How to service and repair the battery cables mounted on the frame on Ford E-250?

The process of servicing battery cables attached to the frame starts with disconnecting the battery followed by battery removal from the car. The next step requires removal of the upper right battery tray bolt followed by loosening the remaining three bolts until torque reaches 40 Nm (30 lb-ft). Reinstall these bolts with this specified torque value. The battery tray can be unplugged from its bolts when you move it upwards while shifting it toward the right. It will then settle on the safety straps. When reinstalling the battery tray cover you should secure the two bolts at 7 Nm (62 lb-in). The battery terminal nuts can be stretched until the cables disconnect before re-tightening them to 15 Nm (11 lb-ft). Apply a torque of 14 Nm (10 lb-ft) when putting back the bolt which connects the frame-mounted battery harness to frame retainer. Dismantle the eight harness locators from the frame rail followed by the starter solenoid terminal cover then the starting solenoid positive cable nut before reinstallation that requires 12 Nm (9 lb-ft) torque setting. When reinstalling the starter solenoid wire terminal it should be tightened to 5 Nm (44 lb-in). Follow these steps to remove the nut for the battery ground cable terminal by tightening it to 23 Nm (17 lb-ft) and then remove the nut for the battery cable lower bracket to be tightened at 15 Nm (11 lb-ft) for 4.6L engines and 30 Nm (22 lb-ft) or 55 Nm (41 lb-ft) for 5.4L and 6.8L engines built before/after September 2005 respectively. Follow this order to separate the transmission cooler line clip from the battery cable lower bracket, then pull off the harness locator from the frame and take out the nut for the battery ground cable eyelet before tightening it to 8 Nm (71 lb-in). When reconnecting the generator cable and BJB terminals use a torque of 9 Nm (80 lb-in). You should finish the installation by reversing all steps of battery cable removal.

OEM Ford E-250 Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Battery Cables found

View related parts
Ford E-250 Battery Cable Part Number: CC2Z-14300-A
$118.04 MSRP: $163.30
You Save: $45.26 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Positive Cable Part Number: CC2Z-14300-H
$127.73 MSRP: $176.70
You Save: $48.97 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX
View related parts
Ford E-250 Negative Cable Part Number: XC2Z-14301-AA
$48.64 MSRP: $66.20
You Save: $17.56 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly; Battery Cable; Battery Cables; Ground Strap
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Battery Cable Part Number: 9C2Z-14300-VB
$136.03 MSRP: $216.00
You Save: $79.97 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Replaces: 9C2Z-14300-VA, WC-96100
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Battery Cable Part Number: 9C2Z-14300-SB
$136.14 MSRP: $224.00
You Save: $87.86 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Replaces: 9C2Z-14300-SA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Positive Cable Part Number: YC2Z-14300-CA
Product Specifications
- Other Name: Cable Assembly - Battery; Battery Cables; Cable Assembly - Battery To Battery
- Manufacturer Note: Complete asy, positive and negative battery cables, gas
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Positive Cable Part Number: XC2Z-14300-DA
Product Specifications
- Other Name: Cable - Battery To Starter; Battery Cables; Cable - Battery To Starter Motor
- Manufacturer Note: All gas engines w/rear auxiliary battery, Auxiliary battery positive cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Battery Cable Part Number: 5C2Z-14300-BA
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Ford E-250 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Positive Cable Part Number: YC2Z-14300-BA
Product Specifications
- Other Name: Cable Assembly - Battery; Battery Cables; Cable Assembly - Battery To Battery
- Manufacturer Note: Complete asy, positive and negative battery cables, gas
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Positive Cable Part Number: YC2Z-14300-AA
Product Specifications
- Other Name: Cable Assembly - Battery; Battery Cables; Cable Assembly - Battery To Battery
- Manufacturer Note: Complete asy, positive and negative battery cables, gas
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Negative Cable Part Number: XC2Z-14301-BA
Product Specifications
- Other Name: Cable Assembly; Battery Cable; Battery Cables; Ground Strap
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base
View related parts
Ford E-250 Battery Cable Part Number: CC2Z-14300-AYA
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Positive Cable Part Number: CC2Z-14300-AXA
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX
View related parts
Ford E-250 Battery Cable Part Number: 9C2Z-14300-RB
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Replaces: 9C2Z-14300-RA, WC-96098
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX
View related parts
Ford E-250 Battery Cable Part Number: 9C2Z-14300-JA
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L FLEX
View related parts
Ford E-250 Battery Cable Part Number: 5C2Z-14300-AA
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Positive Cable Part Number: 4C2Z-14300-JA
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-250 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Battery Cable Part Number: 4C2Z-14300-HA
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2009 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Battery Cable Part Number: 9C2Z-14300-HA
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG

