How to service the front Seat Covers on Ford Flex?

The correct Restraints Control Module (RCM) fuse should be removed while keeping the ignition switch on ON to make the front seat cushion cover serviceable. The Supplemental Restraint System should show complete functionality with no faults before bringing back the vehicle to the customer. Start the procedure by disconnecting the front seat. To access the recliner cover of the driver seat begin by first removing the scrivet combined with the screw at its rear section followed by pulling out the recliner cover post from the seat track hole. First separate the inboard lower recliner cover of the passenger seat by unscrewing the screws attached to both back and sides before extracting the rear portion to release its retainers. To detach the manual lumbar handle from the shaft customers should first access the clip by pushing back the cushion trim cover and foam pad and then remove the handle by disconnecting the clip. To separate the cushion side shield start by removing screws positioned at the back, side and front sections before pushing it aside to free its clips. Free the pin-type retainer found on the cushion trim cover inboard side before splitting the rear J-clip. The passenger seat requires opening its rear seat retainers to separate the recliner cable as well as unfastening the remaining retainers from the cushion frame. The seat cushion trim cover needs six hog rings removed before removal but essential to install front hog rings through heater mat openings when reinstalling if heat functions are present. The sewing process ends with reversing all removed steps.

How to remove the Seat Covers for the RH third row seat backrest on Ford Flex?

The procedure to extract the right-hand third row seat backrest trim cover starts with removing the left-hand seat outboard pivot cover. The process starts with seat cover clip release using prying tools before unplugging the LH seat outboard pivot cover. After that, apply prying tools again to extract the RH seat outboard pivot cover. Push the head restraint guide button while lifting the head restraint and you can take out the restraint piece. First release the J-strip along the lower edge of the backrest trim cover then open the trim and detach the inside J-clips. Install the pivot bolt at 22 Nm (16 lb-ft) torque tightness. Flip up the backrest trim cover before taking out two rows of three hog rings while keeping track of the position of the head restraint guide with its release button on the left-hand side. Remove head restraint guides by depressing the two tabs on each guide and then pull off the backrest trim cover by tugging the strap. Installation of this component requires performing the removal steps in the reverse order.

OEM Ford Flex Seat Covers

Car Seat Protector Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

559 Seat Covers found

View related parts
Ford Flex Cushion Cover, Front Driver Side Part Number: DA8Z-7462901-DA
$307.60 MSRP: $451.68
You Save: $144.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (MQ)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Seat Back Cover, Center Passenger Side Part Number: DA8Z-7466600-BE
$318.75 MSRP: $440.95
You Save: $122.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Rear Seat Back; Seat Back Cushion Cover, Center Right
- Manufacturer Note: (MQ)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Black, Front Driver Side Part Number: AA8Z-7462901-AB
$112.14 MSRP: $152.60
You Save: $40.46 (27%)
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (CW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Black, Front Passenger Side Part Number: DA8Z-7462900-CB
$209.44 MSRP: $326.23
You Save: $116.79 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Right; Seat Cover, Front Right
- Manufacturer Note: (LW)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Seat Back Cover, Black, Front Driver Side Part Number: GA8Z-7464417-BA
$570.11 MSRP: $844.60
You Save: $274.49 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Manufacturer Note: (GW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Front Driver Side Part Number: BA8Z-7462901-AE
$127.46 MSRP: $185.53
You Save: $58.07 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (CS)
- Position: Driver Side
- Replaces: AA8Z-7462901-AC, BA8Z-7462901-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Flex | Base, Executive, Limited, SE, SEL, Titanium | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Ford Flex Seat Back Cover, Black, Rear Driver Side Part Number: BA8Z-7466601-AE
$131.09 MSRP: $190.82
You Save: $59.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Rear Seat Back; Seat Back Cushion Cover, Rear Left
- Manufacturer Note: (PW)
- Position: Driver Side
- Replaces: BA8Z-7466601-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Flex | Base, Executive, Limited, SE, SEL, Titanium | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Front Driver Side Part Number: DA8Z-7462901-CA
$222.24 MSRP: $326.35
You Save: $104.11 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (LQ)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Black, Front Driver Side Part Number: DA8Z-7462901-CB
$222.47 MSRP: $326.68
You Save: $104.21 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (LW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Front Driver Side Part Number: DA8Z-7462901-BA
$278.38 MSRP: $408.78
You Save: $130.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (MQ)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Black, Front Driver Side Part Number: DA8Z-7462901-BB
$278.46 MSRP: $408.90
You Save: $130.44 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (MW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Black, Front Driver Side Part Number: DA8Z-7462901-DB
$315.88 MSRP: $463.85
You Save: $147.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (MW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Seat Back Cover, Black, Center Driver Side Part Number: DA8Z-7466601-CD
$330.27 MSRP: $484.98
You Save: $154.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Rear Seat Back; Seat Back Cushion Cover, Center Left
- Manufacturer Note: (DW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Seat Back Cover, Black, Front Passenger Side Part Number: GA8Z-7464416-BA
$475.51 MSRP: $698.25
You Save: $222.74 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Manufacturer Note: (GW)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Front Driver Side Part Number: AA8Z-7462901-CA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (PS)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Rear Center Passenger Side Part Number: DA8Z-7463804-BA
Product Specifications
- Other Name: Cover Assembly - Rear Seat Cushion; Seat Cushion Cover, Center Right; Seat Cover, Center Right
- Manufacturer Note: (MQ)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Black, Front Driver Side Part Number: BA8Z-7462901-AD
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (GW)
- Position: Driver Side
- Replaces: BA8Z-7462901-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Flex | Base, Executive, Limited, SE, SEL, Titanium | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Black, Front Driver Side Part Number: AA8Z-7462901-CB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (PW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Cushion Cover, Black, Front Driver Side Part Number: AA8Z-7462901-BB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (LW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Seat Back Cover, Black, Rear Passenger Side Part Number: BA8Z-7466600-AE
Product Specifications
- Other Name: Cover Assembly - Rear Seat Back; Seat Back Cushion Cover, Rear Right
- Manufacturer Note: (PW)
- Position: Passenger Side
- Replaces: BA8Z-7466600-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Flex | Base, Executive, Limited, SE, SEL, Titanium | 3.5L V6, 6 Cyl 3.5 L GAS

