How to Service and Repair the In-Line Automatic Transmission Filter for the 4R70E/4R75E Without an OTA Cooler on Ford Expedition?

Proceeding with service or repair of the in-line filter for 4R70E/4R75E automatic transmissions absent an OTA cooler requires placing the vehicle in neutral and elevating it on a hoist. The installation of a new in-line fluid filter becomes necessary when servicing the transmission that originally contained this type of filter. The transmission requires an in-line fluid filtration system so obtain and install new filter elements if there is no existing filter in place. A filter or filter kit should not be installed when putting new transmissions that need no internal repairs. A new or Ford-authorized remanufactured transmission requires the installation of the filter provided by the manufacturer. Remove the retainers on cooler tubes and section of steel tube before cleaning and deburring the steel tubes' ends. Insert the cooler tube completely into the fitting before beginning ferrule nut tightening. The initial finger tension should be followed by 1.5 additional turns. Install the filter into the fluid cooler return line with its red arrow facing away from the transmission fluid cooler in the direction of the transmission. The filter contains a bypass valve. It is vital to prevent the installation of rubber hoses and steel tubing with bends exceeding 60 degrees when they lead into the filter. The filter installation requires suitable hose length while hose clamps need to be properly tightened. You should install one cooler tube retainer before you secure the cooler tubes with a tie strap. The transmission fluid pan requires cleaning before placing the sticker onto its designated section. You must proceed with filling the transmission with new automatic transmission fluid before checking that the system works correctly and looking for any filter leakage.

OEM Ford Expedition Automatic Transmission Filter

AT Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Automatic Transmission Filters found

View related parts
Ford Expedition Filter Part Number: YC3Z-7A098-BA
$34.01 MSRP: $54.00
You Save: $19.99 (38%)
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Automatic Transmission Case Fluid Passage Screen; Transmission Oil Filter; Transmission Filter; Screen
- Replaces: F6TZ-7A098-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Filter Kit Part Number: YC3Z-7A098-AA
$33.55 MSRP: $53.27
You Save: $19.72 (38%)
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Automatic Transmission Case Fluid Passage Screen; Transmission Oil Filter; Transmission Filter; Filter; Screen
- Replaces: F6TZ-7A098-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Filter Part Number: F6AZ-7A098-A
$40.76 MSRP: $64.73
You Save: $23.97 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Filter Assembly; Transmission Oil Filter; Transmission Filter; Screen
- Replaces: F4TZ-7A098-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Screen Part Number: BL3Z-7A098-A
$36.87 MSRP: $58.55
You Save: $21.68 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter; Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Filter Part Number: 7L1Z-7A098-A
$48.55 MSRP: $77.09
You Save: $28.54 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter; Screen
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Filter Part Number: 6L2Z-7A098-AA
$38.01 MSRP: $60.36
You Save: $22.35 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter; Screen
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL Limited, EL XLT, Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Filter Part Number: HL3Z-7A098-A
$71.68 MSRP: $113.82
You Save: $42.14 (38%)
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter; Transmission Filter Kit; Hydraulic Filter; Screen
- Replaces: FT-215, L1MZ-7A098-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS

Ford Expedition Automatic Transmission Filter

OEM Automatic Transmission Filter boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Automatic Transmission Filter with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Automatic transmission filter is a must-have feature in Ford Expedition cars that help keep the overall health of the transmission in check by extraction of dirt and impurities from it. This filter helps to maintain clean fluid one of which is critical for lubrication, cooling and hydraulic function of the transmission. Many types of automatic transmission filters have been used in Ford Expeditions over time, including filters that are permanently installed internally behind the transmission fluid pan which are normally in access ways during annual service. It is also possible to come across models with more complicated filter configurations that entail quite a lot of disassembly to replace them. Also, there are external spin-on or cartridge-type filters for some applications, which provide better access to change filter more frequently. Performance transmission filters are also available and these units provide higher degree of filtration as well as better flow characteristics than the standard filter which in turn enhances the transmission efficiency and reliability.

Ford Expedition Automatic Transmission Filter Parts and Q&A

Filter
F6AZ-7A098-A
Q: How to Service and Repair the In-Line Automatic Transmission Filter for the 4R70E/4R75E Without an OTA Cooler on Ford Expedition?
A:
Proceeding with service or repair of the in-line filter for 4R70E/4R75E automatic transmissions absent an OTA cooler requires placing the vehicle in neutral and elevating it on a hoist. The installation of a new in-line fluid filter becomes necessary when servicing the transmission that originally contained this type of filter. The transmission requires an in-line fluid filtration system so obtain and install new filter elements if there is no existing filter in place. A filter or filter kit should not be installed when putting new transmissions that need no internal repairs. A new or Ford-authorized remanufactured transmission requires the installation of the filter provided by the manufacturer. Remove the retainers on cooler tubes and section of steel tube before cleaning and deburring the steel tubes' ends. Insert the cooler tube completely into the fitting before beginning ferrule nut tightening. The initial finger tension should be followed by 1.5 additional turns. Install the filter into the fluid cooler return line with its red arrow facing away from the transmission fluid cooler in the direction of the transmission. The filter contains a bypass valve. It is vital to prevent the installation of rubber hoses and steel tubing with bends exceeding 60 degrees when they lead into the filter. The filter installation requires suitable hose length while hose clamps need to be properly tightened. You should install one cooler tube retainer before you secure the cooler tubes with a tie strap. The transmission fluid pan requires cleaning before placing the sticker onto its designated section. You must proceed with filling the transmission with new automatic transmission fluid before checking that the system works correctly and looking for any filter leakage.