How to Service the Engine Control Module (ECM) on Ford Expedition?

The battery ground cable should be disconnected as the first step to access the Powertrain Control Module (PCM). Connect the diagnostic tool to the vehicle while it obtains both the identification of the vehicle and all programmable module information automatically. Start with PCM electrical connector separation before unfastening the four bolts which maintain the PCM in place. Tighten the reinstalled bolts at 7 Nm (62 lb-in). You should uninstall the three bracket bolts before PCM bracket servicing but reinstall them with 10 Nm (89 lb-in) torque. The completion of the installation requires you to perform the removal steps in reverse order.

How to remove and replace the Engine Control Module on Ford Expedition?

When installing a new Engine Control Module start by connecting the scan tool to the vehicle which will help identify the setup information while ensuring correct connection of the Vehicle Communication Module (VCM). Each component starts with taking off the battery ground cable followed by removing three PCM electrical connections. First secure the PCM with two stud bolts then remove the module followed by installing a new module while torquing the bolts to 9 Nm (80 lb-in). Resetting both parameters in the modules before changes to Instrument Cluster or PCM will prevent Passive Anti-Theft System (PATS) no-start conditions even without existing PATS equipment. The next step involves using a scan tool to run the Misfire Monitor Neutral Profile Correction procedure and following the on-screen commands.

