How to service and repair the oil pan on Ford Focus?

The service process requires uninstalling the catalytic converter and draining engine oil from the drain plug as a necessary step before removing oil pan bolts. When performing this procedure you should avoid creating damage to the mating surfaces. The tight drain plug must be tapped using a rubber hammer so the spatula can detach the oil pan from the lower crankcase. The installation should begin with proper cleaning of mating faces because sealant residue must be eliminated and all oil residue and sludge within the oil pan must be removed. Ten M6 x 20 studs should be installed into the dead end bores to safeguard the ladder frame from sealant damage. Place a 3 mm bead of sealant on the oil pan mating surface right before attaching it to the ladder frame within ten minutes while avoiding removal after the first touch. For bolting the drain plug proceed in two installation stages by torquing up to 6 Nm followed by tightening to 10 Nm. Reinstallation of the catalytic converter should follow engine oil filling according to the stated capacity.

OEM Ford Focus Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Oil Pans found

View related parts
Ford Focus Oil Pan Part Number: H1BZ-6675-B
$192.70 MSRP: $280.50
You Save: $87.80 (32%)
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: H1BZ-6675-A, H1BZ-6675-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | SE | 3 Cyl 1.0 L GAS
View related parts
Ford Focus Oil Pan Part Number: 1S7Z-6675-D
$105.58 MSRP: $153.68
You Save: $48.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: 1S7Z-6675-AA, 1S7Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Focus | S, SE, SEL, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oil Pan Part Number: CJ5Z-6675-G
$160.83 MSRP: $248.20
You Save: $87.37 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: BB5Z-6675-A, CJ5Z-6675-D, CJ5Z-6675-A, CJ5Z-6675-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | RS, ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Oil Pan Part Number: G1FZ-6675-B
$229.27 MSRP: $336.67
You Save: $107.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: G1FZ-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Oil Pan Part Number: CM5Z-6675-D
$117.58 MSRP: $180.95
You Save: $63.37 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: CP9Z-6675-A, CM5Z-6675-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oil Pan Part Number: YS4Z-6675-AA
$95.97 MSRP: $139.70
You Save: $43.73 (32%)
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan; Engine Oil Pan Gasket Set; Oil Pan Gasket Set
- Manufacturer Note: Incl. 6730 plug
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oil Pan Part Number: 3M4Z-6675-AA
$123.68 MSRP: $180.03
You Save: $56.35 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford Focus | LX, SE, ST, ZTS, ZTW, ZX3, ZX4 ST, ZX5 | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Oil Pan Part Number: E3BZ-6675-A
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: CM5Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | SE | 3 Cyl 1.0 L GAS
View related parts
Ford Focus Oil Pan Part Number: YS4Z-6675-BA
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Manufacturer Note: Incl. 6710 gskt. and 6730 plug
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | LX, SE | 4 Cyl 2.0 L GAS

Ford Focus Oil Pan

OEM Oil Pan boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Oil Pan with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The body of the Ford Focus is an Oil Pan which is responsible for holding engine oil in order to sufficiently lubricate and cool various parts that constitute the engine of the car. Ford Focus for instance mostly uses the wet sump system whereby oil is stored in the Oil Pan below the engines. The oil pump with the help of a pickup tube sucks the oil, circulates it through the engine and then oil comes back to the Oil Pan in order to provide proper lubrication under different operating conditions. In the past, the Ford Focus Oil Pan is produced from stamped steel however, recent development allowed utilization of cast aluminum in several Ford Focus oil pan models to increase sturdiness and reliability. Even if the tasks of a car's Oil Pan stay the same regardless of Ford Focus generation, the changes in the design and materials used intentionally represent improvements of engine technologies to offer the optimal performance and dependability in the functionality of the Oil Pan.

Ford Focus Oil Pan Parts and Q&A

Oil Pan
YS4Z-6675-AA
Q: How to service and repair the oil pan on Ford Focus?
A:
The service process requires uninstalling the Catalytic Converter and draining engine oil from the drain plug as a necessary step before removing oil pan bolts. When performing this procedure you should avoid creating damage to the mating surfaces. The tight drain plug must be tapped using a rubber hammer so the spatula can detach the oil pan from the lower crankcase. The installation should begin with proper cleaning of mating faces because sealant residue must be eliminated and all oil residue and sludge within the oil pan must be removed. Ten M6 x 20 studs should be installed into the dead end bores to safeguard the ladder frame from sealant damage. Place a 3 mm bead of sealant on the oil pan mating surface right before attaching it to the ladder frame within ten minutes while avoiding removal after the first touch. For bolting the drain plug proceed in two installation stages by torquing up to 6 Nm followed by tightening to 10 Nm. Reinstallation of the catalytic converter should follow engine oil filling according to the stated capacity.