Other Name: Control Unit; Fuel Pump Driver Module; Fuel Pump Controller; Controller
Replaces: LC3Z-9D370-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2020-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
Ford F-250 Super Duty Fuel Pump Driver Module
Welcome to our website where you can discover high-quality, genuine Ford F-250 Super Duty Fuel Pump Driver Module. We offer an extensive inventory of OEM Ford F-250 Super Duty Fuel Pump Driver Module at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford F-250 Super Duty Fuel Pump Driver Module Parts Questions & Experts Answers
Q: How to access and replace the Fuel Pump Driver Module (FPDM) on Ford F-250 Super Duty?
A: The Fuel Pump Driver Module (FPDM) finds its position on the left-hand side of the vehicle behind the rear wheel. Owners must first unlock the spare tire storage if secured with a lock. The storage key can then be accessed in the glove compartment. Direct the jack handle drive end with spare tire carrier key towards the space next to the license plate to get access to the Fuel Pump Driver Module. The vehicle must rest on a hoist at neutral position before disconnecting the electrical connector and removing the two nuts from the Fuel Pump Driver Module. Install new nuts while tightening to 10 Nm (89 lb-in). The installation process ends by removing the Fuel Pump Driver Module and installing a new unit through the opposite removal steps.