How to service the ignition coil-on-plug on Ford Flex?

Start the ignition coil-on-plug service by removing the quick connect coupling of the crankcase vent tube from its position on the valve cover left-hand side. Customers must detach the upper intake manifold before reaching the right-hand ignition coil-on-plugs. The service of ignition coil-on-plug starts by removing the upper intake manifold before disconnecting its six electrical connectors. You should apply a minor twisting action to separate the ignition coil-on-plugs from its seat before taking them out. Complete the removal process by unbolting and extracting the six ignition coil-on-plugs together with their six bolts. During assembly workers must tighten installation bolts to a torque value of 7 Nm (62 lb-in). The coil seals require inspection for damage where rips, nicks or tears are present so discard all torn seals. Install each new coil seal by positioning it down the coil until it achieves full seat at the top. The finishing step requires both the return of removal steps and light application of dielectric grease to coil-on-plug boots before fastening them onto spark plugs.

OEM Ford Flex Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ignition Coils found

View related parts
Ford Flex Ignition Coil Part Number: 7T4Z-12029-F
$67.18 MSRP: $110.55
You Save: $43.37 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Ignition Coil, Brown Part Number: BL3Z-12029-C
$70.94 MSRP: $116.73
You Save: $45.79 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil
- Replaces: DG-548, BL3Z-12029-B, BL3Z-12029-A, DG-547
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Ignition Coil Part Number: AA5Z-12029-A
$81.77 MSRP: $137.27
You Save: $55.50 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Flex | Limited, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Ignition Coil Part Number: 7T4Z-12029-E
$64.64 MSRP: $106.36
You Save: $41.72 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Coil
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2016 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS

Ford Flex Ignition Coil

OEM Ignition Coil boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Ignition Coil with long life and a perfect fit. Come to our website and find genuine Ford Flex parts. We keep a wide inventory of OEM Flex parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Flex Ignition Coil is one of the most essential commodities that depict the reliability and performance of the Ford Flex model. This vital component regulates the battery 12 volts to an approximate range of 15 000 to 40 000 volts required to spark the air/fuel mixture in the engine cylinders. The Ford Flex Ignition Coil works with great precision with the help of a magnetic field that makes the changes in the engines impeccable. It is designed to fit different Ford Flex series; the basic SE type, medium-ranked SEL type, and the high-ranked limited type. The COP is an upgrade from the previous Coilege design improves efficiency as it uses one coil per cylinder thus no high tension leads are required and the probabilities of misfires are very minimal. This not only increases the power and performance but at the same time also makes the over all safety of the vehicle more sound by facilitating smooth operations. The Ignition Coil of the Ford Flex is made precisely to meet the demand of the vehicle to increase its lifespan and performance. Its differentiated presence in the automotive market is well enhanced due to the manufacturer's capability to retain the efficiency and performance of the Ford Flex's engine, which can well secure the interest of the buyers who would want to rely on dependable automobile. The Ford Flex Ignition Coil is an important part of the Flex and has the characteristic Ford design that reveals the manufacturer's dedication to the high quality of their products and great performance of the vehicles.

Ford Flex Ignition Coil Parts and Q&A

Ignition Coil
7T4Z-12029-E
Q: How to service the ignition coil-on-plug on Ford Flex?
A:
Start the ignition coil-on-plug service by removing the quick connect coupling of the crankcase vent tube from its position on the valve cover left-hand side. Customers must detach the upper intake manifold before reaching the right-hand ignition coil-on-plugs. The service of ignition coil-on-plug starts by removing the upper intake manifold before disconnecting its six electrical connectors. You should apply a minor twisting action to separate the ignition coil-on-plugs from its seat before taking them out. Complete the removal process by unbolting and extracting the six ignition coil-on-plugs together with their six bolts. During assembly workers must tighten installation bolts to a torque value of 7 Nm (62 lb-in). The coil seals require inspection for damage where rips, nicks or tears are present so discard all torn seals. Install each new coil seal by positioning it down the coil until it achieves full seat at the top. The finishing step requires both the return of removal steps and light application of dielectric grease to coil-on-plug boots before fastening them onto spark plugs.