How to Service and Repair the Automatic Transmission Shifter Mechanism on Ford Expedition?

The first step to repair the selector lever mechanism involves removing the instrument panel lower finish panel after which one must unscrew the steering column lower shroud. Services on the steering column upper shroud along with the instrument panel cluster-to-shroud trim need to be performed. The instrument panel cluster trim requires removal of screws from both right-hand and left-hand locations before extracting the trim from the panel. Remove the IP cluster trim first by disconnecting both the temperature sensor connector and dimmer switch electrical connector from their respective places. The first step includes unscrewing the upper IP cluster screws together with the right-hand and left-hand lower IP cluster screws for placing the IP cluster to the side. Drain the selector lever cable before removing the locking pin as well as park lock cable (PLC) and discard the locking pin when done. You must first disconnect the transmission control switch electrical connector along with its harness strap from its retaining clips before removing the selector lever bolt and the selector lever itself. The procedure requires users to disconnect the BSIA electrical connector after removing the selector lever mechanism lower bolt and securing the upper bolts before extractor the selector lever mechanism. Place the BSIA after pulling its override button while guiding the selector lever tab within the opening and fastening it using a screw and clip. After installing the BSIA to the selector lever mechanism you should mount the mechanism into the vehicle where you must apply 6 Nm (53 lb-in) torque when securing the upper bolts while connecting the BSIA electrical connector. Secure the selector lever mechanism lower bolt making sure it reaches 6 Nm (53 lb-in) torque specification. After that tighten the selector lever to achieve 18 Nm (13 lb-ft). Connect the PLC electrical chain to the retaining hooks after which the technician installs a fresh locking pin. Install the IP cluster with proper positioning then fasten first the left-hand and right-hand lower IP cluster screws before using the upper IP cluster screws. Reinstall the selector lever cable and position the IP cluster. Reinstall the IP cluster trim and join the dimmer switch electrical connection. In case of equipment presence, reconnect the in-vehicle temperature sensor connector. Accomplish the installation of the left-hand and right-hand IP cluster trim screws before putting the IP cluster-to-shroud trim and steering column upper shroud in place. Continue with the addition of the steering column lower shroud and instrument panel lower finish panel.

OEM Ford Expedition Automatic Transmission Shifter

AT Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

31 Automatic Transmission Shifters found

View related parts
Ford Expedition Shifter, Camel/Gray Part Number: AL1Z-7210-AD
$371.95 MSRP: $463.83
You Save: $91.88 (20%)
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: Greystone
- Replaces: CL1Z-7210-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford Expedition | EL XLT, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Shift Lever Part Number: 4L3Z-7210-BAA
$166.25 MSRP: $242.00
You Save: $75.75 (32%)
ADD TO CART
Product Specifications
- Other Name: Lever - Transmission Gear Shift; Automatic/Manual Control Lever.; Gear Shift Assembly; Gearshift Lever
- Manufacturer Note: Includes overdrive cancel button, wiring, and cap. Graphics: "Overdrive Off".
- Replaces: 1L3Z-7210-CAA, YL3Z-7210-BB, F65Z-7210-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Shifter Part Number: FL1Z-7210-CA
$484.09 MSRP: $759.00
You Save: $274.91 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: MESA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Gear Shift Assembly Part Number: JL1Z-7P155-U
$279.66 MSRP: $410.67
You Save: $131.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Selector Assembly - Transmission; Shift Lever
- Replaces: JL1Z-7P155-Q, JL1Z-7P155-L, JL1Z-7D443-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Shift Actuator Part Number: NL1Z-7P155-A
$268.43 MSRP: $394.17
You Save: $125.74 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Selector Assembly - Transmission; Gear Shift Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Shifter Part Number: AL1Z-7210-BA
$402.02 MSRP: $590.33
You Save: $188.31 (32%)
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: Curly Koa
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Expedition | Eddie Bauer, EL Eddie Bauer | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Shift Actuator Part Number: NL1Z-7P155-B
$265.93 MSRP: $390.50
You Save: $124.57 (32%)
ADD TO CART
Product Specifications
- Other Name: Selector Assembly - Transmission; Gear Shift Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Gear Shift Assembly, Camel Part Number: 9L1Z-7210-B
$245.71 MSRP: $339.92
You Save: $94.21 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shifter; Shift Lever
- Manufacturer Note: Greystone
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Expedition | EL XLT, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Shifter, Charcoal Part Number: AL1Z-7210-AA
$193.39 MSRP: $267.54
You Save: $74.15 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Expedition | EL XLT, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Gear Shift Assembly, Camel Part Number: AL1Z-7210-EB
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever; Shifter
- Replaces: AL1Z-7210-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Expedition | EL XLT, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Shifter Part Number: 8L1Z-7210-B
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: Curly Koa
- Replaces: 7L1Z-7210-T, 7L1Z-7210-Z
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Expedition | Eddie Bauer, EL Eddie Bauer | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Shifter Part Number: 8L1Z-7210-C
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Expedition | EL King Ranch, King Ranch | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Shifter, Charcoal Part Number: 8L1Z-7210-D
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: Charcoal Black
- Replaces: 7L1Z-7210-R, 7L1Z-7210-W
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Expedition | EL XLT, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Gear Shift Assembly, Camel Part Number: 8L1Z-7210-E
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shifter; Shift Lever
- Manufacturer Note: Greystone
- Replaces: 7L1Z-7210-V, 7L1Z-7210-X
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Expedition | EL XLT, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Shifter, Charcoal Part Number: 9L1Z-7210-A
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: Charcoal Black
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Expedition | EL XLT, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Shifter Part Number: 9L1Z-7210-C
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: Mahogany
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Expedition | EL Limited, Limited | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Shifter Part Number: 9L1Z-7210-D
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: Curly Koa
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Expedition | Eddie Bauer, EL Eddie Bauer | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Shifter Part Number: 9L1Z-7210-E
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: Wales Mahogany
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Expedition | EL King Ranch, King Ranch | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Shifter Part Number: AL1Z-7210-CB
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Manufacturer Note: Wales Mahogany
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Expedition | EL King Ranch, King Ranch | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Shifter Part Number: AL1Z-7210-FA
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Expedition | EL Limited, Limited | 8 Cyl 5.4 L FLEX

