How to Service and Repair the Front Sway Bar Link in the Suspension on Ford Flex?

The service and repair process for front suspension sway bar links requires a vehicle in NEUTRAL gear on a hoisting system. The physical removal of sway bar link nuts must not employ power tools because it could damage the ball joints or boots. The sway bar link nuts should be loosened first, then the hex-holding feature must be used to maintain ball joint stability while removing the sway bar link nuts. After discarding the sway bar link-to-strut nut, replace it with a new nut that requires tightening to 35 Nm (26 lb-ft). The next step involves removing the sway bar link-to-sway bar nut, followed by new nut installation at 125 Nm (92 lb-ft). You should repeat the usage of the hex-holding feature to prevent the ball joints from rotating as you torque down the sway bar link nuts. Finish by using a torque wrench to tighten the nuts through a socket, resulting in the complete installation by following the reverse of the removal process. Always choose new parts with the same part numbers or equivalent components and maintain proper retention by following specified torque standards.

OEM Ford Flex Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Sway Bar Links found

View related parts
Ford Flex Stabilizer Link, Rear Driver Side
Part Number: DG1Z-5K484-B
$55.98 MSRP: $90.31
You Save: $34.33 (39%)
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Rear Left Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear Driver Side
- Replaces: 8A8Z-5K484-D, AA8Z-5K484-B, MEF-115
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Stabilizer Link, Front Passenger Side
Part Number: GG1Z-5K484-A
$48.89 MSRP: $77.64
You Save: $28.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front Passenger Side
- Replaces: AA5Z-5K484-A, MEF-161
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Stabilizer Link, Front Driver Side
Part Number: GG1Z-5K483-A
$50.28 MSRP: $82.73
You Save: $32.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit
- Position: Front Driver Side
- Replaces: MEF-162
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Stabilizer Link, Front Passenger Side
Part Number: 8A8Z-5K484-A
$33.55 MSRP: $53.27
You Save: $19.72 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Stabilizer Link, Front Driver Side
Part Number: 8A8Z-5K483-A
$36.75 MSRP: $58.36
You Save: $21.61 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Stabilizer Link, Rear Passenger Side
Part Number: DG1Z-5K484-A
$55.25 MSRP: $90.91
You Save: $35.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Rear Right Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear Passenger Side
- Replaces: AA8Z-5K484-A, 8A8Z-5K484-C, MEF-114
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS

Ford Flex Sway Bar Link

Welcome to our website where you can discover high-quality, genuine Ford Flex Sway Bar Link. We offer an extensive inventory of OEM Ford Flex Sway Bar Link at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Flex Sway Bar Link Parts Questions & Experts Answers

Stabilizer Link, Front Driver Side
8A8Z-5K483-A
Q: How to Service and Repair the Front Sway Bar Link in the Suspension on Ford Flex?
A: The service and repair process for front suspension sway bar links requires a vehicle in NEUTRAL gear on a hoisting system. The physical removal of sway bar link nuts must not employ power tools because it could damage the ball joints or boots. The sway bar link nuts should be loosened first, then the hex-holding feature must be used to maintain ball joint stability while removing the sway bar link nuts. After discarding the sway bar link-to-strut nut, replace it with a new nut that requires tightening to 35 Nm (26 lb-ft). The next step involves removing the sway bar link-to-sway bar nut, followed by new nut installation at 125 Nm (92 lb-ft). You should repeat the usage of the hex-holding feature to prevent the ball joints from rotating as you torque down the sway bar link nuts. Finish by using a torque wrench to tighten the nuts through a socket, resulting in the complete installation by following the reverse of the removal process. Always choose new parts with the same part numbers or equivalent components and maintain proper retention by following specified torque standards.