OEM Ford Expedition Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

43 Engine Control Modules found

View related parts
Ford Expedition ECM Part Number: AL3Z-12A650-EMANP
$568.13 MSRP: $841.67
You Save: $273.54 (33%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module
- Replaces: 9U7Z-12A650-AK, AL3Z-12A650-BBD, AL3Z-12A650-FGA, AL3Z-12A650-DFA, AL3Z-12A650-EBA, AL3Z-12A650-DMA, AL3Z-12A650-ENA, AL3Z-12A650-CFC, AL3Z-12A650-DYA, AL1Z-12A650-ATC, AL1Z-12A650-BJA, AL3Z-12A650-DHA, AL3Z-12A650-DRA, AL3Z-12A650-DZA, AL3Z-12A650-BFD, AL3Z-12A650-DJA, AL3Z-12A650-ELA, AL3Z-12A650-FHA, AL3Z-12A650-BRD, AL3Z-12A650-CGC, AL1Z-12A650-AUC, AL1Z-12A650-BDA, AL3Z-12A650-FEA, AL3Z-12A650-CVA, 9L1Z-12A650-HC, AL3Z-12A650-CHB, AL3Z-12A650-DUA, AL3Z-12A650-EJA, AL3Z-12A650-FFA, AL1Z-12A650-BEA, AL1Z-12A650-BGA, AL3Z-12A650-BCD, AL3Z-12A650-BLD, AL3Z-12A650-CDC, 9U7Z-12A650-AG, AL3Z-12A650-EFA, AL3Z-12A650-ETA, AL1Z-12A650-BAA, 9U7Z-12A650-BA, AL1Z-12A650-BLA, AL1Z-12A650-BFA, AL1Z-12A650-BHA, AL3Z-12A650-EHA, AL1Z-12A650-AYB, BL1Z-12A650-NA, AL3Z-12A650-BDD, AL3Z-12A650-EMA, BL1Z-12A650-JA, 9U7Z-12A650-BC, 9L1Z-12A650-JC, 9L1Z-12A650-FC, AL3Z-12A650-CEC, AL3Z-12A650-CHC, AL1Z-12A650-BCB, AL3Z-12A650-BED, AL3Z-12A650-BMD, AL3Z-12A650-DKA, AL3Z-12A650-CTA, AL3Z-12A650-BHD, AL3Z-12A650-CSA, AL3Z-12A650-FDA, AL3Z-12A650-BSD, AL3Z-12A650-EKA, 9L1Z-12A650-GC, AL1Z-12A650-BMA, AL3Z-12A650-BKD, AL3Z-12A650-BND, AL3Z-12A650-DNA, AL3Z-12A650-DPA, AL3Z-12A650-AZE, AL3Z-12A650-BTD, AL3Z-12A650-EUA, AL3Z-12A650-CUA, AL3Z-12A650-ERA, BL1Z-12A650-HA, AL3Z-12A650-EDA, AL3Z-12A650-BUD, AL3Z-12A650-DSA, AL1Z-12A650-BKA, AL3Z-12A650-ECA, BL1Z-12A650-KA, AL3Z-12A650-CXA, AL3Z-12A650-DGA, AL3Z-12A650-EGA, AL1Z-12A650-ASC, AL3Z-12A650-DVA, BL1Z-12A650-GA, AL3Z-12A650-DEA, AL3Z-12A650-DLA, BL1Z-12A650-LA, AL1Z-12A650-AZB, AL1Z-12A650-BBA, AL3Z-12A650-BJD, AL3Z-12A650-ESA, BL1Z-12A650-MA, AL3Z-12A650-EEA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition ECM Part Number: 7U7Z-12A650-DSA
$617.63 MSRP: $915.00
You Save: $297.37 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module
- Replaced by: 7U7Z-12A650-DSB
- Replaces: 7L1Z-12A650-AHC, 7L1Z-12A650-AHD, 7L1Z-12A650-AHB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 7U7Z-12A650-AGD
$415.41 MSRP: $610.00
You Save: $194.59 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module
- Replaces: 7U7Z-12A650-AGC, 7U7Z-12A650-AGA, 7U7Z-12A650-AGB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL Limited, EL XLT, Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: NL7Z-12A650-GA
$876.38 MSRP: $1298.33
You Save: $421.95 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition ECM Part Number: 8L1Z-12A650-BB
$687.38 MSRP: $1018.33
You Save: $330.95 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module; Module - Engine Control - Eec V
- Manufacturer Note: 8B714J0B06 (BFN1)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 7U7Z-12A650-AFD
$693.00 MSRP: $1026.67
You Save: $333.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module
- Replaces: 7U7Z-12A650-AFC, 7U7Z-12A650-AFB, 7U7Z-12A650-AFA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL Limited, EL XLT, Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 7U7Z-12A650-DRA
$748.13 MSRP: $1108.33
You Save: $360.20 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module
- Replaces: 7L1Z-12A650-AGC, 7L1Z-12A650-AGD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: NL7Z-12A650-EA
$326.88 MSRP: $480.00
You Save: $153.12 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max XL, Max XLT, Platinum, XL, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Control Module Part Number: 2U7Z-12A650-DYA
$448.64 MSRP: $612.66
You Save: $164.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module; ECM
- Replaces: 2L3Z-12A650-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Expedition | Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 9L1Z-12A650-DL
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Manufacturer Note: 9B714G0513 (GJN0)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Control Module Part Number: 1L1Z-12A650-BD
Product Specifications
- Other Name: Module - Engine Control; PCM
- Manufacturer Note: Powertrain Control Module (PCM) #1L1F 12A650-BD (EEC-V)TYPE:MLC-496A (REPROGRAMMABLE)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Control Module Part Number: 1L1Z-12A650-CBB
Product Specifications
- Other Name: Module - Engine Control
- Manufacturer Note: Powertrain Control Module(PCM) #1L1F 12A650-CB (EEC-V)TYPE:MPC-141-(REPROGRAMMABLE)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition ECM Part Number: 2U7Z-12A650-ALA
Product Specifications
- Other Name: Module - Engine Control; Engine Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 5L1Z-12A650-DF
Product Specifications
- Other Name: Module - Engine Control; Engine Control Module (ECM); Engine Control Module
- Replaces: 5L1Z-12A650-DE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, XLS, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Control Module Part Number: 5L1Z-12A650-JF
Product Specifications
- Other Name: Module - Engine Control; Engine Control Module (ECM); Engine Control Module; ECM
- Replaces: 5L1Z-12A650-JE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, XLS, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 5L1Z-12A650-LF
Product Specifications
- Other Name: Module - Engine Control; Engine Control Module (ECM); Engine Control Module
- Replaces: 5L1Z-12A650-LE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, XLS, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 7L1Z-12A650-ABE
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Manufacturer Note: 7B714K0A10 (BTM4)
- Replaces: 7L1Z-12A650-ABD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 7L1Z-12A650-ADE
Product Specifications
- Other Name: Module - Engine Control; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Manufacturer Note: 7B714K0B10 (DVD4)
- Replaces: 7L1Z-12A650-ADD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 7L1Z-12A650-AEB
Product Specifications
- Other Name: Module - Engine Control; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Manufacturer Note: 7B714J0A10 (PVE1)
- Replaces: 7L1Z-12A650-AEA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition ECM Part Number: 7L1Z-12A650-AFB
Product Specifications
- Other Name: Module - Engine Control; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Manufacturer Note: 7B714J0B10 (AFS1)
- Replaces: 7L1Z-12A650-AFA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

