How to service and repair the starter motor on Ford Expedition?

Start procedures for starter motor maintenance should be initiated by placing the vehicle in NEUTRAL position on a hoist. First disconnect the battery ground cable then remove the starter terminal cover followed by unfastening S terminal electrical connection on the solenoid before reassembly. Normal torque to 6 Nm (53 lb-in) must be applied to this component. So you must disassemble the nut and solenoid B terminal electrical connection and tighten it to 12 Nm (9 lb-ft) while mounting it. The starter battery ground cable must have its securing nut removed from the stud at a torque level of 20 Nm (15 lb-ft) while reinstalling. SAE J2534 states that installation of the starter motor requires a torque of 25 Nm (18 lb-ft) on both bolts and stud bolt. The installation should be finished by tightening the starter fasteners by hand initially and then proceeding to the upper and lower fastener tightening before completion. After maintenance you must install protective caps since they protect you from injuries.

OEM Ford Expedition Starter

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Starters found

View related parts
Ford Expedition Starter
Part Number: F81Z-11V002-AARM
$149.29 MSRP: $240.00
You Save: $90.71 (38%)
ADD TO CART
Product Specifications
- Other Name: Remanufactured Starter Motor Assembly; Starter Motor; Starter Motor Assembly
- Replaces: 5R3Z-11002-A, 6L3Z-11002-AA, 9L3Z-11002-ABRM, SA-956, SA-1033, 6C3Z-11002-BA, 5L3Z-11002-A, 7L1Z-11002-A, 6L3Z-11002-CA, 9L3Z-11002-A, 6R3Z-11002-A, 9L3Z-11002-AARM, F81Z-11002-AARM, SA-961, SA-974, SA-966, SA-940
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, XL, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Starter
Part Number: F7UZ-11002-AARM
$139.44 MSRP: $229.09
You Save: $89.65 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Remanufactured Starter Motor Assembly; Starter Motor; Starter Motor Reman; Starter Motor New; Starters; Starter Motor Assembly
- Replaces: F75Z-11002-AA, F7UZ-11V002-AARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Starter
Part Number: DL3Z-11002-A
$139.97 MSRP: $229.09
You Save: $89.12 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor; Starter Motor Reman; Reman Starter; Starters
- Replaces: SA-932, SA-933, SA-988, XC3Z-11002-AB, XC3Z-11002-ABRM, 6C2Z-11002-BA, 9C2Z-11002-A, 6W1Z-11002-AA, 6C2Z-11002-CA, SA-894, SA-952
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Expedition | EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Starter
Part Number: CK4Z-11002-C
$172.01 MSRP: $281.82
You Save: $109.81 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor
- Replaces: CK4Z-11002-B, SA-1046
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Starter
Part Number: ML3Z-11002-B
$247.03 MSRP: $394.55
You Save: $147.52 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter Motor Assembly; Starter Motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Starter
Part Number: JL1Z-11002-B
$296.66 MSRP: $474.55
You Save: $177.89 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter Motor Assembly; Starter Motor
- Replaces: JL1Z-11002-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS

Ford Expedition Starter

Welcome to our website where you can discover high-quality, genuine Ford Expedition Starter. We offer an extensive inventory of OEM Ford Expedition Starter at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Expedition Starter Parts Questions & Experts Answers

Starter
F81Z-11V002-AARM
Q: How to service and repair the starter motor on Ford Expedition?
A: Start procedures for starter motor maintenance should be initiated by placing the vehicle in NEUTRAL position on a hoist. First disconnect the battery ground cable then remove the starter terminal cover followed by unfastening S terminal electrical connection on the solenoid before reassembly. Normal torque to 6 Nm (53 lb-in) must be applied to this component. So you must disassemble the nut and solenoid B terminal electrical connection and tighten it to 12 Nm (9 lb-ft) while mounting it. The starter battery ground cable must have its securing nut removed from the stud at a torque level of 20 Nm (15 lb-ft) while reinstalling. SAE J2534 states that installation of the starter motor requires a torque of 25 Nm (18 lb-ft) on both bolts and stud bolt. The installation should be finished by tightening the starter fasteners by hand initially and then proceeding to the upper and lower fastener tightening before completion. After maintenance you must install protective caps since they protect you from injuries.