How to Service and Repair the Rear Drive Shaft for 4x2 with 137-Inch and 141-Inch Wheelbases on Ford Excursion?

In order to service the rear driveshaft of 4x2 vehicles, place the vehicle elevated and index/mark parts. Take off the driveshaft, tape bearings cups, and plug the transmission. Apply lubricant to the slip-yoke spline, position index marks and fit new bolts. Bolts of Excursion should be tightened evenly and the vehicle brought low after fitting all the parts.

How to Service and Repair the One-Piece Drive Shaft for 4x4 with 137-, 141-, and 142-Inch Wheelbases on Ford Excursion?

Raising the vehicle index-marking the driveshaft yoke and flanges To service the one-piece driveshaft used in 4x4 vehicles, raise the vehicle and mark the driveshaft yoke and flanges. Take off bolts and U-joint retainers, take off driveshaft, and tape bearings cups. Reassemble using the marks and use new bolts and tighten them all evenly then lower the vehicle.

OEM Ford Excursion Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Drive Shafts found

View related parts
Ford Excursion Drive Shaft Part Number: 5C3Z-4A376-D
$435.84 MSRP: $590.77
You Save: $154.93 (27%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2001 Ford Excursion | Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Axle Shaft, Front Passenger Side Part Number: 4C3Z-3219-BA
$454.45 MSRP: $667.33
You Save: $212.88 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Axle Shaft Assembly; Axle Assembly
- Position: Front Passenger Side
- Replaces: 3C3Z-3219-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Axle Shaft, Front Driver Side Part Number: 4C3Z-3220-BA
$410.76 MSRP: $603.17
You Save: $192.41 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Axle Shaft Assembly; Axle Assembly
- Position: Front Driver Side
- Replaces: 3C3Z-3220-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Drive Shaft Part Number: 5C3Z-4A376-A
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2001 Ford Excursion | Limited, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Excursion Drive Shaft Part Number: YC3Z-4602-CA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford Excursion | Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Excursion Drive Shaft Part Number: F81Z-4602-DTB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2001 Ford Excursion | Limited, XLT | 10 Cyl 6.8 L GAS
View related parts
Ford Excursion Drive Shaft Part Number: 5C3Z-4A376-CA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Excursion Drive Shaft Part Number: 3C7Z-4602-BA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Manufacturer Note: Parts List No. 501, 4x2
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Drive Shaft Part Number: 3C7Z-4602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Manufacturer Note: Parts List No. 500, 4x4
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Drive Shaft Part Number: 2C7Z-4602-HA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Excursion Drive Shaft Part Number: 2C7Z-4602-GA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Excursion Drive Shaft Part Number: 2C7Z-4602-FA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
Ford Excursion Drive Shaft Part Number: 2C7Z-4602-EA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
Ford Excursion Drive Shaft Part Number: 2C7Z-4602-DA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Excursion | Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Drive Shaft Part Number: 2C7Z-4602-CA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Excursion | Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Drive Shaft Part Number: 2C7Z-4602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS

Ford Excursion Drive Shaft

Welcome to our website where you can discover high-quality, genuine Ford Excursion Drive Shaft. We offer an extensive inventory of OEM Ford Excursion Drive Shaft at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Excursion Drive Shaft Parts and Q&A

Drive Shaft
5C3Z-4A376-CA
Q: How to Service and Repair the Rear Drive Shaft for 4x2 with 137-Inch and 141-Inch Wheelbases on Ford Excursion?
A: In order to service the rear driveshaft of 4x2 vehicles, place the vehicle elevated and index/mark parts. Take off the driveshaft, tape bearings cups, and plug the transmission. Apply lubricant to the slip-yoke spline, position index marks and fit new bolts. Bolts of Excursion should be tightened evenly and the vehicle brought low after fitting all the parts.
Drive Shaft
5C3Z-4A376-D
Q: How to Service and Repair the One-Piece Drive Shaft for 4x4 with 137-, 141-, and 142-Inch Wheelbases on Ford Excursion?
A: Raising the vehicle index-marking the driveshaft yoke and flanges To service the one-piece driveshaft used in 4x4 vehicles, raise the vehicle and mark the driveshaft yoke and flanges. Take off bolts and U-joint retainers, take off driveshaft, and tape bearings cups. Reassemble using the marks and use new bolts and tighten them all evenly then lower the vehicle.