| Page 1 of 3 |Next >

1-20 of 43 Results

Ford Expedition Engine Control Module

OEM Engine Control Module boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Control Module with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The ECM of the Ford Expedition is a crucial part of the aspect since it demonstrates Ford organization's dedication to reliability and performance in the full-size SUV segment. Located in the Ford Expedition, the Engine Control Module collects information from many sensors, which helps the car's engine run efficiently with the optimal fuel-air combination and using the correct ignition sequence. Apart for improving the productivity of Ford Expedition, this advanced ECM has a vital safety function that involves monitoring and control in real-time. The Engine Control Module is used in Expedition models including the early models; however, they are different from the current microprocessor-based ones that support new features such as variable valve timing. Due to the fact that the Ford Expedition's ECM can also act as the powertrain control module or the PCM, coordinating all the functions involving both the engine and the transmission, the unit has a competitive edge in the automotive market. Also, the ECM offers the option of tuning and setting up to meet the requirements of different customers with Expedition. Due to long service delivery and durability, the Ford Expedition has stood the test; therefore, the Engine Control Module plays a crucial role in continuing that tradition. Thus, the Ford Expedition Engine Control Module not only improves driving experience but also strengthens the company's commitment to the further development of innovations in the given segment of automobiles.

Ford Expedition Engine Control Module Parts and Q&A

Control Module
5L1Z-12A650-JF
Q: How to Service the Engine Control Module (ECM) on Ford Expedition?
A:
The battery ground cable should be disconnected as the first step to access the Powertrain Control Module (PCM). Connect the diagnostic tool to the vehicle while it obtains both the identification of the vehicle and all programmable module information automatically. Start with PCM electrical connector separation before unfastening the four bolts which maintain the PCM in place. Tighten the reinstalled bolts at 7 Nm (62 lb-in). You should uninstall the three bracket bolts before PCM bracket servicing but reinstall them with 10 Nm (89 lb-in) torque. The completion of the installation requires you to perform the removal steps in reverse order.
ECM
7L1Z-12A650-ABE
Q: How to remove and replace the Engine Control Module on Ford Expedition?
A:
When installing a new Engine Control Module start by connecting the scan tool to the vehicle which will help identify the setup information while ensuring correct connection of the Vehicle Communication Module (VCM). Each component starts with taking off the battery ground cable followed by removing three PCM electrical connections. First secure the PCM with two stud bolts then remove the module followed by installing a new module while torquing the bolts to 9 Nm (80 lb-in). Resetting both parameters in the modules before changes to Instrument Cluster or PCM will prevent Passive Anti-Theft System (PATS) no-start conditions even without existing PATS equipment. The next step involves using a scan tool to run the Misfire Monitor Neutral Profile Correction procedure and following the on-screen commands.