How to remove and install the front bumper cover on all on Ford F-150?

Start any front bumper cover removal or installation process on all vehicles by detaching the headlamps and front bumper cover-to-front bumper bolts. Remove first the hood over-slam bumper bolts and the hood over-slam bumpers from the vehicle. Remove the previously installed bolts on the front bumper cover brace followed by disassembling the front bumper cover braces. The next procedure requires removal of the front bumper cover-to-front fender bolts before separating the front bumper cover pin-type retainers. The installation of wheelhouse lip mouldings requires removal of four retaining nuts as well as both fender splash shield pin-type retainers and four fender splash shield screws before placing the wheelhouse lip mouldings to one side and disconnecting each of the six wheelhouse lip moulding clips. The procedure ends when you remove the retaining clips along with the bumper cover bolts positioned at the headlamp openings. The installation procedure follows the steps of removing installation.

How to service and repair the front bumper cover on Ford F-150?

The first step of servicing and repairing the front bumper cover requires removing the headlamps from early and late Mark LT vehicles alongside all F150 vehicles. The next step involves removing the front bumper cover-to-front bumper bolts after which you should detach the hood over-slam bumper bolts and hood over-slam bumpers. Both the front bumper cover brace bolts and front bumper cover braces need to be taken out according to the sequence. The next step requires the removal of the front bumper cover-to-front fender bolts alongside the front bumper cover pin-type retainers. The installation process of wheelhouse lip mouldings requires disconnecting four retaining nuts in addition to fender splash shield pin-type retainers and four fender splash shield screws before placing them carefully to the side. You will disconnect six clips that hold the wheelhouse lip moulding before releasing all retaining clips. All vehicles require removal of the bumper cover bolts which are positioned near the headlamp opening before removing the front bumper cover. The installation of the new cover must follow the steps used for removal in reverse order.

OEM Ford F-150 Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Bumper Covers found

View related parts
Ford F-150 Bumper Cover, Front Part Number: 4L3Z-17D957-CA
$149.29 MSRP: $217.30
You Save: $68.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford F-150 | FX4, King Ranch, Lariat, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper Cover, Front Part Number: 6L3Z-17D957-BAPTM
$343.35 MSRP: $504.18
You Save: $160.83 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper Cover, Front Part Number: 6L3Z-17D957-AAPTM
$176.52 MSRP: $272.40
You Save: $95.88 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper Cover, Black, Front Part Number: 6L3Z-17D957-CAA
$229.29 MSRP: $336.70
You Save: $107.41 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper Cover, Front Part Number: 4L3Z-17D957-DA
$248.73 MSRP: $271.54
You Save: $22.81 (9%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford F-150 | FX4, King Ranch, Lariat, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper Cover, Front Part Number: 1L3Z-17D957-BB
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Replaces: 1L3Z-17D957-BA, XL3Z-17D957-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford F-150 | Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 4.2L V6, 4.6L V8, 5.4L V8, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper Cover, Black, Front Part Number: 5L3Z-17D957-AAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Manufacturer Note: Carbon Black
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford F-150 | FX4, King Ranch, Lariat, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

Ford F-150 Bumper Cover

OEM Bumper Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper Cover with long life and a perfect fit. Come to our website and find genuine Ford F-150 parts. We keep a wide inventory of OEM F-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford F-150 Bumper Cover is referred to as a soft outer panel that conceals the genuine bumper of the truck while giving the vehicle a complete look. The F-150 Bumper Cover is located at the front and at the rear. It absorbs the energy of a collision. It can also reduce the shock transmitted to the structure. By smoothing out outer surfaces, the Bumper Cover could allow airflow to travel more cleanly around the Ford body, contributing to modest aerodynamic gains that support speed and fuel economy. The integrated openings facilitate air entry to the radiator or other coolers that may be fitted on the Ford platform. Furthermore, the cavity shapes are designed for fog lights, parking lamps, lights, and removable tow-eye hook. Besides, decorative inserts provide a solution to varying premium segments and fill up cavity shapes that are not applied, preventing any ingress of debris while maintaining the stylishness. The flexibility of this Bumper Cover allows one basic bumper assembly to satisfy many different equipment levels of the F-150, providing production standardisation. If the Bumper Cover of your Ford pickup is cracked or scuffed, simply swapping in a new replacement will restore its protective function and visual appeal. Direct fit replacement are sized precisely for F-150 to ensure it continues to fit with factory lines and use exact attachment points.

Ford F-150 Bumper Cover Parts and Q&A

Bumper Cover, Front
4L3Z-17D957-CA
Q: How to remove and install the front bumper cover on all on Ford F-150?
A:
Start any front bumper cover removal or installation process on all vehicles by detaching the headlamps and front bumper cover-to-front bumper bolts. Remove first the hood over-slam bumper bolts and the hood over-slam bumpers from the vehicle. Remove the previously installed bolts on the front bumper cover brace followed by disassembling the front bumper cover braces. The next procedure requires removal of the front bumper cover-to-front fender bolts before separating the front bumper cover pin-type retainers. The installation of wheelhouse lip mouldings requires removal of four retaining nuts as well as both fender splash shield pin-type retainers and four fender splash shield screws before placing the wheelhouse lip mouldings to one side and disconnecting each of the six wheelhouse lip moulding clips. The procedure ends when you remove the retaining clips along with the bumper cover bolts positioned at the headlamp openings. The installation procedure follows the steps of removing installation.
Bumper Cover, Front
6L3Z-17D957-BAPTM
Q: How to service and repair the front bumper cover on Ford F-150?
A:
The first step of servicing and repairing the front bumper cover requires removing the headlamps from early and late Mark LT vehicles alongside all F150 vehicles. The next step involves removing the front bumper cover-to-front bumper bolts after which you should detach the hood over-slam bumper bolts and hood over-slam bumpers. Both the front bumper cover brace bolts and front bumper cover braces need to be taken out according to the sequence. The next step requires the removal of the front bumper cover-to-front fender bolts alongside the front bumper cover pin-type retainers. The installation process of wheelhouse lip mouldings requires disconnecting four retaining nuts in addition to fender splash shield pin-type retainers and four fender splash shield screws before placing them carefully to the side. You will disconnect six clips that hold the wheelhouse lip moulding before releasing all retaining clips. All vehicles require removal of the bumper cover bolts which are positioned near the headlamp opening before removing the front bumper cover. The installation of the new cover must follow the steps used for removal in reverse order.