How to Safely Service and Repair a Fuel Level Sensor on Ford Focus?

A service of the fuel level sensor begins by removing the fuel pump (FP) module. Start the service by disconnecting the electrical connector from the fuel level sensor. First disconnect the electrical connector from the fuel level sensor followed by screw removal to extract the sensor. The installation process for a new fuel level sensor follows the exact opposite steps of removal. Avoid all forms of flames together with smoking and carrying lighted tobacco near fuel-related components since these components contain highly flammable mixtures that can cause fatal personal injuries. Personal electronic devices should be kept away from fuel-related components since they present the same safety risks.

What safety precautions should be observed when servicing the fuel level sensor on Ford Focus?

Following safety guidelines becomes essential when servicing the fuel level sensor because it contains highly combustible substance mixtures. All activities near the EVAP system must exclude smoking and lit tobacco use along with all flames and personal electronics including mobile phones and audio equipment. Handling fuel with proper attention will protect you when you must prepare for possible spills that can start from hot vehicle sections. Work on the evaporative emission (EVAP) system and all fuel-related components requires disconnecting the battery ground cable. Your first step must be the removal of the Fuel Pump (FP) module. Before installation of the new fuel level sensor, you should first disconnect the electrical connector followed by depressing the lock tabs to free the fuel level sensor for removal from the FP module. Installation of the new sensor demands following the reverse order of removal steps.

OEM Ford Focus Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Fuel Level Sensors found

View related parts
Ford Focus Fuel Gauge Sending Unit Part Number: 9S4Z-9A299-A
$88.81 MSRP: $122.86
You Save: $34.05 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Fuel Gauge Sending Unit Part Number: BV6Z-9A299-A
$82.20 MSRP: $138.00
You Save: $55.80 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Pump Module Assembly; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Fuel Pump Part Number: 1M5Z-9H307-CA
$177.09 MSRP: $240.98
You Save: $63.89 (27%)
ADD TO CART
Product Specifications
- Other Name: Sender and Pump Assembly; Fuel Tank Sending Unit; Fuel Pump Module; Electric Fuel Pump; Fuel Level Sensor; Strainer Set.; Fuel Gauge Sending Unit; Sending Unit
- Replaces: 1M5Z-9275-BB, 1M5Z-9H307-AC, PS-144
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Ford Focus | LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Fuel Gauge Sending Unit, Passenger Side Part Number: G1FZ-9A299-B
$113.58 MSRP: $180.36
You Save: $66.78 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit, Right; Level Sensor
- Position: Passenger Side
- Replaces: PS-995, G1FZ-9A299-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Fuel Pump, Driver Side Part Number: G1FZ-9275-B
$324.61 MSRP: $520.00
You Save: $195.39 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Electric Fuel Pump, Left; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Position: Driver Side
- Replaces: G1FZ-9275-A, PS-994
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Fuel Gauge Sending Unit Part Number: 8S4Z-9A299-B
$96.24 MSRP: $130.96
You Save: $34.72 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Replaces: PS-292, 8S4Z-9A299-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Focus | S, SE, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Fuel Gauge Sending Unit Part Number: 2M5Z-9275-AB
$62.10 MSRP: $84.50
You Save: $22.40 (27%)
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit
- Manufacturer Note: Fuel Tank Sender
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford Focus | LX, SE, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Fuel Gauge Sending Unit Part Number: BV6Z-9A299-B
$57.90 MSRP: $95.27
You Save: $37.37 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Pump Module Assembly; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Sending Unit Part Number: 3S4Z-9H307-BC
Product Specifications
- Other Name: Sender and Pump Assembly; Fuel Pump Module with Strainer and Level Sensor.
- Manufacturer Note: Fuel Pump
- Replaces: 3S4Z-9H307-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford Focus | LX, SE, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Sending Unit Part Number: 3S4Z-9H307-AB
Product Specifications
- Other Name: Sender and Pump Assembly; Fuel Pump Module with Strainer; Electric Fuel Pump; Fuel Level Sensor.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Focus | LX, SE, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.3 L GAS

Ford Focus Fuel Level Sensor

OEM Fuel Level Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Level Sensor with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Also, in Ford Focus automobiles, the Fuel Level Sensor is a significant feature that communicates the state of the fuel tank within the automobile. These are electronic devices that are used for the purpose of measuring fuel levels when the car is in operation and at other times as well; to relieve the driver, the gadget offers fast information. Fuel gauge sender fixed components are float, the actuating rod, and resistor, these are used in sending signals to the fuel gauge. If there are some problems with the fuel level sensor, then it is better to address to the specialized service. Correct operation of the sensor enables early notification of the refueling, eliminating such issues as a 'full tank' message for an improperly short period after refilling.

Ford Focus Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
8S4Z-9A299-B
Q: How to Safely Service and Repair a Fuel Level Sensor on Ford Focus?
A:
A service of the fuel level sensor begins by removing the Fuel Pump (FP) module. Start the service by disconnecting the electrical connector from the fuel level sensor. First disconnect the electrical connector from the fuel level sensor followed by screw removal to extract the sensor. The installation process for a new fuel level sensor follows the exact opposite steps of removal. Avoid all forms of flames together with smoking and carrying lighted tobacco near fuel-related components since these components contain highly flammable mixtures that can cause fatal personal injuries. Personal electronic devices should be kept away from fuel-related components since they present the same safety risks.
Fuel Gauge Sending Unit
9S4Z-9A299-A
Q: What safety precautions should be observed when servicing the fuel level sensor on Ford Focus?
A:
Following safety guidelines becomes essential when servicing the fuel level sensor because it contains highly combustible substance mixtures. All activities near the EVAP system must exclude smoking and lit tobacco use along with all flames and personal electronics including mobile phones and audio equipment. Handling fuel with proper attention will protect you when you must prepare for possible spills that can start from hot vehicle sections. Work on the evaporative emission (EVAP) system and all fuel-related components requires disconnecting the battery ground cable. Your first step must be the removal of the Fuel Pump (FP) module. Before installation of the new fuel level sensor, you should first disconnect the electrical connector followed by depressing the lock tabs to free the fuel level sensor for removal from the FP module. Installation of the new sensor demands following the reverse order of removal steps.