How to service the front Air Bag Sensor on Ford F-350 Super Duty?

The front impact severity sensor service requires starting with SRS depowering of the vehicle. Start the front impact severity sensor service by disconnecting its electrical connector that sits at the bottom of the lower radiator support. Both RCM fasteners and impact sensor fasteners need tight installation at specified torques to stop improper restraint operations that carry the risk of severe injury or death during car crashes. Clean both areas where the radiator support meets the sensor while noting the position of the locator tab for correct assembly. Disassemble the front impact severity sensor by removing its securing bolt followed by the sensor unit. The installation of the new sensor requires a bolt torque setting of 12 Nm (9 lb-ft) followed by the reverse steps for removal. The SRS repowering process should finish after checking that the system operates without faults and is ready to release the vehicle to the customer. The diagnostic process should begin again by reattaching the original part if replacing it with a new one does not resolve the problem. Inspect all mounting areas on the restraints control module (RCM) and impact sensors for deformation post-crash before reinstalling original configurations because brand new RCM and sensors will always be needed regardless of air bag deployment.

OEM Ford F-350 Super Duty Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Air Bag Sensors found

View related parts
Ford F-350 Super Duty Impact Sensor, Front Part Number: BL3Z-14B345-A
$38.89 MSRP: $55.63
You Save: $16.74 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Front, Front Right; Air Bag Sensor; Side Impact Sensor; Side Sensor
- Position: Front
- Replaces: 9L3Z-14B345-B, AL5Z-14B345-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Side Impact Sensor Part Number: BC3Z-14B345-B
$42.25 MSRP: $61.50
You Save: $19.25 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor
- Manufacturer Note: RH/LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Impact Sensor, Rear Part Number: 9L3Z-14B345-A
$43.95 MSRP: $63.97
You Save: $20.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Center Front, Center Rear, Front, Rear; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Impact Sensor, Front Part Number: 8C3Z-14B004-A
$46.13 MSRP: $72.00
You Save: $25.87 (36%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front, Rear; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-350 Super Duty Side Impact Sensor, Rear Part Number: HC3Z-14B004-A
$48.81 MSRP: $76.18
You Save: $27.37 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Front Impact Sensor, Rear Center Part Number: FR3Z-14B004-A
$60.80 MSRP: $96.55
You Save: $35.75 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Center Rear, Front, Rear; Air Bag Sensor; Front Sensor; Side Impact Sensor; Side Sensor
- Position: Rear Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Side Impact Sensor Part Number: BC3Z-14B345-A
$51.82 MSRP: $77.60
You Save: $25.78 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor
- Manufacturer Note: RH/LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Front Impact Sensor, Rear Part Number: L1TZ-14B004-A
$43.80 MSRP: $68.36
You Save: $24.56 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Center, Center Rear, Front, Rear; Air Bag Sensor; Front Sensor; Side Impact Sensor; Side Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Pressure Sensor, Center Part Number: ML3Z-14B345-A
$63.16 MSRP: $97.02
You Save: $33.86 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Center; Position Sensor; Side Impact Sensor; Side Sensor
- Position: Center
- Replaces: GN1Z-14B345-A, DG1Z-14B345-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS

Ford F-350 Super Duty Air Bag Sensor

OEM Air Bag Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Air Bag Sensor with long life and a perfect fit. Come to our website and find genuine Ford F-350 Super Duty parts. We keep a wide inventory of OEM F-350 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford F-350 Super Duty Air Bag Sensor is an important module that premier depicts the compromise of Safety and Reliability from the Ford brand's side. This Air Bag Sensor, or crash sensor, is significant in the detection of impacts and triggering the control unit to the inflation of the Airbags, thus improving occupant protection during crashes. Since it's inception in the 1999 model year, the Ford F-350 Super Duty has had several renditions which are incorporated with Air Bag Sensors to enhance the detection and reaction capacity. Here one has to point out the consistent quality of the F-350 Super Duty models of different years, which underlines the company's reliability. Since the Air Bag Sensor's role lies in having the capacity to ensure that the air bag is deployed when it ought to, it is an essential tool in avoiding injuries in an accident thus useful for any Ford F-350 Super Duty owner. Furthermore, the incorporation of this sensor also improves the efficiency of safety facilities of the truck such as antilock brake system and stability control system. First of all, it is important to note that automotive consumers can benefit when companies, such as the one in the following Ford F-350 Super Duty Air Bag Sensor product description, pay special attention to the sensor's accuracy and the models to which it is compatible so that drivers can depend on their vehicles during emergencies. Featuring the safety as well as performance enhancement aspects, the Ford F-350 Super Duty Air Bag Sensor is one of the brand's finest safety products offered to the consumers.

Ford F-350 Super Duty Air Bag Sensor Parts and Q&A

Impact Sensor, Front
8C3Z-14B004-A
Q: How to service the front Air Bag Sensor on Ford F-350 Super Duty?
A:
The front impact severity sensor service requires starting with SRS depowering of the vehicle. Start the front impact severity sensor service by disconnecting its electrical connector that sits at the bottom of the lower Radiator Support. Both RCM fasteners and impact sensor fasteners need tight installation at specified torques to stop improper restraint operations that carry the risk of severe injury or death during car crashes. Clean both areas where the radiator support meets the sensor while noting the position of the locator tab for correct assembly. Disassemble the front impact severity sensor by removing its securing bolt followed by the sensor unit. The installation of the new sensor requires a bolt torque setting of 12 Nm (9 lb-ft) followed by the reverse steps for removal. The SRS repowering process should finish after checking that the system operates without faults and is ready to release the vehicle to the customer. The diagnostic process should begin again by reattaching the original part if replacing it with a new one does not resolve the problem. Inspect all mounting areas on the restraints control module (RCM) and impact sensors for deformation post-crash before reinstalling original configurations because brand new RCM and sensors will always be needed regardless of air bag deployment.