Ford E-250 Battery Cable

OEM Battery Cable boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Battery Cable with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

From this Ford E-250 Battery Cable is one of the part that is know for its reliability and it plays a vital role in transmitting electricity from the battery to other parts of the car. This Battery Cable is precision made for the Ford E-250, it is, however, important in allowing the starter to crank the engine with undue ease. There is always the problem of deterioration of the battery cables through oxidation and corrosion over time, which hampers their performance. Hence, the preservation of the Ford E-250 Battery Cable is something that should be defended to the later so as to support the proper working of vehicles. This Battery Cable is designed for use with several E-250 models, which means that it is a reliable addition to any car, increase its performance and safety. There is a positive cable for power delivery and a negative cable for the grounding to create a closed circuit power delivery system relevant for Ford E-250 light commercial vehicles functionality. Surprisingly, the Ford E-250 Battery Cable is specially designed to cope with all forms of environmental shocks by extending its durability as well as reliability. This gives it a competitive edge in the automotive industry since its construction and designs are unique and tough to ensure drivers get their desired result from the intended use in their everyday lives. With the correct Ford E-250 Battery Cable, one can decrease the common types of starting problems, thereby improving the Ford E-250's safety and reliability.

Ford E-250 Battery Cable Parts and Q&A

Battery Cable
5C2Z-14300-BA
Q: How to service and repair the battery cables mounted on the frame on Ford E-250?
A:
The process of servicing battery cables attached to the frame starts with disconnecting the battery followed by battery removal from the car. The next step requires removal of the upper right battery tray bolt followed by loosening the remaining three bolts until torque reaches 40 Nm (30 lb-ft). Reinstall these bolts with this specified torque value. The battery tray can be unplugged from its bolts when you move it upwards while shifting it toward the right. It will then settle on the safety straps. When reinstalling the battery tray cover you should secure the two bolts at 7 Nm (62 lb-in). The battery terminal nuts can be stretched until the cables disconnect before re-tightening them to 15 Nm (11 lb-ft). Apply a torque of 14 Nm (10 lb-ft) when putting back the bolt which connects the frame-mounted battery harness to frame retainer. Dismantle the eight harness locators from the frame rail followed by the starter solenoid terminal cover then the starting solenoid positive cable nut before reinstallation that requires 12 Nm (9 lb-ft) torque setting. When reinstalling the starter solenoid wire terminal it should be tightened to 5 Nm (44 lb-in). Follow these steps to remove the nut for the battery ground cable terminal by tightening it to 23 Nm (17 lb-ft) and then remove the nut for the battery cable lower bracket to be tightened at 15 Nm (11 lb-ft) for 4.6L engines and 30 Nm (22 lb-ft) or 55 Nm (41 lb-ft) for 5.4L and 6.8L engines built before/after September 2005 respectively. Follow this order to separate the transmission cooler line clip from the battery cable lower bracket, then pull off the harness locator from the frame and take out the nut for the battery ground cable eyelet before tightening it to 8 Nm (71 lb-in). When reconnecting the generator cable and BJB terminals use a torque of 9 Nm (80 lb-in). You should finish the installation by reversing all steps of battery cable removal.