How to service and repair the front bumper cover on Ford Escape?

Service and repair of the front bumper cover starts by applying tape at its corners and under the headlamps to protect paint surfaces. A hoist should receive the vehicle while it remains in neutral position. The service process starts by taking out the 6 pin-type retainers that contain 3 components each side and continues with the fender splash shield bolts which need 2 bolts per side while reinstallation requires tightening these bolts to 8 Nm (71 lb-in). The following task requires the removal of the four air deflector bolts before tightening them to 8 Nm (71 lb-in) when reinstalling. Then remove the 2 pin-type retainers located at the center of the front bumper cover and the 2 outer ones positioned on each side. Disable view fog lamps by taking off electrical connectors when present on the vehicle. The 2 upper bumper cover securing bolts need removal and subsequent installation with 8 Nm of torque (71 lb-in). The configuration of the front bumper cover installation requires placing the front bumper forward before applying medial pressure at the headlamp base to latch it into position on the bumper slides.

How to remove and replace the front bumper cover on Ford Escape?

The first step for bumper cover replacement requires applying tape on both corners and under each headlamp to minimize paint damage. Position the vehicle in the neutral gear on a hoist. Initiate the process by removing six scrivets inside the front splash shield where three scrivets are situated on each side. The front bumper replacement requires removing the fender splash shield-to-air deflector bolts from both sides before installation where the bolts should be tightened to 5 Nm (44 lb-in). You should take out the 3 air deflector bolts before their reinstallation by using 5 Nm (44 lb-in) torque value. You must remove the 2 front bumper cover center scrivets before disconnecting any fog lamp electrical connectors which may be present. The installation procedure requires disconnection of the 2 upper bolts that secure the front bumper cover followed by the cover removal. Reinstall these bolts at 8 Nm (71 lb-in) torque. The front bumper cover can be installed by repositioning and pressing on each side at the headlamp bottom corner until the bumper slides lock into place.

OEM Ford Escape Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

38 Bumper Covers found

View related parts
Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-BAA
$146.11 MSRP: $198.82
You Save: $52.71 (27%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Escape | Hybrid, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Bumper Cover, Front Part Number: CJ5Z-17D957-ACPTM
$399.73 MSRP: $466.98
You Save: $67.25 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Escape | S, SE, SEL, Titanium | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Escape Bumper Cover, Rear Part Number: GJ5Z-17K835-AC
$482.04 MSRP: $566.84
You Save: $84.80 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Escape Bumper Cover, Rear Part Number: CJ5Z-17K835-AB
$286.49 MSRP: $315.51
You Save: $29.02 (10%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Sterling Gray
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Escape | S, SE, SEL, Titanium | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Escape Bumper Cover, Front Part Number: GJ5Z-17757-APTM
$567.93 MSRP: $625.48
You Save: $57.55 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Escape Bumper Cover, Rear Part Number: GJ5Z-17K835-BA
$515.51 MSRP: $567.74
You Save: $52.23 (10%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | S, SE, SEL, Titanium | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17D957-CAPTM
$601.91 MSRP: $993.23
You Save: $391.32 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover, Rear Part Number: GJ5Z-17K835-EA
$249.52 MSRP: $371.32
You Save: $121.80 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | SE, SEL, Titanium | 4 Cyl 1.5 L GAS
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17K835-SEPTM
$573.68 MSRP: $849.90
You Save: $276.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17K835-SFPTM
$581.48 MSRP: $861.45
You Save: $279.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover, Front Part Number: LJ6Z-17D957-AAPTM
$576.03 MSRP: $853.38
You Save: $277.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17D957-AAPTM
$582.58 MSRP: $863.08
You Save: $280.50 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17D957-BAPTM
$706.39 MSRP: $1046.50
You Save: $340.11 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover, Front Part Number: LJ6Z-17D957-BAPTM
$682.19 MSRP: $1010.65
You Save: $328.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover, Front Part Number: AL8Z-17D957-BPTM
$226.84 MSRP: $333.10
You Save: $106.26 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Replaces: 8L8Z-17D957-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2012 Ford Escape | Ford Hybrid, Hybrid, Limited, Limited Hybrid, XLS, XLT | 2.3L L4, 2.5L L4, 3.0L V6, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Bumper Cover, Rear Part Number: LJ6Z-17K835-AA
$277.14 MSRP: $406.97
You Save: $129.83 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover, Rear Part Number: LJ6Z-17K835-CC
$337.34 MSRP: $495.37
You Save: $158.03 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover, Rear Part Number: LJ6Z-17K835-CA
$345.69 MSRP: $507.62
You Save: $161.93 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17K835-SDPTM
$390.16 MSRP: $572.92
You Save: $182.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Bumper Cover Part Number: PJ6Z-17K835-SCPTM
$484.16 MSRP: $710.95
You Save: $226.79 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)

