How to Remove and Replace the Front Drive Shaft on Ford Expedition?

You should begin the front driveshaft replacement process by positioning the vehicle in neutral gear while using a hoist. Index-mark the front flange to the pinion flange and the rear flange to the transfer case flange. The replacement process requires discarding six bolts and three washers that join the transfer case flange and rear flange while you should tighten these bolts to 55 Nm (41 lb-ft) during installation. Tighten the six front flange to pinion flange bolts with 55 Nm (41 lb-ft) torque after installation and discard these bolts together with the two washers. The technician should discard 4 stabilizer bracket nuts and let the stabilizer bar drop down before re-tightening them to 55 Nm (41 lb-ft). Take the front driveshaft out of the vehicle after which you should perform the installation procedure in reverse order.

What Precautions Should Be Taken Before Removing and Installing the Rear Drive Shaft on Ford Expedition?

Start the rear driveshaft installation and removal only when you turn off the air suspension switch found in the rear jack storage area because unexpected air spring alterations from electrical power could shift the vehicle during operations which poses risk of personal injury. Place the vehicle in neutral gear and raise its supported position for drive shaft indexing at all necessary points including the flange yoke, pinion flange and driveshaft, extension housing. The four bolts must be removed one by one while taking precautionary measures that avoid using hammers on the driveshaft and its components to extract the yoke from the flange. A suitable removable tool should be used at the designated space instead. Pull down the driveshaft before removing it from the output while applying an extension housing plug to block fluid leakage. The driveshaft installation requires new bolts or users must apply Threadlock and Sealer EOAZ-19554-AA or equivalent material per Ford specification WSK-M2G351-A5 to existing bolt threads. The driveshaft flange yoke needs to be perfectly aligned to the pinion flange pilot while you tighten the bolts using a cross-pattern approach. The installation process ends with backward execution of removal steps.

OEM Ford Expedition Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

38 Drive Shafts found

View related parts
Ford Expedition Drive Shaft, Front Part Number: AL3Z-4A376-D
$556.15 MSRP: $753.85
You Save: $197.70 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Front; Driveshaft
- Position: Front
- Replaces: 7L1Z-4A376-B, AL3Z-4A376-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Drive Axle, Front Passenger Side Part Number: 3L3Z-3219-AA
$111.66 MSRP: $154.46
You Save: $42.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Drive Axle Shaft, Front Right; Axle Shaft; Axle Shafts; Axle Assembly
- Position: Front Passenger Side
- Replaces: F65Z-3219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: JL1Z-4R602-Q
$752.63 MSRP: $1029.23
You Save: $276.60 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive
- Replaces: JL1Z-4R602-K, JL1Z-4R602-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2023 Ford Expedition | Max Limited, Max Platinum, Max SSV, Max XL, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: JL1Z-4R602-R
$800.66 MSRP: $1094.92
You Save: $294.26 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive
- Replaces: JL1Z-4R602-A, JL1Z-4R602-N, JL1Z-4R602-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: JL1Z-4R602-L
$741.38 MSRP: $1013.85
You Save: $272.47 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive
- Replaced by: JL1Z-4R602-U
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2023 Ford Expedition | Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: JL1Z-4R602-S
$822.94 MSRP: $1125.38
You Save: $302.44 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive
- Replaces: JL1Z-4R602-P, JL1Z-4R602-G, JL1Z-4R602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft, Front Part Number: ML3Z-4A376-H
$624.38 MSRP: $853.85
You Save: $229.47 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Front; Driveshaft
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft, Rear Part Number: JL1Z-4602-L
$614.25 MSRP: $840.00
You Save: $225.75 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear
- Position: Rear
- Replaces: JL1Z-4602-J, JL1Z-4602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft, Rear Part Number: JL1Z-4602-P
$585.00 MSRP: $800.00
You Save: $215.00 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: JL1Z-4602-K, JL1Z-4602-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft, Rear Part Number: DL1Z-4602-D
$648.45 MSRP: $886.77
You Save: $238.32 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: DL1Z-4602-B, 7L1Z-4602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Expedition | EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: JL1Z-4602-N
$613.80 MSRP: $839.38
You Save: $225.58 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: JL1Z-4602-C, JL1Z-4602-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft, Front Part Number: JL3Z-4A376-A
$679.50 MSRP: $929.23
You Save: $249.73 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Front; Driveshaft
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft, Rear Part Number: JL1Z-4602-M
$639.00 MSRP: $873.85
You Save: $234.85 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear
- Position: Rear
- Replaces: JL1Z-4602-G, JL1Z-4602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: 7L1Z-4R602-A
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Drive Shaft, Rear Part Number: 2L1Z-4602-ED
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Expedition | Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: 3L1Z-4602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: 3L1Z-4602-BA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: 4L7Z-4602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: F65Z-4A376-BA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Drive Shaft Part Number: F75Z-4602-VA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS

