How to remove and replace the front bumper cover on Ford Focus?

The procedure to change the front bumper cover starts with placing the vehicle in neutral gear while mounted on a hoist. Start removing the front bumper cover by taking out the 4 radiator grille pin-type retainers and the radiator grille and then the radiator lower air deflector. The first step involves taking out the fog lamp wiring harness pin-type retainer and the set of 6 fender splash shield pushpins then placing all elements apart. Both pin-type retainers on the upper bumper cover should be removed first although better visibility can be achieved by removing the headlamp to gain access to the pushpin retainers below the headlamps on the bumper cover mounting reinforcement bracket. Next you should remove the 4 nuts that secure the bumper cover mounting reinforcement bracket. Pry the rearward portion of the bumper cover ahead to unhinge it from the left- and right-hand fenders and perform removal by disassembling retaining brackets beginning at the wheel well. The installation of a new bumper cover follows the steps in reverse order to placement.

How to service the front bumper cover on Ford Focus?

Service of the front bumper cover usually starts by removing both the pin-type retainer and radiator air deflector. First disconnect the turn signal lamp electrical connectors when required. The radiator grille requires removal after extraction of its screws. The service begins with vehicle support before moving on to detach the radiator lower air deflector through the removal of 8 bolts and 5 pin-type retainers before leaving the air deflector set aside. It is essential to first take out the LH and RH fender splash shield bolts before continuing with the LH and RH bumper cover fender bolts removal. Unplug the electrical wiring connected to the side turn signal lamps and also disconnect the electrical wires for the available fog lamps in the system. The process starts with dropping the vehicle while you pull the pin-type retainers from the positions attached to the radiator grille opening panel. Complete the replacement by lowering the bumper cover before disconnecting it from the radiator splash shield. There are two ways to install the bumper cover which require performing all steps in reverse order of removal.

OEM Ford Focus Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Bumper Covers found

View related parts
Ford Focus Bumper Cover, Front Part Number: G1EZ-17757-AA
$247.85 MSRP: $363.95
You Save: $116.10 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Bumper Cover, Front Part Number: CM5Z-17D957-APTM
$320.46 MSRP: $470.57
You Save: $150.11 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric | BATTERY EV (EV/BEV)
View related parts
Ford Focus Bumper Cover, Front Part Number: CM5Z-17D957-BBPTM
$416.35 MSRP: $611.38
You Save: $195.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Focus | ST | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Bumper Cover, Rear Part Number: F1EZ-17906-MAPTM
$479.41 MSRP: $703.98
You Save: $224.57 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: F1EZ-17906-BAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | Electric, S, SE, SEL, ST, Titamium, Titanium | 1.0L L3, 2.0L L4, 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, EV
View related parts
Ford Focus Bumper Cover, Rear Part Number: G1EZ-17906-AA
$532.77 MSRP: $782.33
You Save: $249.56 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Bumper Cover, Front Part Number: BM5Z-17D957-CAPTM
$378.14 MSRP: $441.75
You Save: $63.61 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Focus | S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Bumper Cover, Rear Part Number: F1EZ-17906-LAPTM
$510.69 MSRP: $562.44
You Save: $51.75 (10%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: F1EZ-17906-DAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | Electric, S, SE, SEL, ST, Titamium, Titanium | 1.0L L3, 2.0L L4, 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, EV
View related parts
Ford Focus Bumper Cover, Rear Part Number: 8S4Z-17K835-ABPTM
$182.81 MSRP: $282.12
You Save: $99.31 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 8S4Z-17K835-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Bumper Cover, Rear Part Number: BM5Z-17K835-CBPTM
$222.06 MSRP: $345.88
You Save: $123.82 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Focus | Electric, SE, SEL, ST, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Bumper Cover, Rear Part Number: F1EZ-17906-FAPTM
$133.01 MSRP: $193.62
You Save: $60.61 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | Electric | BATTERY EV (EV/BEV)
View related parts
Ford Focus Bumper Cover, Front Part Number: 9S4Z-17D957-BAPTM
$144.98 MSRP: $211.03
You Save: $66.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford Focus | SE, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Bumper Cover, Rear Part Number: CP9Z-17K835-BAPTM
$388.09 MSRP: $427.41
You Save: $39.32 (10%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Focus | S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Bumper Cover, Front Part Number: F1EZ-17757-CAPTM
$484.05 MSRP: $569.20
You Save: $85.15 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | S, SE, SEL, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Bumper Cover, Front Part Number: F1EZ-17757-DAPTM
$670.78 MSRP: $806.00
You Save: $135.22 (17%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Focus | ST | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Bumper Cover, Front Part Number: 2M5Z-17D957-FAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Replaces: 2M5Z-17D957-KAB, YS4Z-17D957-FAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | LX, SE, Sony Limited Edition, ZTS, ZTW, ZX3, ZX5 | 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Bumper Cover, Rear Part Number: 9S4Z-17K835-BAPTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Focus | SE, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Bumper Cover, Front Part Number: 8S4Z-17D957-APTM
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Bumper Cover, Rear Part Number: 6S4Z-17K835-HAPTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 3S4Z-17K835-FAA, YS4Z-17K835-SAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Focus | LX, S, SE, SE Wagon, SEL, Series 25, SES, ST, SVT 3 Door, SVT 5 Door, ZTS, ZTW, ZX3, ZX4, ZX5, ZXW | 2.0L L4, 2.3L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Bumper Cover, Rear Part Number: 6S4Z-17K835-GAPTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 3S4Z-17K835-DAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Focus | LX, S, SE, SE Wagon, SEL, Series 25, SES, ST, SVT 3 Door, SVT 5 Door, ZTS, ZTW, ZX3, ZX4, ZX5, ZXW | 2.0L L4, 2.3L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Bumper Cover, Rear Part Number: 6S4Z-17K835-BA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 4S4Z-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | LX, S, SE, SE Wagon, SEL, Series 25, SES, ST, SVT 3 Door, SVT 5 Door, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 2.0L L4, 2.3L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

