How to Service and Repair the Vapor Canister on Ford Explorer?

Begin the repair and servicing procedure of the evaporative emission control canister by opening the liftgate and then lowering and removing the spare tire. The battery ground cable should be disconnected to prevent electrical sparks from starting the fuel vapors present in the area thus decreasing the risk of fires or explosions. The two chassis emission lines need disconnection from the evaporative emission tube. First remove all bolts from the evaporative emissions canister before extracting it together with its bracket assembly. The technician should first disconnect the canister vent solenoid electrical connector followed by removing the solenoid by disconnecting its hose before continuing to remove the evaporative emission canister purge sleeve and evaporative emission tube. The evaporative emission canister should be separated from its bracket in the last step of the procedure. After reversing all removal steps create a leak test for the evaporative emissions system before installation. A driver must finish the process by executing the evaporative emission repair verification drive cycle. All O-ring seals need to receive MERPOL(R) O-ring Seal Lubricant or an equivalent fluid that meets Ford specification ESE-M99B144-B.

OEM Ford Explorer Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Vapor Canisters found

View related parts
Ford Explorer Vapor Canister
Part Number: AG1Z-9D653-D
$152.49 MSRP: $250.91
You Save: $98.42 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Bracket; Vapor Canister Purge Solenoid
- Replaces: 8G1Z-9D653-K, AG1Z-9D653-B, CX-2343, CX-2363, CX-2512, CX-2492, AG1Z-9D653-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Vapor Canister
Part Number: 7L2Z-9D653-B
$246.38 MSRP: $409.09
You Save: $162.71 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Replaces: 6L2Z-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Vapor Canister
Part Number: L1MZ-9D653-F
$274.67 MSRP: $440.00
You Save: $165.33 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid
- Replaces: CX-2645, L1MZ-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Limited Hybrid | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Vapor Canister
Part Number: F65Z-9D653-AA
$85.64 MSRP: $140.91
You Save: $55.27 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2003 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Vapor Canister
Part Number: L1MZ-9D653-E
$451.35 MSRP: $772.00
You Save: $320.65 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid
- Replaces: CX-2653, L1MZ-9D653-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Platinum, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Explorer Vapor Canister
Part Number: F5OZ-9D653-AA
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2001 Ford Explorer | Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Vapor Canister
Part Number: E2ZZ-9D653-A
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid; Air Control Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1993 Ford Explorer | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Vapor Canister
Part Number: F57Z9E857A
Product Specifications
- Other Name: Canister & Bracket Assembly Fuel Vapor; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Explorer | Eddie Bauer, Expedition, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Vapor Canister
Part Number: F37Z-9D653-A
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Explorer | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Vapor Canister
Part Number: 4L2Z-9D653-BA
Product Specifications
- Other Name: Reservoir Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Explorer | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

Ford Explorer Vapor Canister

Welcome to our website where you can discover high-quality, genuine Ford Explorer Vapor Canister. We offer an extensive inventory of OEM Ford Explorer Vapor Canister at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Explorer Vapor Canister Parts Questions & Experts Answers

Vapor Canister
F5OZ-9D653-AA
Q: How to Service and Repair the Vapor Canister on Ford Explorer?
A: Begin the repair and servicing procedure of the evaporative emission control canister by opening the liftgate and then lowering and removing the spare tire. The battery ground cable should be disconnected to prevent electrical sparks from starting the fuel vapors present in the area thus decreasing the risk of fires or explosions. The two chassis emission lines need disconnection from the evaporative emission tube. First remove all bolts from the evaporative emissions canister before extracting it together with its bracket assembly. The technician should first disconnect the canister vent solenoid electrical connector followed by removing the solenoid by disconnecting its hose before continuing to remove the evaporative emission canister purge sleeve and evaporative emission tube. The evaporative emission canister should be separated from its bracket in the last step of the procedure. After reversing all removal steps create a leak test for the evaporative emissions system before installation. A driver must finish the process by executing the evaporative emission repair verification drive cycle. All O-ring seals need to receive MERPOL(R) O-ring Seal Lubricant or an equivalent fluid that meets Ford specification ESE-M99B144-B.