Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2005-2014 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
Other Name: Cross Member Assembly - Rear Seat; Floor Pan Crossmember, Rear
Position: Rear
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2015-2023 Ford F-150 | XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2001-2003 Ford F-150 | Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
Ford F-150 Rear Crossmember
Welcome to our website where you can discover high-quality, genuine Ford F-150 Rear Crossmember. We offer an extensive inventory of OEM Ford F-150 Rear Crossmember at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to Service the Rear Crossmember on Ford F-150?
A: In order to service the rear cross-member, elevate the vehicle and unscrew the two exhaust hanger bolts (tighten to 40 Nm), then the two heat shield bolts (20 Nm). Support the transmission, and then remove the support nuts (103 Nm), crossmember bolts (90 Nm). Undo it by going in reverse.
Q: How to service the Front Cross-Member and Rear Crossmember of the transmission support on Ford F-150?
A: In order to service the transmission support crossmember make sure the vehicle is in neutral position on a hoist. Take off the exhaust hanger bolts and heat shield screws, and then hold the transmission. Take out the transmission support nuts and crossmember bolts and replace them with those of certain torque values. Lastly, undo the uninstalling process and install again.