm. The right-hand front axle requires lifting the left-hand side of the vehicle to decrease suspension weight so the pivot nut and bolt can be removed before taking out the axle. Proceed with the axle installation steps but delay tightening the nut until you position the components then apply a new pivot bolting and nutting. The wheel spindle together with the radius arm must be put back in place. Apply 175Nm torque to the axle pivot nut after the weight is on the wheels then check the front end alignment and make required adjustments. Installation of all new suspension fasteners should utilize components with the same part number to preserve performance quality and avoid significant maintenance costs. Proper retention requires that you follow specified torque values during reassembly steps.

OEM Ford E-150 Axle Beam

Rigid Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Axle Beams found

View related parts
Ford E-150 Frame Assembly
Part Number: 8C2Z-5005-CBZ
Product Specifications
- Other Name: Frame Rail
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Frame Assembly
Part Number: CC2Z-5005-C
Product Specifications
- Other Name: Frame Rail
- Replaces: BC2Z-5005-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford E-150 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Frame Assembly
Part Number: CC2Z-5005-A
Product Specifications
- Other Name: Frame Rail
- Replaces: BC2Z-5005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Frame Assembly
Part Number: 9C2Z-5005-CBB
Product Specifications
- Other Name: Frame Rail
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Frame Assembly
Part Number: 6C2Z-5005-A
Product Specifications
- Other Name: Frame Rail
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

Ford E-150 Axle Beam

Welcome to our website where you can discover high-quality, genuine Ford E-150 Axle Beam. We offer an extensive inventory of OEM Ford E-150 Axle Beam at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-150 Axle Beam Parts Questions & Experts Answers

Frame Assembly
6C2Z-5005-A
Q: How to service and repair the front axle beam on Ford E-150?
A: Service and repair of the front axle beam should start by removing both the wheel Spindle and Radius Arm. The right-hand front axle requires lifting the left-hand side of the vehicle to decrease suspension weight so the pivot nut and bolt can be removed before taking out the axle. Proceed with the axle installation steps but delay tightening the nut until you position the components then apply a new pivot bolting and nutting. The wheel spindle together with the radius arm must be put back in place. Apply 175Nm torque to the axle pivot nut after the weight is on the wheels then check the front end alignment and make required adjustments. Installation of all new suspension fasteners should utilize components with the same part number to preserve performance quality and avoid significant maintenance costs. Proper retention requires that you follow specified torque values during reassembly steps.