| Page 1 of 28 |Next >

1-20 of 559 Results

Ford Flex Seat Covers

OEM Seat Covers boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Covers with long life and a perfect fit. Come to our website and find genuine Ford Flex parts. We keep a wide inventory of OEM Flex parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Fabric Seat Covers for Ford Flex act as a barrier that protects the original upholstery from spills, scratches, and wear. In addition, they let you refresh the styling of your interior. Offered individually, in matched pairs, or as complete sets, the Seat Covers fall within a flexible pricing range, thereby offering a wide variety for selection. Ford drivers can choose from a wide variety of shade combinations and materials when ordering their custom-fit Seat Covers. Available options include traditional fabric, fine leather or plush sheepskin. Wether chosen as original-style replacements or as performance upgrade options, the Seat Covers fit over the Flex's existing seats without permanently altering the seats, helping to maintain cabin appearance and value. These Seat Covers provide durable defence against stains and fading, ensuring all round cleanliness either during everyday use or whilst travelling with your family in your Ford crossover. Simultaneously, customization of textures gives a brand new look to any Flex cabin at minimal costs and downtime. Because the Seat Covers function as a skin rather than structure, they can be swapped or upgraded whenever owners wish. This makes the Ford interior adaptable as needs change while letting the Flex retain its upholstery underneath.

Ford Flex Seat Covers Parts and Q&A

Seat Back Cover, Front Driver Side
8A8Z-7464417-EB
Q: How to service the front Seat Covers on Ford Flex?
A:
The correct Restraints Control Module (RCM) fuse should be removed while keeping the ignition switch on ON to make the front seat cushion cover serviceable. The Supplemental Restraint System should show complete functionality with no faults before bringing back the vehicle to the customer. Start the procedure by disconnecting the front seat. To access the recliner cover of the driver seat begin by first removing the scrivet combined with the screw at its rear section followed by pulling out the recliner cover post from the seat track hole. First separate the inboard lower recliner cover of the passenger seat by unscrewing the screws attached to both back and sides before extracting the rear portion to release its retainers. To detach the manual lumbar handle from the shaft customers should first access the clip by pushing back the cushion trim cover and foam pad and then remove the handle by disconnecting the clip. To separate the cushion side shield start by removing screws positioned at the back, side and front sections before pushing it aside to free its clips. Free the pin-type retainer found on the cushion trim cover inboard side before splitting the rear J-clip. The passenger seat requires opening its rear seat retainers to separate the recliner cable as well as unfastening the remaining retainers from the cushion frame. The seat cushion trim cover needs six hog rings removed before removal but essential to install front hog rings through heater mat openings when reinstalling if heat functions are present. The sewing process ends with reversing all removed steps.
Cushion Cover, Front Passenger Side
8A8Z-7462900-AB
Q: How to remove the Seat Covers for the RH third row seat backrest on Ford Flex?
A:
The procedure to extract the right-hand third row seat backrest trim cover starts with removing the left-hand seat outboard pivot cover. The process starts with seat cover clip release using prying tools before unplugging the LH seat outboard pivot cover. After that, apply prying tools again to extract the RH seat outboard pivot cover. Push the head restraint guide button while lifting the head restraint and you can take out the restraint piece. First release the J-strip along the lower edge of the backrest trim cover then open the trim and detach the inside J-clips. Install the pivot bolt at 22 Nm (16 lb-ft) torque tightness. Flip up the backrest trim cover before taking out two rows of three hog rings while keeping track of the position of the head restraint guide with its release button on the left-hand side. Remove head restraint guides by depressing the two tabs on each guide and then pull off the backrest trim cover by tugging the strap. Installation of this component requires performing the removal steps in the reverse order.