How to Service and Repair the Fog Light on Ford Excursion?

Begin services and repairs on the fog/driving lamp by detaching any front license plate frame you have installed. First disconnect the electrical connector from the fog lamp bracket then remove the bolts and fog lamp assembly while taking away the pin-type retainers and the adjustment bolt. Users should pull retaining tabs outward to uninstall the fog lamp while changing a fog lamp bulb requires physical installation. Reinstall the product using the opposite steps from removal. You should check all these prerequisites for fog lamp assembly adjustment: correct tire pressure, no unnecessary vehicle weight beyond half fuel tank capacity, level ground surface and clear, functioning fog and headlamps. Unlike other vehicles the Voito Ojeo does not need horizontal aiming adjustment since this functionality is not adjustable therefore check with your state vehicle inspection facility for visual aiming tolerance recommendations. Set the vehicle on flat terrain at a distance of 7.6 meters (25 ft) next to a vertical surface which extends at least 2.4 meters (8 ft) wide. To achieve proper visibility from fog lamps keep the top portion of illuminating area exactly 10 cm (4 inches) below the horizontal center of the lamps.

OEM Ford Excursion Fog Light

Fog Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fog Lights found

View related parts
Ford Excursion Fog Lamp, Front Driver Side
Part Number: 6C3Z-15201-A
$34.12 MSRP: $49.67
You Save: $15.55 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly - Fog - Front; Fog Light, Front Left; Fog Light Assembly; Other Lamp; Fog Light; Fog Lamp Assembly
- Position: Front Driver Side
- Replaces: 5C3Z-15200-BA, 6C3Z-15200-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Fog Lamp, Front Passenger Side
Part Number: 6C3Z-15200-A
$36.41 MSRP: $53.00
You Save: $16.59 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly - Fog - Front; Fog Light, Front Right; Fog Light Assembly; Other Lamp; Fog Light; Fog Lamp Assembly
- Position: Front Passenger Side
- Replaces: 5C3Z-15200-AA, 6C3Z-15200-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Fog Lamp, Front Driver Side
Part Number: 3C3Z-15200-BA
Product Specifications
- Other Name: Lamp Assembly - Fog - Front; Fog Light, Front Left; Fog Light Assembly; Fog Lamp - LH; Other Lamp; Fog Lamp Assembly; Fog Light
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Fog Lamp, Front Passenger Side
Part Number: 3C3Z-15200-AA
Product Specifications
- Other Name: Lamp Assembly - Fog - Front; Fog Light, Front Right; Fog Light Assembly; Fog Lamp - RH; Other Lamp; Fog Lamp Assembly; Fog Light
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Fog Lamp
Part Number: YC3Z-15200-AA
Product Specifications
- Other Name: Kit - Fog Lamp - Round; Fog Light; Fog Lamp Assembly
- Manufacturer Note: Kit to add fog lamps, less production fog lamps and autolamps
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005, 2000 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Fog Lamp, Front
Part Number: XC3Z-15200-AA
Product Specifications
- Other Name: Lamp Assembly - Fog Front; Fog Light, Front; Fog Light Assembly; Fog Lamp Assembly; Lamp Assembly - Fog - Front; Fog Light
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Fog Lamp Assembly, Front
Part Number: 1C3Z-15200-BB
Product Specifications
- Other Name: Lamp Assembly - Fog Front; Fog Light; Lamp Assembly - Fog - Front
- Manufacturer Note: Kit to add fog lamps, same style as production fog lamps
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

Ford Excursion Fog Light

Welcome to our website where you can discover high-quality, genuine Ford Excursion Fog Light. We offer an extensive inventory of OEM Ford Excursion Fog Light at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Excursion Fog Light Parts Questions & Experts Answers

Fog Lamp, Front Passenger Side
3C3Z-15200-AA
Q: How to Service and Repair the Fog Light on Ford Excursion?
A: Begin services and repairs on the fog/driving lamp by detaching any front license plate frame you have installed. First disconnect the electrical connector from the fog lamp bracket then remove the bolts and fog lamp assembly while taking away the pin-type retainers and the adjustment bolt. Users should pull retaining tabs outward to uninstall the fog lamp while changing a fog lamp bulb requires physical installation. Reinstall the product using the opposite steps from removal. You should check all these prerequisites for fog lamp assembly adjustment: correct tire pressure, no unnecessary vehicle weight beyond half fuel tank capacity, level ground surface and clear, functioning fog and headlamps. Unlike other vehicles the Voito Ojeo does not need horizontal aiming adjustment since this functionality is not adjustable therefore check with your state vehicle inspection facility for visual aiming tolerance recommendations. Set the vehicle on flat terrain at a distance of 7.6 meters (25 ft) next to a vertical surface which extends at least 2.4 meters (8 ft) wide. To achieve proper visibility from fog lamps keep the top portion of illuminating area exactly 10 cm (4 inches) below the horizontal center of the lamps.