How to Safely Remove and Install Car Battery on Ford Explorer?

The battery servicing process begins with battery cable disconnection and removal of the battery heat shield before removing the battery. The service requires complete removal of both bolt and battery hold-down clamp. A battery carrier or gripping opposite corners will help prevent end wall damage when lifting the battery since this prevents acid venting from vent caps that could result in injuries. People should reinstall the battery in the reverse order of removal steps. The driver must note that after disconnecting and reconnecting the battery the vehicle will experience abnormal drive behavior while it learns its adaptive strategy through driving to complete the relearning process.

How Can One Service the 4.0L SOHC Car Battery to Avoid Personal Injury or Damage on Ford Explorer?

Caution must be exercised during service of 4.0L SOHC battery due to the risk that applying too much force on the plastic casing end walls will result in vent cap acid leakage that can cause injury along with damage. Begin by disconnecting the battery. Follow the specified order of component removal along with supporting the vehicle to access the protective cap covering the starter solenoid terminals. Complete the removals work then lower the vehicle before moving on to the harness locator. First access the battery junction box nut through its open cover after relocating the protective cover of the Generator B+ terminal. The installation procedure requires the opposite steps from removal.

OEM Ford Explorer Car Battery

Auto Battery

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Car Batterys found

View related parts
Ford Explorer Battery Part Number: BXT-94RH7-730
$183.53 MSRP: $199.95
You Save: $16.42 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Replaces: BXT-94-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2024 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery Part Number: BXT-65-750
$183.53 MSRP: $199.95
You Save: $16.42 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Replaces: BH-65-HH, BXL-65
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2019 Ford Explorer | Base, DX, Eddie Bauer, Elite, Limited, Mercury Luxury, Mercury Premier, Mountaineer Version, Platinum, Police, Sport, XLS, XLT | 2.0L L4, 2.3L L4, 3.5L V6, 3.7L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4.0L V6, 4.6L V8, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Battery Part Number: BXT-65-650
$183.53 MSRP: $199.95
You Save: $16.42 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-2019 Ford Explorer | Base, Eddie Bauer, Expedition, Limited, NBX, Platinum, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Explorer Battery Part Number: BXT-59
$183.53 MSRP: $199.95
You Save: $16.42 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Replaces: BXL-59
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, DX, Limited, Platinum, Police, Sport, XLT | 2.0L L4, 2.3L L4, 3.5L V6, 3.7L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Battery, Driver Side Part Number: BXT-65-850
$192.69 MSRP: $209.95
You Save: $17.26 (9%)
Product Specifications
- Other Name: Vehicle Battery, Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Battery, Front Part Number: BAGM-94RH7-800
$211.01 MSRP: $229.95
You Save: $18.94 (9%)
Product Specifications
- Other Name: Vehicle Battery, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2025 Ford Explorer | Active, Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery Part Number: BAGM-48H6-760
$211.01 MSRP: $229.95
You Save: $18.94 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Replaces: BAGM-48-760, BHEF-48H6, BEF-48H6, BEF-48H6-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2025 Ford Explorer | Active, Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery Part Number: BXS-65
Product Specifications
- Other Name: Vehicle Battery
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2010 Ford Explorer | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Battery, Rear Part Number: BHAGM-AUX1-A
$117.94 MSRP: $128.75
You Save: $10.81 (9%)
Product Specifications
- Other Name: Vehicle Battery, Rear
- Position: Rear
- Replaces: BHAGM-AUX-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Limited Hybrid, Platinum Hybrid | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery Part Number: BAGM-49H8
$261.39 MSRP: $284.95
You Save: $23.56 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2025 Ford Explorer | Active, Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery Assembly Part Number: L1MZ-10B690-D
$3120.75 MSRP: $3263.53
You Save: $142.78 (5%)
Product Specifications
- Other Name: Battery; Drive Motor Battery Pack Assembly
- Replaces: L1MZ-10B690-A, L1MZ-10B759-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)

Ford Explorer Car Battery

OEM Car Battery boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Car Battery with long life and a perfect fit. Come to our website and find genuine Ford Explorer parts. We keep a wide inventory of OEM Explorer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Explorer Car Battery stores and supplies electrical energy to start the engine, initiate ignition and fuel injection parts and continue to supply other parts like the radio station, clock and so on when the engine is turned off. This Car Battery is 12-volt lead-acid with six electrochemical cells, the positive plates are composed of lead dioxide, and the negative plates are composed of sponge lead, which are immersed in a water and sulfuric acid electrolyte. In many Ford Explorer models the Car Battery could be a standard flooded lead-acid battery which needs water periodically or a maintenance-free flooded battery, or an Absorbent Glass Mat battery which imprisons the electrolyte in fiberglass mats to reduce spillage. Choosing a Car Battery with ratings that meet the car requirements is also significant since Cold Cranking Amps, the number of amps needed to start the car in 30 seconds at 0°F, whereas reserve capacity is how long a fully charged battery will provide 25 amps of current at 80°F before the voltage drops. In a very cold environment, high CCA would be beneficial to owners of Fords, and a big reserve would allow a lot of use of electrical equipment in an Explorer. This Car Battery also levels voltage spikes and supplements the charge system any time electrical load is more than the alternator output in a Ford Explorer.

Ford Explorer Car Battery Parts and Q&A

Battery
BXT-65-650
Q: How to Safely Remove and Install Car Battery on Ford Explorer?
A:
The battery servicing process begins with Battery Cable disconnection and removal of the battery heat shield before removing the battery. The service requires complete removal of both bolt and battery hold-down clamp. A battery carrier or gripping opposite corners will help prevent end wall damage when lifting the battery since this prevents acid venting from vent caps that could result in injuries. People should reinstall the battery in the reverse order of removal steps. The driver must note that after disconnecting and reconnecting the battery the vehicle will experience abnormal drive behavior while it learns its adaptive strategy through driving to complete the relearning process.
Battery
BXS-65
Q: How Can One Service the 4.0L SOHC Car Battery to Avoid Personal Injury or Damage on Ford Explorer?
A:
Caution must be exercised during service of 4.0L SOHC battery due to the risk that applying too much force on the plastic casing end walls will result in vent cap acid leakage that can cause injury along with damage. Begin by disconnecting the battery. Follow the specified order of component removal along with supporting the vehicle to access the protective cap covering the starter solenoid terminals. Complete the removals work then lower the vehicle before moving on to the harness locator. First access the battery junction box nut through its open cover after relocating the protective cover of the Generator B+ terminal. The installation procedure requires the opposite steps from removal.