How to Service and Repair Oxygen Sensors on Ford Focus?

The first step for repairing or servicing the Heated Oxygen Sensor (HO2S) consists of placing the vehicle on a hoist platform with the transmission set to neutral. Disconnect the battery ground cable. The service on HO2S requires disconnecting power connectors from equipment with secondary air injection while detaching wiring retainers and removing the EVAP purging valve heat shield. Reinstall the heat shield through snapping after completing the installation. You should unfasten the exhaust manifold heat shield by removing its four bolts before placing it away so you can reinstall with a torque of 11 Nm (8 lb-ft). Use penetrating and lock lubricant on the HO2S before using a 22 mm crows foot wrench to remove it while tightening to 48 Nm (35 lb-ft) when installing the sensor. Unsnap the electrical connector heat shield from vehicles without secondary air injection before disconnecting the electrical connector and detaching the wiring retainer. For smooth removal of the HO2S apply lubrication if needed before using the 22 mm crows foot wrench in a manner where you tighten it to 48 Nm (35 lb-ft) upon completion. After positioning the sensor wiring correctly around hot surfaces and away from edges, make sure that all retainers secure it and that the electrical connector locking tab is firmly engaged. Users should coat the threaded sections of professionals sensors with anti-seize lubricant before sensor installation. The reverse process should then be used to finish the installation.

OEM Ford Focus Oxygen Sensors

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Oxygen Sensors found

View related parts
Ford Focus Oxygen Sensor, Rear Driver Side Part Number: GU2Z-9G444-A
$56.02 MSRP: $92.18
You Save: $36.16 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor
- Position: Rear Driver Side
- Replaces: 1R3Z-9G444-BA, 1R3Z-9G444-AA, 5F9Z-9G444-BA, 5W6Z-9G444-BA, 5C5Z-9F472-AA, DY-1091, DY-1005, DY-1063, DY-1089, DY-649, DY-1086, DY-1104, F1TZ-9F472-A, F4DZ-9F472-A, F6DZ-9G444-AA, F88Z-9F472-AA, F78Z-9F472-BA, F75Z-9G444-BA, DY-1081, DY-1060, DY-800, DY-831, DY-832, F3UZ-9F472-A, F4DZ-9F472-B, F4ZZ-9F472-C, F4UZ-9F472-A, F78Z-9F472-AA, F7RZ-9G444-BA, DY-1040, XC2Z-9F472-BA, F1SZ-9F472-A, XR3Z-9G444-BB, F5WZ-9F472-BA, 5C5Z-9F472-BA, 6E5Z-9G444-AA, 5W6Z-9G444-AA, DY-1034, DY-1093, DY-1058, F1SZ-9F472-B, 6L7Z-9F472-BA, DY-761, F5AZ-9G444-B, F4SZ-9F472-A, F77Z-9F472-BA, F6DZ-9G444-B, DY-1039, F85Z-9G444-E, F5UZ-9F472-A, F75Z-9G444-AA, F88Z-9F472-AB, F4SZ-9F472-D, F8RZ-9G444-BB, F85Z-9G444-AA, F85Z-9G444-AB, F88Z-9F472-BA, DY-1053, XR3Z-9G444-JA, XC2Z-9F472-AA, DY-1038, DY-703, F6DZ-9G444-EA, F5MZ-9F472-AA, DY-1087, FOTZ-9F472-A, DY-1057, XR3Z-9G444-EA, XR3Z-9G444-HA, DY-661, DY-731
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Focus | LX, S, SE, SES, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Oxygen Sensor, Front Part Number: FV4Z-9F472-A
$133.71 MSRP: $220.00
You Save: $86.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front; Wideband Air/Fuel Sensor; Front Oxygen Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Oxygen Sensor, Rear Part Number: F1FZ-9G444-A
$59.23 MSRP: $97.45
You Save: $38.22 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | SE | 3 Cyl 1.0 L GAS
View related parts
Ford Focus Oxygen Sensor, Front Passenger Side Part Number: F1FZ-9F472-A
$81.77 MSRP: $134.55
You Save: $52.78 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front, Front Right; Front Oxygen Sensor; Upper Oxygen Sensor
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | SE | 3 Cyl 1.0 L GAS
View related parts
Ford Focus Oxygen Sensor, Rear Part Number: DS7Z-9F472-A
$83.32 MSRP: $137.09
You Save: $53.77 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front, Rear; Wideband Air/Fuel Sensor; Front Oxygen Sensor; Upper Oxygen Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2018 Ford Focus | S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oxygen Sensor, Rear Part Number: CV6Z-9G444-A
$42.14 MSRP: $66.91
You Save: $24.77 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor
- Manufacturer Note: Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oxygen Sensor, Rear Part Number: CM5Z-9G444-A
$62.32 MSRP: $102.55
You Save: $40.23 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | ST | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oxygen Sensor, Front Part Number: BA5Z-9F472-A
$93.70 MSRP: $154.18
You Save: $60.48 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front; Wideband Air/Fuel Sensor; Front Oxygen Sensor; Upper Oxygen Sensor
- Manufacturer Note: Front Or Rear
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | ST | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oxygen Sensor, Front Passenger Side Part Number: 8F9Z-9F472-H
$96.69 MSRP: $159.09
You Save: $62.40 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front, Front Left, Front Right; Wideband Air/Fuel Sensor; Air/Fuel Sensor; Front Oxygen Sensor; Upper Oxygen Sensor
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2013 Ford Focus | S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oxygen Sensor, Front Part Number: 8F9Z-9F472-D
$132.60 MSRP: $218.18
You Save: $85.58 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front; Wideband Air/Fuel Sensor; Air/Fuel Sensor; Front Oxygen Sensor; Upper Oxygen Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Ford Focus | S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oxygen Sensor, Center Passenger Side Part Number: 5S4Z-9G444-BA
$49.69 MSRP: $78.91
You Save: $29.22 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Center, Rear; Rear Oxygen Sensor
- Position: Center Passenger Side
- Replaces: 3S4Z-9G444-AA, 5S4Z-9G444-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Focus | LX, S, SE, SEL, SES, ST, ZTS, ZTW, ZX3, ZX4 ST, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Oxygen Sensor, Front Part Number: 5S4Z-9F472-AA
$56.13 MSRP: $92.36
You Save: $36.23 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front; Front Oxygen Sensor
- Position: Front
- Replaces: 3S4Z-9F472-CA, DY-990, 3S4Z-9F472-CC, DY-1031
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Focus | LX, S, SE, SES, ST, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Oxygen Sensor, Front Part Number: 3S4Z-9F472-DA
$106.30 MSRP: $174.91
You Save: $68.61 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front; Front Oxygen Sensor; Upper Oxygen Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Oxygen Sensor, Rear Part Number: FB5Z-9G444-C
$67.44 MSRP: $107.09
You Save: $39.65 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor; Lower Oxygen Sensor
- Position: Rear
- Replaces: DY-1602, FB5Z-9G444-A, DY-1338, FB5Z-9G444-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Rear Oxygen Sensor, Driver Side Part Number: 1R3Z-9G444-CA
$52.05 MSRP: $70.83
You Save: $18.78 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Rear; Oxygen Sensor
- Manufacturer Note: Located in pipe of the bottom of converter. Dark gray connector., PZEV
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Focus | LX, SE, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Rear Oxygen Sensor, Driver Side Part Number: 5S4Z-9G444-CA
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Rear; Oxygen Sensor
- Position: Rear Driver Side
- Replaces: 5S4Z-9G444-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | ST, ZX4 ST | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Oxygen Sensor Part Number: XS2Z-9G444-AA
Product Specifications
- Other Name: Sensor Assembly; Rear Oxygen Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Focus | LX, S, SE, SES, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Oxygen Sensor, Rear Part Number: F1FZ-9G444-H
$91.14 MSRP: $144.73
You Save: $53.59 (38%)
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor
- Position: Rear
- Replaces: F1FZ-9G444-E, DY-1453
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Ford Focus | SE | 3 Cyl 1.0 L GAS

