How to Service and Repair the Power Steering Cooler on Ford Edge?

In order to maintain the power steering cooler, drain the fluid out of the reservoir, loosen the front bumper cover, and loosen the return hoses. Take away cooler-to-subframe bolt (tighten to 9 Nm) and the cooler nuts (tighten to 7 Nm). Undo the process and fill the power steering system.

OEM Ford Edge Power Steering Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Coolers found

View related parts
Ford Edge Oil Cooler Part Number: 7T4Z-3D746-B
$170.75 MSRP: $263.50
You Save: $92.75 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - Cooling; Power Steering Cooler
- Replaces: 7T4Z-3D746-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Edge Oil Cooler, Front Part Number: BT4Z-3D746-A
$43.28 MSRP: $68.73
You Save: $25.45 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - Cooling; Power Steering Cooler, Front; Power Steering Cooler
- Position: Front
- Replaced by: CT4Z-3A713-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Ford Edge | Limited, SE, SEL, Sport | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

Ford Edge Power Steering Cooler

Welcome to our website where you can discover high-quality, genuine Ford Edge Power Steering Cooler. We offer an extensive inventory of OEM Ford Edge Power Steering Cooler at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Edge Power Steering Cooler Parts and Q&A

Oil Cooler
7T4Z-3D746-B
Q: How to Service and Repair the Power Steering Cooler on Ford Edge?
A: In order to maintain the power steering cooler, drain the fluid out of the reservoir, loosen the front Bumper cover, and loosen the return hoses. Take away cooler-to-subframe bolt (tighten to 9 Nm) and the cooler nuts (tighten to 7 Nm). Undo the process and fill the power steering system.