How to service and repair the brake master cylinder on Ford E-250 Econoline?

Start brake master cylinder service and repair operations by cleansing its exterior after vehicle removal and cleaning its external parts. Remove the brake fluid until empty by unfastening the filler cap which also requires removing roll pins before proceeding. The service process begins with detaching the brake master cylinder reservoir through careful prying before removing rubber grommets and fluid control valve and speed control deactivator switch and snap ring and the primary and secondary piston assembly. Replace the brake master cylinder bore if it shows any damage, follow this step by cleaning it with isopropyl alcohol before inspection. To assemble the new piston assembly use High-Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or Ford specification ESA-M6C25-A equivalent fluid for lubrication of seals. Then install the secondary piston assembly followed by the primary piston assembly and secure them with the snap ring. Firstly install the speed control deactivator switch together with the brake master cylinder fluid control valve when needed. New grommets require use with brake fluid before installation into a brake master cylinder through which the fluid level warning switch must also be connected. Push the reservoir against the grommets to make it snap securely into position then add roll pins if they are required. Add High-Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or its equivalent fluid into the reservoir before reassembling the brake master cylinder and sealing it with the cap. Last step before finishing is bleeding the brake master cylinder to achieve proper brake operations.

OEM Ford E-250 Econoline Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Brake Master Cylinders found

View related parts
Ford E-250 Econoline Master Cylinder Part Number: F7UZ-2140-EB
$94.35 MSRP: $128.39
You Save: $34.04 (27%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford E-250 Econoline | Base | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: 2C2Z-2140-AB
$143.13 MSRP: $194.77
You Save: $51.64 (27%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford E-250 Econoline | Base | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: F4TZ-2140-E
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Replaces: E7UZ-2140-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: 3C2Z-2140-DA
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Replaces: XC2Z-2140-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford E-250 Econoline | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: YC2Z-2140-DB
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford E-250 Econoline | Base | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: XC2Z-2004-A
Product Specifications
- Other Name: Kit - Master Cylinder; Brake Master Cylinder
- Replaces: XC2Z-2140-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford E-250 Econoline | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: F4TZ-2140-FA
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: F4TZ-2140-ED
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Manufacturer Note: 4x4 SRW with Speed Control 7.3 DSL.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: 2C2Z-2140-BA
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Manufacturer Note: Master cylinder, without speed control booster ID number 2C24-2B559-JB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford E-250 Econoline | Base | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: 1C2Z-2140-BB
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Master Cylinder Part Number: 1C2Z-2140-AA
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Manufacturer Note: Master cylinder, without speed control - with booster ID# 1C24-2B559-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

Ford E-250 Econoline Brake Master Cylinder

OEM Brake Master Cylinder boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Master Cylinder with long life and a perfect fit. Come to our website and find genuine Ford E-250 Econoline parts. We keep a wide inventory of OEM E-250 Econoline parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-250 Econoline Brake Master Cylinder Parts and Q&A

Master Cylinder
3C2Z-2140-DA
Q: How to service and repair the brake master cylinder on Ford E-250 Econoline?
A:
Start brake master cylinder service and repair operations by cleansing its exterior after vehicle removal and cleaning its external parts. Remove the brake fluid until empty by unfastening the filler cap which also requires removing roll pins before proceeding. The service process begins with detaching the brake master cylinder reservoir through careful prying before removing rubber grommets and fluid control valve and speed control deactivator switch and snap ring and the primary and secondary piston assembly. Replace the brake master cylinder bore if it shows any damage, follow this step by cleaning it with isopropyl alcohol before inspection. To assemble the new piston assembly use High-Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or Ford specification ESA-M6C25-A equivalent fluid for lubrication of seals. Then install the secondary piston assembly followed by the primary piston assembly and secure them with the snap ring. Firstly install the speed control deactivator switch together with the brake master cylinder fluid control valve when needed. New grommets require use with brake fluid before installation into a brake master cylinder through which the fluid level warning switch must also be connected. Push the reservoir against the grommets to make it snap securely into position then add roll pins if they are required. Add High-Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or its equivalent fluid into the reservoir before reassembling the brake master cylinder and sealing it with the cap. Last step before finishing is bleeding the brake master cylinder to achieve proper brake operations.