Ford Focus Oxygen Sensors

OEM Oxygen Sensors boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Oxygen Sensors with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Oxygen Sensorss in Ford Focus vehicles represents an important component of the car's system, as it is involved in the measurement of the quantity of oxygens that has not been burned in the exhaust, which will be used for the enhancement of the A/F mixture and the decrease of the exhaust emissions. The voltage signal depends on the oxygen concentration and the engine control computer is able to modify the fuel injector timing as per the requirements. This feedback mechanism allows the engine to run in a 'closed loop', thus optimising the efficiency of the catalytic converter. Zirconium dioxide-based oxygen sensors are commonly used in Ford Focus models; these cars may be equipped with both upstream and downstream sensors. Upstream oxygen sensor gives continual feed back for the adjustment of the air-fuel mixture, while downstream oxygen sensor checks on the efficiency of the catalytic converter. There may be latest models with air/fuel ratio sensors having broader sensing capability than the historic narrow band sensors. Contamination and age related aging can results in an increase in emission levels as well as loss of fuel economy of both the two types.

Ford Focus Oxygen Sensors Parts and Q&A

Oxygen Sensor, Rear Driver Side
GU2Z-9G444-A
Q: How to Service and Repair Oxygen Sensors on Ford Focus?
A:
The first step for repairing or servicing the Heated Oxygen Sensor (HO2S) consists of placing the vehicle on a hoist platform with the transmission set to neutral. Disconnect the battery ground cable. The service on HO2S requires disconnecting power connectors from equipment with secondary air injection while detaching wiring retainers and removing the EVAP purging valve heat shield. Reinstall the heat shield through snapping after completing the installation. You should unfasten the exhaust manifold heat shield by removing its four bolts before placing it away so you can reinstall with a torque of 11 Nm (8 lb-ft). Use penetrating and lock lubricant on the HO2S before using a 22 mm crows foot wrench to remove it while tightening to 48 Nm (35 lb-ft) when installing the sensor. Unsnap the electrical connector heat shield from vehicles without secondary air injection before disconnecting the electrical connector and detaching the wiring retainer. For smooth removal of the HO2S apply lubrication if needed before using the 22 mm crows foot wrench in a manner where you tighten it to 48 Nm (35 lb-ft) upon completion. After positioning the sensor wiring correctly around hot surfaces and away from edges, make sure that all retainers secure it and that the electrical connector locking tab is firmly engaged. Users should coat the threaded sections of professionals sensors with anti-seize lubricant before sensor installation. The reverse process should then be used to finish the installation.