| Page 1 of 2 |Next >

1-20 of 38 Results

Ford Escape Bumper Cover

OEM Bumper Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper Cover with long life and a perfect fit. Come to our website and find genuine Ford Escape parts. We keep a wide inventory of OEM Escape parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Escape Bumper Cover is a soft panel that hides the hard bumper underneath. It also enhances the aesthetics of the vehicle and allows air to flow smoothly for a fuel and speed benefit. This Bumper Cover panel installs over the impact bar beneath. It may also have formed holes to allow air into the radiator, oil cooler, power steering cooler, or brakes, and cutouts for fog lights, parking lights, turn signals, or cornering lights. Decorative screws, bezels, or trim rings fasten within these spaces, and removable covers can disguise tow hook anchor points or unused light locations to keep the surface consistent when those elements are not present. The assembly strikes the Bumper Cover, and the outer panel often sustains the first cosmetic damage. The inner bumper usually remains undamaged, so it is often the only panel that gets replaced. Weather, UV exposure, and road debris can also cause the Bumper Cover to fade or crack and cause it to break. Thus, they need to be checked and replaced when needed to keep the Ford Escape looking new and safe. Ford's design of the part is to integrate with the overall body shape of the Escape, and using the properly matched Bumper Cover helps restore the original styling and aerodynamic intent for any involved Ford Escape.

Ford Escape Bumper Cover Parts and Q&A

Bumper Cover, Front
5L8Z-17D957-BAA
Q: How to service and repair the front bumper cover on Ford Escape?
A:
Service and repair of the front bumper cover starts by applying tape at its corners and under the headlamps to protect paint surfaces. A hoist should receive the vehicle while it remains in neutral position. The service process starts by taking out the 6 pin-type retainers that contain 3 components each side and continues with the fender splash shield bolts which need 2 bolts per side while reinstallation requires tightening these bolts to 8 Nm (71 lb-in). The following task requires the removal of the four air deflector bolts before tightening them to 8 Nm (71 lb-in) when reinstalling. Then remove the 2 pin-type retainers located at the center of the front bumper cover and the 2 outer ones positioned on each side. Disable view fog lamps by taking off electrical connectors when present on the vehicle. The 2 upper bumper cover securing bolts need removal and subsequent installation with 8 Nm of torque (71 lb-in). The configuration of the front bumper cover installation requires placing the front bumper forward before applying medial pressure at the headlamp base to latch it into position on the bumper slides.
Bumper Cover, Front
8L8Z-17D957-CPTM
Q: How to remove and replace the front bumper cover on Ford Escape?
A:
The first step for bumper cover replacement requires applying tape on both corners and under each headlamp to minimize paint damage. Position the vehicle in the neutral gear on a hoist. Initiate the process by removing six scrivets inside the front splash shield where three scrivets are situated on each side. The front bumper replacement requires removing the fender splash shield-to-Air Deflector bolts from both sides before installation where the bolts should be tightened to 5 Nm (44 lb-in). You should take out the 3 air deflector bolts before their reinstallation by using 5 Nm (44 lb-in) torque value. You must remove the 2 front bumper cover center scrivets before disconnecting any fog lamp electrical connectors which may be present. The installation procedure requires disconnection of the 2 upper bolts that secure the front bumper cover followed by the cover removal. Reinstall these bolts at 8 Nm (71 lb-in) torque. The front bumper cover can be installed by repositioning and pressing on each side at the headlamp bottom corner until the bumper slides lock into place.