Other Name: Motor Assembly - Wiper; Windshield Wiper Motor; Front Motor; Motor
Manufacturer Note: Motor And Crank Arm
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2008-2010 Ford Explorer | Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
Ford Explorer Wiper Motor
OEM Wiper Motor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Wiper Motor with long life and a perfect fit. Come to our website and find genuine Ford Explorer parts. We keep a wide inventory of OEM Explorer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.
The Wiper Motor of automobiles particularly Ford Explorer is employed for the simple purpose of turning the wipers on to wipe of the water such as rain, snow and other obstructions for better sight. This electric motor works at different speeds which provides drivers with an ability to change the wipers speed depending with the weather. Ford Explorer Wiper Motors can be bought either new or refurnished. New Wiper Motors are those purchased direct from the manufacturing company while remanufactured Wiper Motors are those that were used before being reconstructed applicable to the current standards. This range also makes sure that individuals with Ford Explorer get the optimal model required by them and at the same time have the wiper system as it is supposed to be.
Q: How to service the windshield wiper motor on Ford Explorer?
A:
The first step to service the windshield wiper motor includes removal of front wiper pivot arms then cowl grille panels starting with right-hand and left-hand sides. The electrical connector and wiring harness from the wiper motor must be detached before you can unfasten and set aside the wiper arm accessory. Tighten the three bolts which hold the windshield wiper assembly to 15 Nm (11 lb-ft) torque when reinstalling the parts. Post the windshield wiper assembly removal from the vehicle carefully install it on a workbench. When reattaching the wiper motor remove its mounting arm bolt and the wiper motor mounting arm by tightening everything to 15 Nm (11 lb-ft). The installation requires you to remove the three mounting bolts of the windshield wiper motor and to tighten them to 15 Nm (11 lb-ft) during installation steps. For installing the windshield wiper motor take out the device and follow the reversal of removal procedures.