How to remove air from the Hydro-Boost power brake booster on Ford F-250 Super Duty?

The Hydro-Boost power brake booster features built-in bleeding abilities through which the following procedure removes air from the power brake booster until normal vehicle operation completes the process. You should start by adding multi-purpose transmission fluid into the power steering oil reservoir. First unplug the powertrain control module (PCM) fuse to avoid engine startup. Afterward crank the engine for many seconds while maintaining a stop on the fuel petcock. Make a fluid check in the power steering oil reservoir following which add more fluid when needed before you reinstall the PCM fuse. Open the engine then perform two manual steering wheel movements by turning it from complete stops before engine shutdown. Apply the brake pedal several times to empty the accumulator before starting the previous operations again. You must stop the engine operation when foam develops then wait for the foam to disappear naturally. The operational procedure must be repeated multiple times to clear all air from the system as observed by the absence of foaming.

How to service the vacuum brake booster on Ford F-250 Super Duty?

Service of a vacuum brake booster begins by taking off the brake master cylinder first. The service on the vacuum brake booster begins with brake booster vacuum hose separation from the check valve. I will remove the power distribution auxiliary relay box from service when it applies and place it safely aside. Use a tool to remove the brake pedal cotter pin cover with attached pin from the pedal shaft as you position first the BPP switch then push rod on the pin. Unscrew and remove the four nuts securing the brake booster-to-pedal bracket but spare no more than 25 Nm (18 ft lbs) torque when installing these nuts again. Conclude the process by removing the brake booster before installing the new one through the reverse steps of removal.

OEM Ford F-250 Super Duty Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Brake Boosters found

View related parts
Ford F-250 Super Duty Brake Booster Part Number: 5C7Z-2005-B
$305.32 MSRP: $489.09
You Save: $183.77 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster Assembly
- Replaces: 2C3Z-2005-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Brake Booster Part Number: DC3Z-2005-E
$261.71 MSRP: $434.55
You Save: $172.84 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster
- Replaces: DC3Z-2005-B, BRB-95, BRB-134, BRB-148, DC3Z-2005-D, DC3Z-2005-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Brake Booster Part Number: BC3Z-2005-A
$259.92 MSRP: $416.36
You Save: $156.44 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford F-250 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Brake Booster Part Number: 7C3Z-2005-AA
$191.63 MSRP: $318.18
You Save: $126.55 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster
- Replaces: 6C3Z-2005-AA, 5C3Z-2005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-250 Super Duty Brake Booster Part Number: EC3Z-2005-C
$140.34 MSRP: $230.91
You Save: $90.57 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster
- Replaces: BRB-83, BRB-104, DC3Z-2005-A, EC3Z-2005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Brake Booster Part Number: PC3Z-2005-C
$259.69 MSRP: $416.00
You Save: $156.31 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Booster
- Replaced by: PC3Z-2005-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Brake Booster Part Number: PC3Z-2005-A
$309.86 MSRP: $496.36
You Save: $186.50 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Booster
- Replaces: BRB-151, HC3Z-2005-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Brake Booster Part Number: HC3Z-2005-H
$234.95 MSRP: $376.36
You Save: $141.41 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster
- Replaces: BRB-255, HC3Z-2005-G, HC3Z-2005-B, BRB-150, HC3Z-2005-F, HC3Z-2005-J, BRB-222
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Brake Booster Part Number: HC3Z-2005-E
$214.62 MSRP: $356.36
You Save: $141.74 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster
- Replaces: BRB-149, HC3Z-2005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Brake Booster Part Number: BC3Z-2005-C
$244.19 MSRP: $405.45
You Save: $161.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster
- Replaces: BC3Z-2005-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford F-250 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Brake Booster Part Number: 8C3Z-2005-B
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster
- Replaces: 6C3Z-2005-AB, 8C3Z-2005-A, 5C3Z-2005-AC, BRB-16
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford F-250 Super Duty Brake Booster Part Number: 5L3Z-2005-BA
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster Assembly
- Replaces: XL3Z-2005-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Brake Booster Part Number: 5C7Z-2005-A
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster Assembly
- Replaces: F81Z-2005-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

Ford F-250 Super Duty Brake Booster

OEM Brake Booster boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Booster with long life and a perfect fit. Come to our website and find genuine Ford F-250 Super Duty parts. We keep a wide inventory of OEM F-250 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford F-250 Super Duty Brake Booster is an important part that contributes to the stiffness of bringing the car to a stop and guarantees safety. Generally considered a performance part, the Brake Booster simply lessens the amount of work the driver has to do by making the brakes more responsive. This is done through 9th generation vacuum operated hydraulic boosters and hydraulic operated boosters that are flexible enough to accommodate different types of brakes; disk and drum. The Brake Booster fits multiple models because the Ford F-250 Super Duty is available in Regular Cab, Super Cab, and Crew Cab layouts. Its design has changed over a long time and now come in various forms such as having one or two diaphragms for different clients with various performance needs. Besides, Ford F-250 Super Duty Brake Booster improves the product's performance and is crucial for safety, as it delivers the additional boost to provide a powerful brake pedal and firm and secure stopping power and authoritative stopping power especially when carrying heavy loads. Others include, increasing features such as enhanced corrosion protection in the more recent models which place it in even a better position in the car market. This Ford F-250 Super Duty Brake Booster offers the optimal of both worlds, stability and performance, which are the hallmarks of a great brake booster that Responds to the need of today's heavy-duty trucking industry. But to do so it requires the Brake Booster and the present model is quite sufficient to be applied for Ford F-250 Super Duty to meet work and mass needs.

Ford F-250 Super Duty Brake Booster Parts and Q&A

Brake Booster
8C3Z-2005-B
Q: How to remove air from the Hydro-Boost power brake booster on Ford F-250 Super Duty?
A:
The Hydro-Boost power brake booster features built-in bleeding abilities through which the following procedure removes air from the power brake booster until normal vehicle operation completes the process. You should start by adding multi-purpose transmission fluid into the power steering oil reservoir. First unplug the powertrain control module (PCM) fuse to avoid engine startup. Afterward crank the engine for many seconds while maintaining a stop on the fuel petcock. Make a fluid check in the power steering oil reservoir following which add more fluid when needed before you reinstall the PCM fuse. Open the engine then perform two manual steering wheel movements by turning it from complete stops before engine shutdown. Apply the brake pedal several times to empty the accumulator before starting the previous operations again. You must stop the engine operation when foam develops then wait for the foam to disappear naturally. The operational procedure must be repeated multiple times to clear all air from the system as observed by the absence of foaming.
Brake Booster
7C3Z-2005-AA
Q: How to service the vacuum brake booster on Ford F-250 Super Duty?
A:
Service of a vacuum brake booster begins by taking off the Brake Master Cylinder first. The service on the vacuum brake booster begins with brake booster vacuum hose separation from the check valve. I will remove the power distribution auxiliary relay box from service when it applies and place it safely aside. Use a tool to remove the brake pedal cotter pin cover with attached pin from the pedal shaft as you position first the BPP switch then push rod on the pin. Unscrew and remove the four nuts securing the brake booster-to-pedal bracket but spare no more than 25 Nm (18 ft lbs) torque when installing these nuts again. Conclude the process by removing the brake booster before installing the new one through the reverse steps of removal.