The service and repair process for the windshield washer pump and reservoir starts by taking out the battery tray followed by moving the windshield washer fluid reservoir to the side. Begin by first removing bolts which secure the reservoir while disconnecting its electrical connector. The windshield washer solution contains harmful methanol so all safety guidelines on the solution container must be followed strictly. After disconnecting the windshield washer hose it is necessary to gather the fluid in a separate container before handling the rear window washer hose if present. Begin windshield washer pump removal only when the fluid reservoir is detached from the vehicle. Make sure to avoid electrical connections before adding fluid into the windshield
Washer Reservoir because it remains empty and the pump should stay inactive until the reservoir has sufficient liquid inside. Perform the installation by following the steps in reverse order of removal.