FordParts
My Garage
My Account
Cart
Powertrain Control
2008 Ford Expedition Camshaft Position Sensor, Crankshaft Position Sensor, MAP Sensor, Engine Control Module
Currently shopping for
2008 Ford Expedition
Change VehicleVehicle Options
8 Cyl 5.4 L GASVehicle Options
8 Cyl 5.4 L GASCategories Close X
Currently selected
Air & Fuel Delivery
Other Categories
A/C & Heating
Belts & Cooling
Body & Hardware
Brakes
Charging & Starting
Driveline & Axles
Electrical
Emission Control & Exhaust
Engine
Headlights & Lighting
Interior & Exterior Trim
Maintenance & Lubrication
Steering
Suspension
Transmission
Categories Close X
How to use OE catalog
Diagram (1 of 1): Engine - Air Intake
Sort by:
Ref No.
Ref No.
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
Part Description
- 1
MSRP: $356.53 Your Price: $242.801
- 2
MSRP: $7.00 Your Price: $4.941
- 3
MSRP: $8.45 Your Price: $5.961
- 5
MSRP: $190.00 Your Price: $130.531
- 6
MSRP: $30.80 Your Price: $19.90
- 7
MSRP: $18.33 Your Price: $12.711
- 8
MSRP: $227.27 Your Price: $138.131
- 9
MSRP: $49.64 Your Price: $31.261
MSRP: $117.27 Your Price: $69.851
MSRP: $66.55 Your Price: $41.911
MSRP: $36.50 Your Price: $25.731
- MSRP: $1108.33 Your Price: $748.131
- MSRP: $915.00 Your Price: $617.631
MSRP: $88.27 Your Price: $52.681
MSRP: $94.73 Your Price: $57.571
MSRP: $143.09 Your Price: $86.961
-W500224-S426
Screw- Part Notes: M8 X 25MM
- Fit Note: 8 Cyl 5.4L
- Production Date: 03/2002-08/2014
- Callout Name: HS1
MSRP: $3.25 Your Price: $1.92
-W500632-S439
Bolt- Part Notes: M10 X 20MM
- Fit Note: 8 Cyl 5.4L
- Production Date: 08/2006-06/2017
- Callout Name: HB1
MSRP: $4.00 Your Price: $2.35
-W520823-S426
Nut - Adjusting Screw- Part Notes: M8 X 1.25
- Fit Note: 8 Cyl 5.4L
- Production Date: 03/2002-06/2017
- Callout Name: HN2
- Replaced By: -W520823-S439
MSRP: $4.00 Your Price: $2.35
OEM 2008 Ford Expedition Parts for Powertrain Control
Genuine OEM 2008 Ford Expedition parts are made using the original design, the high standards, in the Ford official factories, and all of these ensure that they always fit perfectly and easily. FordPartsDeal.com is a trusted source for finding these authentic OEM Powertrain Control parts at very competitive prices. Our professional team is here to help you choose the right 2008 Ford Expedition Camshaft Position Sensor, Crankshaft Position Sensor, MAP Sensor, Engine Control Module, and our fast delivery options ensure that your parts are always delivered quickly.
Camshaft Position Sensor, Crankshaft Position Sensor, Engine Control Module Installation and Repair Tips for 2008 Ford Expedition
- Q: How to Service the Crankshaft Position Sensor on 2008 Ford Expedition?A: In order to maintain the CKP sensor, make sure that the car is in a neutral position on a hoist. Take off the accessory drive belt, disconnect the A/C compressor and take off its bolts. Disassemble the CKP sensor, mount it with 10 Nm torque, lubricate the O-ring and fit the A/C compressor again tightening its bolts to 25 Nm.
- Q: How to Service the LH Camshaft Position Sensor on 2008 Ford Expedition?A: In order to service the left hand camshaft position (CMP) sensor, disconnect the electrical connector, remove the securing bolt, and remove the air cleaner outlet pipe. Install the new sensor, fix the bolt up to 10 Nm (89 lb-in) and lubricate the O-ring with clean engine oil. Turn the process in reverse to install.
- Q: How to remove and replace the Engine Control Module on 2008 Ford Expedition?A: To replace the Engine Control Module, get the module configuration, disconnect battery and PCM connector and remove PCM. To reinstall, reverse the process, assemble the bolts to 7 Nm. Once the airbag warning light is installed, it will be lit until PCM configuration has been restored and DTCs clear.