How to service the front ABS sensor on Ford Five Hundred?

Before servicing the front ABS sensor, you need to put the vehicle in NEUTRAL position on a hoist. Start by disconnecting the electrical connector of the ABS sensor and afterward remove the 2 scrivets to put aside the fender splash shield. First disconnect the pin-type retainer from the ABS sensor harness and then remove the two retainers for the harness. The service of the ABS sensor requires removing its securing bolt followed by removing the sensor. Install the sensor with a torque of 8 Nm (71 inch lbs.) during installation. You should finish the installation by performing the reverse order of the removal steps.

OEM Ford Five Hundred ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 ABS Sensors found

View related parts
Ford Five Hundred ABS Sensor, Front Driver Side
Part Number: 8G1Z-2C204-A
$51.02 MSRP: $85.49
You Save: $34.47 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front, Front Left, Front Right; ABS Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: RH/LH
- Position: Front Driver Side
- Replaces: 7F9Z-2C204-A, 5F9Z-2C204-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred ABS Sensor, Rear Driver Side
Part Number: 7F9Z-2C216-B
$36.13 MSRP: $49.16
You Save: $13.03 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Driver Side
- Replaces: 5F9Z-2C190-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred ABS Sensor, Rear Driver Side
Part Number: 7F9Z-2C216-A
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left; Rear Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Driver Side
- Replaces: 5F9Z-2C190-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred ABS Sensor, Rear Passenger Side
Part Number: 7F9Z-2C190-B
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Replaces: 5F9Z-2C190-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred ABS Sensor, Rear Passenger Side
Part Number: 7F9Z-2C190-A
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Replaces: 5F9Z-2C190-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS

Ford Five Hundred ABS Sensor

Welcome to our website where you can discover high-quality, genuine Ford Five Hundred ABS Sensor. We offer an extensive inventory of OEM Ford Five Hundred ABS Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Five Hundred ABS Sensor Parts Questions & Experts Answers

ABS Sensor, Front Driver Side
8G1Z-2C204-A
Q: How to service the front ABS sensor on Ford Five Hundred?
A: Before servicing the front ABS sensor, you need to put the vehicle in NEUTRAL position on a hoist. Start by disconnecting the electrical connector of the ABS sensor and afterward remove the 2 scrivets to put aside the fender splash shield. First disconnect the pin-type retainer from the ABS sensor harness and then remove the two retainers for the harness. The service of the ABS sensor requires removing its securing bolt followed by removing the sensor. Install the sensor with a torque of 8 Nm (71 inch lbs.) during installation. You should finish the installation by performing the reverse order of the removal steps.