How to remove and replace the front bumper cover on Ford F-150?

The first step for removing and installing the front bumper cover involves headlights removal. The reinstallation process requires new bolts to replace the ones connecting the front bumper cover with the front bumper. The first set of steps includes removing hood over-slam bumper bolts as well as bumper bolts before moving onto front bumper cover brace bolts and braces. You should remove both the front bumper cover-to-front fender bolts and the pin-type retainers from the system. Vehicle owners should extract retaining nuts from four locations while also unfastening the four fender splash shield screws then disconnect six clips before removing pin-type retainers along with four retaining nuts and four fender splash shield screws to isolate wheelhouse lip mouldings. The installation process ends by removing the bumper cover bolts present at the headlamp openings followed by disconnecting the front bumper cover. Reinstallation of the new cover requires following the same steps backwards.

How to service and repair the front bumper cover on Ford F-150?

The first step of servicing and repairing the front bumper cover requires removing the headlamps from early and late Mark LT vehicles alongside all F150 vehicles. The next step involves removing the front bumper cover-to-front bumper bolts after which you should detach the hood over-slam bumper bolts and hood over-slam bumpers. Both the front bumper cover brace bolts and front bumper cover braces need to be taken out according to the sequence. The next step requires the removal of the front bumper cover-to-front fender bolts alongside the front bumper cover pin-type retainers. The installation process of wheelhouse lip mouldings requires disconnecting four retaining nuts in addition to fender splash shield pin-type retainers and four fender splash shield screws before placing them carefully to the side. You will disconnect six clips that hold the wheelhouse lip moulding before releasing all retaining clips. All vehicles require removal of the bumper cover bolts which are positioned near the headlamp opening before removing the front bumper cover. The installation of the new cover must follow the steps used for removal in reverse order.

OEM Ford F-150 Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

87 Bumpers found

View related parts
Ford F-150 Bumper, Rear Part Number: 4L3Z-17906-MA
$442.37 MSRP: $649.58
You Save: $207.21 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Manufacturer Note: Chrome
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2009 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Impact Bar, Front Part Number: YL3Z-17757-CAA
$290.34 MSRP: $362.07
You Save: $71.73 (20%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front; Bumper
- Position: Front
- Replaces: XL3Z-17757-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford F-150 | Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Lower Deflector, Front Part Number: ML3Z-17626-AA
$131.54 MSRP: $191.47
You Save: $59.93 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Bumper, Black, Rear Part Number: ML3Z-17906-AAPTM
$550.05 MSRP: $873.10
You Save: $323.05 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | Police Responder, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Lower Cover, Front Part Number: JL3Z-17626-BC
$96.40 MSRP: $140.32
You Save: $43.92 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Panel; Bumper Trim, Front Lower
- Manufacturer Note: BLACK
- Position: Front Lower
- Replaces: JL3Z-17626-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2020 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Bumper, Front Part Number: FL3Z-17757-HPTM
$540.99 MSRP: $794.40
You Save: $253.41 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford F-150 | King Ranch, Lariat, Limited, Platinum, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Bumper, Rear Part Number: FL3Z-17906-DPTM
$1139.37 MSRP: $1350.36
You Save: $210.99 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2020 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Bumper, Rear Part Number: 4L3Z-17906-NA
$556.64 MSRP: $853.63
You Save: $296.99 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Manufacturer Note: Chrome
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2009 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper, Rear Part Number: 4L3Z-17906-JA
$634.65 MSRP: $940.22
You Save: $305.57 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2009 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper Cover, Black, Front Part Number: 6L3Z-17D957-CAA
$229.29 MSRP: $336.70
You Save: $107.41 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper, Front Part Number: AL3Z-17757-BPTM
$776.64 MSRP: $1232.77
You Save: $456.13 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2014 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Ford F-150 Bumper, Black, Front Part Number: ML3Z-17757-FAPTM
$579.00 MSRP: $857.78
You Save: $278.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Bumper, Front Part Number: ML3Z-17757-BPTM
$561.97 MSRP: $832.55
You Save: $270.58 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Bumper, Rear Part Number: 8L3Z-17906-DPTM
$534.94 MSRP: $785.52
You Save: $250.58 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: 5L3Z-17906-DAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper, Rear Part Number: 8L3Z-17906-B
$650.72 MSRP: $964.03
You Save: $313.31 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: 5L3Z-17906-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Bumper, Front Part Number: ML3Z-17757-CPTM
$579.62 MSRP: $858.70
You Save: $279.08 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Bumper, Rear Part Number: ML3Z-17906-PAPTM
$493.29 MSRP: $724.37
You Save: $231.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Bumper Bar - Side; Bumper Face Bar, Rear
- Position: Rear
- Replaces: NL3Z-17810-ZA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | Raptor, Raptor R | 6 Cyl 3.5 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford F-150 Bumper, Front Part Number: ML3Z-17757-D
$800.27 MSRP: $1185.58
You Save: $385.31 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Front Bumper Part Number: ML3Z-17757-H
$1731.29 MSRP: $2564.87
You Save: $833.58 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Replaced by: ML3Z-17757-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | Raptor, Raptor R | 6 Cyl 3.5 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford F-150 Bumper, Rear Part Number: 4L3Z-17906-KA
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2009 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

| Page 1 of 5 |Next >

1-20 of 87 Results

Ford F-150 Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Ford F-150 parts. We keep a wide inventory of OEM F-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford F-150 Bumper Parts and Q&A

Bumper Cover, Front
6L3Z-17D957-BAPTM
Q: How to remove and replace the front bumper cover on Ford F-150?
A:
The first step for removing and installing the front bumper cover involves headlights removal. The reinstallation process requires new bolts to replace the ones connecting the front bumper cover with the front bumper. The first set of steps includes removing hood over-slam bumper bolts as well as bumper bolts before moving onto front bumper cover brace bolts and braces. You should remove both the front bumper cover-to-front fender bolts and the pin-type retainers from the system. Vehicle owners should extract retaining nuts from four locations while also unfastening the four fender splash shield screws then disconnect six clips before removing pin-type retainers along with four retaining nuts and four fender splash shield screws to isolate wheelhouse lip mouldings. The installation process ends by removing the bumper cover bolts present at the headlamp openings followed by disconnecting the front bumper cover. Reinstallation of the new cover requires following the same steps backwards.
Bumper, Front
6L3Z-17757-AA
Q: How to service and repair the front bumper cover on Ford F-150?
A:
The first step of servicing and repairing the front bumper cover requires removing the headlamps from early and late Mark LT vehicles alongside all F150 vehicles. The next step involves removing the front bumper cover-to-front bumper bolts after which you should detach the hood over-slam bumper bolts and hood over-slam bumpers. Both the front bumper cover brace bolts and front bumper cover braces need to be taken out according to the sequence. The next step requires the removal of the front bumper cover-to-front fender bolts alongside the front bumper cover pin-type retainers. The installation process of wheelhouse lip mouldings requires disconnecting four retaining nuts in addition to fender splash shield pin-type retainers and four fender splash shield screws before placing them carefully to the side. You will disconnect six clips that hold the wheelhouse lip moulding before releasing all retaining clips. All vehicles require removal of the bumper cover bolts which are positioned near the headlamp opening before removing the front bumper cover. The installation of the new cover must follow the steps used for removal in reverse order.