How to service and repair the front cross-member and transmission support crossmember on Ford Excursion?

The first step for front cross-member and transmission support crossmember repair on Excursion vehicles is to secure the vehicle on a hoist in neutral position. A suitable high-lift transmission jack enables the support of the transmission. Commence by removing the wire harness from the rear crossmember before you take off the LH crossmember bolts and nuts as well as the RH crossmember bracket bolts and nuts and the rear transmission mount nuts and crossmember. Install the crossmember at the transmission mount by first installing one loose nut to maintain its position. Begin the installation by fastening the LH crossmember bolts and then proceed with tightening the RH crossmember bolts and finally secure the rear insulator nuts. Reconnect the wire harness to the rear part of the crossmember as the last installation step.

OEM Ford Excursion Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Front Cross-Members found

View related parts
Ford Excursion Front Crossmember Part Number: F81Z-2510776-AA
$151.71 MSRP: $220.83
You Save: $69.12 (32%)
ADD TO CART
Product Specifications
- Other Name: Member Assembly - Cross Center; Floor Pan Crossmember, Center, Front; Crossmember; Member Assembly - Cross - Center
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Front Crossmember, Driver Side Part Number: F81Z-2510685-AA
Product Specifications
- Other Name: Cross Member Assembly - Front; Floor Pan Reinforcement, Left; Floor Pan Crossmember, Left; Floor Crossmember
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Rail End Part Number: YC3Z-5C145-AA
Product Specifications
- Other Name: Frame Assembly; Frame Rail End
- Manufacturer Note: Note: use the service manual frame rivet repair procedure to replace the OEM rivets with bolts , BEFORE 11/04/02
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Excursion | Eddie Bauer, Limited, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Front Crossmember, Outer Passenger Side Part Number: F81Z-2510684-AA
Product Specifications
- Other Name: Cross Member Assembly - Front; Floor Pan Reinforcement, Right; Floor Pan Crossmember, Right; Floor Crossmember
- Position: Front Outer Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Front Crossmember Part Number: 4C3Z-5C128-AB
Product Specifications
- Other Name: Crossmember; Frame Crossmember, Front
- Manufacturer Note: Front lower blocker beam, Use W710065-S439 and N811403-S426 to attach, FROM 12/01/03
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Rail End, Front Part Number: 3C3Z-5C145-AA
Product Specifications
- Other Name: Frame Assembly; Frame Rail End, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

Ford Excursion Front Cross-Member

OEM Front Cross-Member boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Front Cross-Member with long life and a perfect fit. Come to our website and find genuine Ford Excursion parts. We keep a wide inventory of OEM Excursion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Excursion Front Cross-Member Parts and Q&A

Front Crossmember
F81Z-2510776-AA
Q: How to service and repair the front cross-member and transmission support crossmember on Ford Excursion?
A:
The first step for front cross-member and transmission support crossmember repair on Excursion vehicles is to secure the vehicle on a hoist in neutral position. A suitable high-lift transmission jack enables the support of the transmission. Commence by removing the wire harness from the rear crossmember before you take off the LH crossmember bolts and nuts as well as the RH crossmember bracket bolts and nuts and the rear transmission mount nuts and crossmember. Install the crossmember at the transmission mount by first installing one loose nut to maintain its position. Begin the installation by fastening the LH crossmember bolts and then proceed with tightening the RH crossmember bolts and finally secure the rear insulator nuts. Reconnect the wire harness to the rear part of the crossmember as the last installation step.