| Page 1 of 2 |Next >

1-20 of 31 Results

Ford Expedition Automatic Transmission Shifter

OEM Automatic Transmission Shifter boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Automatic Transmission Shifter with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Automatic Transmission Shifter of Ford Expedition plays a vital role to improve driving efficiency through simple operation between park, reverse, neutral and drive transmission modes. Positioned on the center console the Ford Expedition Automatic Transmission Shifter delivers both reliability and performance for user-friendly operation while providing drivers with effective transmission setting control. Throughout different Expedition generations the vehicle has benefited from state-of-the-art development with electronic shift-by-wire technology that replaces traditional mechanical connections and introduces new control elements such as buttons and rotary shifters. Through continuous development Ford demonstrates its dedication to implementing modern technological solutions within the Expedition family. Since its original launch in 1997 the Ford Expedition has ruled the full-size SUV field through years of continued existence and durability which draws loyal consumers from households and outdoor enthusiasts. The Automatic Transmission Shifter emerges as a vital system because it improves vehicle efficiency alongside safety while enabling controlled shifts that create increased driving pleasure. The Ford Expedition Automatic Transmission Shifter stands out in the automotive market with its special feature offering the mechatronic TCM which adjusts to driver preference. This shifter demonstrates Ford's commitment to performance and reliability because it works with different model models while building the SUV's reputation as an elite vehicle.

Ford Expedition Automatic Transmission Shifter Parts and Q&A

Shifter
8L1Z-7210-A
Q: How to Service and Repair the Automatic Transmission Shifter Mechanism on Ford Expedition?
A:
The first step to repair the selector lever mechanism involves removing the instrument panel lower finish panel after which one must unscrew the steering column lower shroud. Services on the steering column upper shroud along with the instrument panel cluster-to-shroud trim need to be performed. The instrument panel cluster trim requires removal of screws from both right-hand and left-hand locations before extracting the trim from the panel. Remove the IP cluster trim first by disconnecting both the temperature sensor connector and dimmer switch electrical connector from their respective places. The first step includes unscrewing the upper IP cluster screws together with the right-hand and left-hand lower IP cluster screws for placing the IP cluster to the side. Drain the selector lever cable before removing the locking pin as well as park lock cable (PLC) and discard the locking pin when done. You must first disconnect the transmission control switch electrical connector along with its harness strap from its retaining clips before removing the selector lever bolt and the selector lever itself. The procedure requires users to disconnect the BSIA electrical connector after removing the selector lever mechanism lower bolt and securing the upper bolts before extractor the selector lever mechanism. Place the BSIA after pulling its override button while guiding the selector lever tab within the opening and fastening it using a screw and clip. After installing the BSIA to the selector lever mechanism you should mount the mechanism into the vehicle where you must apply 6 Nm (53 lb-in) torque when securing the upper bolts while connecting the BSIA electrical connector. Secure the selector lever mechanism lower bolt making sure it reaches 6 Nm (53 lb-in) torque specification. After that tighten the selector lever to achieve 18 Nm (13 lb-ft). Connect the PLC electrical chain to the retaining hooks after which the technician installs a fresh locking pin. Install the IP cluster with proper positioning then fasten first the left-hand and right-hand lower IP cluster screws before using the upper IP cluster screws. Reinstall the selector lever cable and position the IP cluster. Reinstall the IP cluster trim and join the dimmer switch electrical connection. In case of equipment presence, reconnect the in-vehicle temperature sensor connector. Accomplish the installation of the left-hand and right-hand IP cluster trim screws before putting the IP cluster-to-shroud trim and steering column upper shroud in place. Continue with the addition of the steering column lower shroud and instrument panel lower finish panel.