| Page 1 of 2 |Next >

1-20 of 38 Results

Ford Expedition Drive Shaft

OEM Drive Shaft boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Drive Shaft with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Drive Shaft in Ford Expedition cars is used for the critical purpose of transferring the mechanical power and torque from the engine or transmission to the drive wheels with efficiency for the movement of the vehicle. This component must take up torsional and shearing loads and will be as light as possible so as not to contribute much to inertia. Ford Expeditions come equipped with one-piece, two-piece and slip-in-tube drive shafts with the latest slip-in-tube providing improved crash safety systems. In the four-wheel and all-wheel drive, there are several Drive Shafts used and the transfer cases are used to split the power between the frontal and the rear axle. This synthetic integrates these driveshafts, so the expedition can handle power delivery depending on various driving scenarios without straying from performance and steadiness.

Ford Expedition Drive Shaft Parts and Q&A

Drive Shaft, Front
AL3Z-4A376-D
Q: How to Remove and Replace the Front Drive Shaft on Ford Expedition?
A:
You should begin the front driveshaft replacement process by positioning the vehicle in neutral gear while using a hoist. Index-mark the front flange to the pinion flange and the rear flange to the transfer case flange. The replacement process requires discarding six bolts and three washers that join the transfer case flange and rear flange while you should tighten these bolts to 55 Nm (41 lb-ft) during installation. Tighten the six front flange to pinion flange bolts with 55 Nm (41 lb-ft) torque after installation and discard these bolts together with the two washers. The technician should discard 4 stabilizer bracket nuts and let the stabilizer bar drop down before re-tightening them to 55 Nm (41 lb-ft). Take the front driveshaft out of the vehicle after which you should perform the installation procedure in reverse order.
Drive Shaft
5L3Z-4A376-A
Q: What Precautions Should Be Taken Before Removing and Installing the Rear Drive Shaft on Ford Expedition?
A:
Start the rear driveshaft installation and removal only when you turn off the Air Suspension switch found in the rear jack storage area because unexpected air spring alterations from electrical power could shift the vehicle during operations which poses risk of personal injury. Place the vehicle in neutral gear and raise its supported position for drive shaft indexing at all necessary points including the flange yoke, pinion flange and driveshaft, extension housing. The four bolts must be removed one by one while taking precautionary measures that avoid using hammers on the driveshaft and its components to extract the yoke from the flange. A suitable removable tool should be used at the designated space instead. Pull down the driveshaft before removing it from the output while applying an extension housing plug to block fluid leakage. The driveshaft installation requires new bolts or users must apply Threadlock and Sealer EOAZ-19554-AA or equivalent material per Ford specification WSK-M2G351-A5 to existing bolt threads. The driveshaft flange yoke needs to be perfectly aligned to the pinion flange pilot while you tighten the bolts using a cross-pattern approach. The installation process ends with backward execution of removal steps.