How to service and repair the anti-roll engine mount on Ford Five Hundred?

The first step for anti-roll engine mount maintenance requires unfastening the air cleaner outlet pipe before continuing. First remove the four bolts from the throttle body then set the throttle body to the side after tightening it to 10 Nm (89 inch lbs.) when reinstalling. Cleaan the roll restrictor cross brace-to-roll restrictor bolt using a wire brush after which you must apply new threadlocker before reinstalling it at 48 Nm (35 ft. lbs). Start by cleaning each of the four roll restrictor cross brace-to-strut tower bolts before applying new threadlocker and tightening them to 55 Nm (41 ft. lbs.) when reinstalling. Reinstallation of the roll restrictor support bracket requires cleaning of bolts before applying new threadlocker and torquing them to 55 Nm (41 ft. lbs.). The first step requires users to detach the wiring retainer from the roll restrictor followed by taking out a pair of bolts from the roll restrictor system. The installation of new threadlocker follows bolt cleaning before you tighten them to 55 Nm (41 ft. lbs.). The installation process ends through performing the reverse steps of removal.

OEM Ford Five Hundred Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mounts found

View related parts
Ford Five Hundred Restrictor, Rear Part Number: 5F9Z-6068-CA
$58.62 MSRP: $81.10
You Save: $22.48 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Torque Strut, Rear; Engine Mount Torque Strut
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Bracket Part Number: 5F9Z-6F055-CB
$101.10 MSRP: $147.17
You Save: $46.07 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Automatic Transmission Mount Bracket; Engine Mount Bracket; Motor Mount; Transmission Mount
- Replaces: 5F9Z-6F055-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Damper Part Number: 5F9Z-6F050-BA
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Strut; Engine Torque Strut; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Transmission Mount, Driver Side Part Number: 5F9Z-6068-A
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount, Left; Engine Mount Bracket; Transfer Case Mount.; Front Mount; Rear Mount
- Position: Driver Side
- Replaces: 5F9Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Front Mount, Passenger Side Part Number: 5F9Z-6038-BA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Motor Mount
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Restrictor, Front Part Number: 5F9Z-6F069-BA
Product Specifications
- Other Name: Engine Torque Strut, Front; Engine Mount Torque Strut
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Bracket Part Number: 5F9Z-6F055-BB
$111.41 MSRP: $162.17
You Save: $50.76 (32%)
Product Specifications
- Other Name: Automatic Transmission Mount Bracket; Engine Mount Bracket; Motor Mount; Transmission Mount
- Replaces: 5F9Z-6F055-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Restrictor, Front Part Number: 5F9Z-6F069-CA
Product Specifications
- Other Name: Engine Torque Strut, Front; Engine Mount Torque Strut
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Cross Bar Part Number: 5F9Z-6F054-AA
Product Specifications
- Other Name: Bracket; Engine Support Rod; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Damper Part Number: 5F9Z-6F050-AA
Product Specifications
- Other Name: Strut; Engine Torque Strut; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Restrictor, Rear Part Number: 5F9Z-6068-BB
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Torque Strut, Rear; Engine Mount Torque Strut
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS

Ford Five Hundred Engine Mount

OEM Engine Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Mount with long life and a perfect fit. Come to our website and find genuine Ford Five Hundred parts. We keep a wide inventory of OEM Five Hundred parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Five Hundred Engine Mounts are therefore very vital parts which define the reliability and performance of the series that was built from 2004 to 2007. This Engine Mount plays the function of sound absorption from the noise and vibrations from the engine while also closely holding the engine and the transaxle to the car's chassis. High-end features including fluid-Filled hydraulic mounts and electronic "active" mounts that increases its stiffness with the turning of the engine RPM, contribute both to efficiency and security of the Ford Five Hundred Engine Mount. As applied to various kinds of Ford Five Hundred models, it guarantees that the car's drivers get the maximum level of performance and speed, whether it is SE, SEL, or Limited. The tough kind of construction used in the Engine Mount is important to keep up the structure integrity of the vehicle, thus knocks such as sponginess and leaks that may develop over time as the parts wear out are discouraged. This component is another which requires regular check up in order to guarantee safety and efficient performance of the Ford Five Hundred. Ford automotive industry offers a great Ford Five Hundred Engine Mount that enhances ride quality and enhances reduction of vibration that buyers always consider when in the market for automotive models. Altogether, Engine Mount is essential for anyone who is determined to preserve the extraordinary driving quality that is characteristic of the Ford Five Hundred.

Ford Five Hundred Engine Mount Parts and Q&A

Restrictor, Front
5F9Z-6F069-BA
Q: How to service and repair the anti-roll engine mount on Ford Five Hundred?
A:
The first step for anti-roll engine mount maintenance requires unfastening the air cleaner outlet pipe before continuing. First remove the four bolts from the Throttle Body then set the throttle body to the side after tightening it to 10 Nm (89 inch lbs.) when reinstalling. Cleaan the roll restrictor cross brace-to-roll restrictor bolt using a wire brush after which you must apply new threadlocker before reinstalling it at 48 Nm (35 ft. lbs). Start by cleaning each of the four roll restrictor cross brace-to-strut tower bolts before applying new threadlocker and tightening them to 55 Nm (41 ft. lbs.) when reinstalling. Reinstallation of the roll restrictor support bracket requires cleaning of bolts before applying new threadlocker and torquing them to 55 Nm (41 ft. lbs.). The first step requires users to detach the wiring retainer from the roll restrictor followed by taking out a pair of bolts from the roll restrictor system. The installation of new threadlocker follows bolt cleaning before you tighten them to 55 Nm (41 ft. lbs.). The installation process ends through performing the reverse steps of removal.