Ford Focus Bumper Cover

OEM Bumper Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper Cover with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Bumper Cover of the Ford Focus is a soft panel that covers a vehicle's actual bumper and sharpens its appearance while adding to its protective performance. The Bumper Cover, either front or rear, is a part of a multi-piece bumper assembly, which may include grille inserts, trim rings and light bezels. When surface lines are smoothed and airflow is guided suitably, the aerodynamics of the vehicle is aided which further helps enhance speed and fuel efficiency. The panel has openings which can house fog lamps, registration plates, parking-aid sensors, or pass cooling air to the radiator and other heat exchangers. Unused light and tow-hook openings can be covered with decorative covers to maintain a finished look. When this component is cracked, faded, or otherwise damaged, a Ford Focus Bumper Cover replacement will restore styling, and basic impact protection. The replacement cost will vary depending on whether the kit has the required components and its size. The designs of the Ford Focus fitting directly ensure the precise fitment of the panels that do not require complicated adjustment, meaning the Ford Focus body remains coherent. A properly secured Bumper Cover protects these delicate components from road debris. That's why you need to ensure that your Ford Focus Bumper Cover stays in good shape.

Ford Focus Bumper Cover Parts and Q&A

Bumper Cover, Front
9S4Z-17D957-BAPTM
Q: How to remove and replace the front bumper cover on Ford Focus?
A:
The procedure to change the front bumper cover starts with placing the vehicle in neutral gear while mounted on a hoist. Start removing the front bumper cover by taking out the 4 radiator grille pin-type retainers and the radiator grille and then the radiator lower Air Deflector. The first step involves taking out the fog lamp wiring harness pin-type retainer and the set of 6 fender splash shield pushpins then placing all elements apart. Both pin-type retainers on the upper bumper cover should be removed first although better visibility can be achieved by removing the headlamp to gain access to the pushpin retainers below the headlamps on the bumper cover mounting reinforcement bracket. Next you should remove the 4 nuts that secure the bumper cover mounting reinforcement bracket. Pry the rearward portion of the bumper cover ahead to unhinge it from the left- and right-hand fenders and perform removal by disassembling retaining brackets beginning at the wheel well. The installation of a new bumper cover follows the steps in reverse order to placement.
Bumper Cover, Front
4M5Z-17D957-BA
Q: How to service the front bumper cover on Ford Focus?
A:
Service of the front bumper cover usually starts by removing both the pin-type retainer and radiator Air Deflector. First disconnect the turn signal lamp electrical connectors when required. The radiator grille requires removal after extraction of its screws. The service begins with vehicle support before moving on to detach the radiator lower air deflector through the removal of 8 bolts and 5 pin-type retainers before leaving the air deflector set aside. It is essential to first take out the LH and RH fender splash shield bolts before continuing with the LH and RH bumper cover fender bolts removal. Unplug the electrical wiring connected to the side turn signal lamps and also disconnect the electrical wires for the available fog lamps in the system. The process starts with dropping the vehicle while you pull the pin-type retainers from the positions attached to the radiator grille opening panel. Complete the replacement by lowering the bumper cover before disconnecting it from the radiator splash shield. There are two ways to install the bumper cover which require performing all steps in reverse order of removal.