How to service the front bumper cover on Ford Escape?

Service of the front bumper cover requires removing six pin-type retainers which have three each side then continuing with the four front bumper cover bolts distributed across both sides. Beginning with front bumper cover servicing remove the two pin-type retainers that link front bumper cover to front fender from each side. Disengage all electrical connections from fog lamps that the vehicle possesses. Continue the process by removing the two lower front bumper cover bolts and also breaking the pin-type retainers. You must remove the two upper retaining bolts which both exist on the sides of the front bumper cover to release it from its mounting position. Population the front bumper cover by reversing the removal process while making sure it fits properly into bumper slides and transferring all essential components.

How to remove and replace the front bumper cover on Ford Escape?

The first step to remove and replace the front bumper cover involves placing tape on its corners and below the headlamp to stop paint damage. Set the vehicle in neutral mode then install the hoist beneath it. Start by taking out 6 pushpins from the front splash shield that have 3 each on the sides followed by the 4 fender splash shield-to-air deflector bolts positioned 2 each on both sides and torque both types of fasteners to 5 Nm (44 lb-in) when reattaching. The third step involves removing the 3 air deflector bolts before final installation will require 5 Nm (44 lb-in) torque tightening. You should detach the 2 front bumper cover center pushpins from the bumper cover as well as disconnect the fog lamp electrical connectors and the front parking aid sensor harness if equipped. The grille requires removal of its 2 bracket bolts for the radiator support section while you should apply 8 Nm torque (71 lb-in) for reinstalling the bolts. Re-install the front bumper cover by setting it into place before pressing the sides next to the bottom headlamp corner toward each other until it properly locks onto the bumper slides.

OEM Ford Escape Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

58 Bumpers found

View related parts
Ford Escape Bumper Cover, Front Part Number: LJ6Z-17D957-BAPTM
$658.67 MSRP: $975.80
You Save: $317.13 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover, Rear Part Number: LJ6Z-17K835-CC
$312.39 MSRP: $458.72
You Save: $146.33 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover, Rear Part Number: 8L8Z-17K835-APTM
$206.63 MSRP: $225.58
You Save: $18.95 (9%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 8L8Z-17K835-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2012 Ford Escape | Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Bumper Cover, Rear Part Number: LJ6Z-17K835-CA
$317.18 MSRP: $465.75
You Save: $148.57 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Escape | Active, Base, Plug-In Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Lower Cover, Front Part Number: LJ6Z-17D957-C
$243.24 MSRP: $357.18
You Save: $113.94 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Valance Panel, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Lower Cover, Front Part Number: GJ5Z-17D957-AC
$246.48 MSRP: $361.93
You Save: $115.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Valance Panel, Front
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17D957-BAPTM
$657.42 MSRP: $973.95
You Save: $316.53 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17K835-SEPTM
$497.47 MSRP: $779.98
You Save: $282.51 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Platinum, Platinum Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17D957-AAPTM
$565.54 MSRP: $837.83
You Save: $272.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17K835-SFPTM
$538.67 MSRP: $791.00
You Save: $252.33 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Platinum, Platinum Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Lower Cover, Front Part Number: LJ6Z-17D957-A
$212.09 MSRP: $311.43
You Save: $99.34 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Valance Panel, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Impact Bar, Front Part Number: LX6Z-17757-Q
$669.58 MSRP: $991.97
You Save: $322.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Lower Cover, Front Part Number: PJ6Z-17626-SAPTM
$248.84 MSRP: $365.40
You Save: $116.56 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17D957-CAPTM
$625.29 MSRP: $992.52
You Save: $367.23 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17K835-SDPTM
$390.16 MSRP: $572.92
You Save: $182.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Platinum, Platinum Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17K835-SCPTM
$434.67 MSRP: $638.28
You Save: $203.61 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Platinum, Platinum Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Impact Bar, Front Part Number: LX6Z-17757-H
$718.10 MSRP: $1139.83
You Save: $421.73 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2021 Ford Escape | S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover, Front Part Number: LJ6Z-17D957-AAPTM
$554.31 MSRP: $821.20
You Save: $266.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Lower Cover, Front Part Number: PJ6Z-17D957-A
$178.17 MSRP: $259.35
You Save: $81.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Lower Cover, Carbon Black Part Number: PJ6Z-17K835-SA
$175.15 MSRP: $254.95
You Save: $79.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Active, Base, Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)

| Page 1 of 3 |Next >

1-20 of 58 Results

Ford Escape Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Ford Escape parts. We keep a wide inventory of OEM Escape parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Escape Bumper Parts and Q&A

Bumper Cover, Front
YL8Z-17D957-EAA
Q: How to service the front bumper cover on Ford Escape?
A:
Service of the front bumper cover requires removing six pin-type retainers which have three each side then continuing with the four front bumper cover bolts distributed across both sides. Beginning with front bumper cover servicing remove the two pin-type retainers that link front bumper cover to front fender from each side. Disengage all electrical connections from fog lamps that the vehicle possesses. Continue the process by removing the two lower front bumper cover bolts and also breaking the pin-type retainers. You must remove the two upper retaining bolts which both exist on the sides of the front bumper cover to release it from its mounting position. Population the front bumper cover by reversing the removal process while making sure it fits properly into bumper slides and transferring all essential components.
Reinforcement, Front
9L8Z-17757-A
Q: How to remove and replace the front bumper cover on Ford Escape?
A:
The first step to remove and replace the front bumper cover involves placing tape on its corners and below the headlamp to stop paint damage. Set the vehicle in neutral mode then install the hoist beneath it. Start by taking out 6 pushpins from the front splash shield that have 3 each on the sides followed by the 4 fender splash shield-to-Air Deflector bolts positioned 2 each on both sides and torque both types of fasteners to 5 Nm (44 lb-in) when reattaching. The third step involves removing the 3 air deflector bolts before final installation will require 5 Nm (44 lb-in) torque tightening. You should detach the 2 front bumper cover center pushpins from the bumper cover as well as disconnect the fog lamp electrical connectors and the front parking aid sensor harness if equipped. The Grille requires removal of its 2 bracket bolts for the radiator support section while you should apply 8 Nm torque (71 lb-in) for reinstalling the bolts. Re-install the front bumper cover by setting it into place before pressing the sides next to the bottom headlamp corner toward each other until it properly locks onto the bumper slides.