How to Service and Repair the Cigarette Lighter Outlet on Ford Explorer Sport Trac?

In order to fix the cigarette lighter, first disconnect the battery ground cable. Next, loosen the cigarette lighter receptacle and panel and put them aside. Unscrew electrical connector and take off receptacle off panel. In order to put in place a new receptacle, just invert these steps.

How to Service and Repair a Cigarette Lighter Auxiliary Power Outlet on Ford Explorer Sport Trac?

In order to change the auxiliary cigarette lighter, unscrew its cover (where it is situated). Take a Cigarette Lighter Socket Remover and fit it into one slot socket and then push the other slot and then pull the socket out of the socket retainer and disconnect the electrical connector. Connect the connector again and push the socket back in.

OEM Ford Explorer Sport Trac Cigarette Lighter

Car Cigarette Lighter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Cigarette Lighters found

View related parts
Ford Explorer Sport Trac Lighter Assembly Part Number: F7SZ-15052-AA
$12.29 MSRP: $17.43
You Save: $5.14 (30%)
ADD TO CART
Product Specifications
- Other Name: Knob And Element - Cigar Lighter; Cigarette Lighter Element; Lighter; Cigarette Lighter
- Replaces: E8UZ-15052-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Socket, Passenger Side Part Number: 7A2Z-19N236-A
$40.78 MSRP: $58.33
You Save: $17.55 (31%)
ADD TO CART
Product Specifications
- Other Name: Socket Assembly - Additional
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Socket Part Number: F7CZ-15055-AA
Product Specifications
- Other Name: Socket Assembly; 12 Volt Accessory Power Outlet
- Manufacturer Note: Located in IP center finish panel
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Power Outlet, Rear Part Number: F4TZ-19N236-A
$10.58 MSRP: $15.00
You Save: $4.42 (30%)
Product Specifications
- Other Name: Socket Assembly - Additional; 12 Volt Accessory Power Outlet, Rear; Outlet Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS

Ford Explorer Sport Trac Cigarette Lighter

Welcome to our website where you can discover high-quality, genuine Ford Explorer Sport Trac Cigarette Lighter. We offer an extensive inventory of OEM Ford Explorer Sport Trac Cigarette Lighter at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Explorer Sport Trac Cigarette Lighter Parts and Q&A

Lighter Assembly
F7SZ-15052-AA
Q: How to Service and Repair the Cigarette Lighter Outlet on Ford Explorer Sport Trac?
A: In order to fix the cigarette lighter, first disconnect the battery ground cable. Next, loosen the cigarette lighter receptacle and panel and put them aside. Unscrew electrical connector and take off receptacle off panel. In order to put in place a new receptacle, just invert these steps.
Socket, Passenger Side
7A2Z-19N236-A
Q: How to Service and Repair a Cigarette Lighter Auxiliary Power Outlet on Ford Explorer Sport Trac?
A: In order to change the auxiliary cigarette lighter, unscrew its cover (where it is situated). Take a Cigarette Lighter Socket Remover and fit it into one slot socket and then push the other slot and then pull the socket out of the socket retainer and disconnect the electrical connector. Connect the connector again and push the socket back in.