How to Service and Repair the Power Steering Hose on Ford Focus?

The battery removal along with the battery tray must start the process of servicing power steering line maintenance. Disconnect the pressure line from its position between the pressure and return line retainer. The automatic transmission requires professionals to disconnect the turbine shaft speed (TSS) sensor electrical connector near the transmission point while moving it away from the pressure line path. The service starts with removing the lower radiator air deflector and power steering pump pulley and power steering pressure (PSP) sensor electrical connector. Secure the PSP sensor onto the pressure line by tightening it to 20 Nm at installation. The technician should disconnect the power steering pump pressure line fitting and tighten this component to 65 Nm (48 ft. lbs.) when reinstalling. The A/C compressor line bracket must be separated from the A/C compressor stud before detaching the wiring harness retainer and removing the pressure line-to-A/C compressor stud nut which requires 9 Nm (80 inch lbs.) torque when reinstalling the assembly. The next step requires you to loosen the A/C line bracket screw before moving the A/C line and pressure line brackets away from the A/C compressor stud. To replace the pressure line bracket, first detach the oil pressure sending unit wiring harness retainer from the pressure line bracket-to-starter stud, then remove the nut from the pressure line bracket-to-starter stud before setting the pressure line bracket aside at 9 Nm (80 inch lbs.). First disconnect the pressure line from the steering gear by removing the bolt securing the steering line to steering gear retainer along with the removal of the pressure line from its retainer before reuniting the pressure line to the steering gear. During reinstallation tidy the clamp plate and torque the bolt to 23 Nm (17 ft. lbs.). The three pressure and return line retainers need to have the pressure line removed from their retainers. Automatic transmission vehicles require the selector lever cable to disconnect by pinch-clamping the retainer clips then extracting the cable from the cable bracket before pulling the cable end toward the shift shaft lever to remove it from the shaft. Set cable and retainer off to the side from the pressure line. When replacing the pressure line it should be directed properly before you complete filling your power steering system.

OEM Ford Focus Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Power Steering Hoses found

View related parts
Ford Focus Power Steering Return Hose Part Number: 5S4Z-3A713-A
$19.56 MSRP: $27.06
You Save: $7.50 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Lower Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Power Steering Return Hose Part Number: YS4Z-3A713-CA
$40.16 MSRP: $54.64
You Save: $14.48 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Lower Return Hose
- Manufacturer Note: RETURN LINE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Power Steering Pressure Hose Part Number: YS4Z-3A719-BA
$112.41 MSRP: $152.96
You Save: $40.55 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Focus | LX, SE | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Reservoir Hose Part Number: 5S4Z-3691-AA
Product Specifications
- Other Name: Hose - Connecting; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Pressure Hose Part Number: 7S4Z-3A719-B
Product Specifications
- Other Name: Hose Assembly; Power Steering Pressure Hose; Power Steering Hose
- Replaces: 6S4Z-3A719-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Focus | S, SE, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Reservoir Hose Part Number: 2M5Z-3691-AA
Product Specifications
- Other Name: Hose - Connecting; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Focus | LX, S, SE, SES, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Power Steering Pressure Hose Part Number: AS4Z-3A719-F
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Replaces: AS4Z-3A719-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Power Steering Pressure Hose Part Number: 6S4Z-3A719-D
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Replaced by: 7S4Z-3A719-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Lower Return Hose Part Number: 7S4Z-3A713-A
Product Specifications
- Other Name: Tube Assembly; Power Steering Return Hose; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Focus | S, SE, SES, ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Power Steering Pressure Hose Part Number: 98AZ-3A719-LL
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000 Ford Focus | LX, SE | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Power Steering Return Hose Part Number: AS4Z-3A713-B
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose
- Replaces: 9S4Z-3A713-B, 9S4Z-3A713-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Power Steering Return Hose Part Number: YS4Z-3A713-AA
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Lower Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Focus | S, SE, SES, SVT, ZTS, ZTW, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Power Steering Pressure Hose Part Number: 9S4Z-3A719-A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Power Steering Pressure Hose Part Number: 1S4Z-3A719-MA
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Focus | LX, SE, Sony Limited Edition, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Power Steering Pressure Hose Part Number: 2M5Z-3A719-CA
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Manufacturer Note: Does Not Include Quick Connect Fitting At Pump
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Focus | LX, SVT | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Reservoir Hose Part Number: 3S4Z-3691-AA
Product Specifications
- Other Name: Hose - Connecting; Power Steering Hose
- Manufacturer Note: Hose, resevoir to pump
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Focus | ZX4 ST | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Power Steering Return Hose Part Number: 3S4Z-3A713-AA
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Lower Return Hose
- Manufacturer Note: RETURN LINE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford Focus | LX, SE, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Power Steering Pressure Hose Part Number: 3S4Z-3A719-BB
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford Focus | LX, SE, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Power Steering Pressure Hose Part Number: 8S4Z-3A719-C
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Replaces: 8S4Z-3A719-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Focus | S, SE, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Power Steering Return Hose Part Number: AS4Z-3A713-A
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Hose
- Replaces: 8S4Z-3A713-A, 9S4Z-3A713-A, 9S4Z-3A713-C, 8S4Z-3A713-C, 9S4Z-3A713-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS

Ford Focus Power Steering Hose

OEM Power Steering Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Power Steering Hose with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Another typical part that makes the Ford Focus lineup more dependable and authoritative is the Ford Focus Power Steering Hose. This basic hose transmits power steering gear to the steering pump while providing the required movement of hydraulic fluid for assisting the steering of the car. This hose for Ford Focus involving power steering is made of reinforced rubber, it is able to resists high pressure and it is used in conveying fluid from the power steering pump which is engine driven to the steering gear while a return hose directs its fluid back to the reservoir. Tested on the second-generation as well as the fourth-generation Ford Focus, the component's importance cannot be overemphasized for enhancing the steering performance of the vehicle. The Ford Focus Power Steering Hose also enhances efficiency in car operation besides acting as a safety mechanism to prevent situations trigged by leakage or spoilage of the fluid in the hose. However, the Ford Focus Power Steering Hose has fittings in both ends for easy connection and its design may have metal tubing that are pre bent to add on strength. This dedication makes it unique for the automotive sector because it provides solutions for commonly charged factors such as enhanced steering factor or sound resulting from the wear down of a car. In conclusion, the Ford Focus Power Steering Hose is a perfect example of company's vision and dedication to the superior quality and the premier technologies since this part is an essential component of the Ford Focus.

Ford Focus Power Steering Hose Parts and Q&A

Power Steering Pressure Hose
8S4Z-3A719-C
Q: How to Service and Repair the Power Steering Hose on Ford Focus?
A:
The battery removal along with the battery tray must start the process of servicing power steering line maintenance. Disconnect the pressure line from its position between the pressure and return line retainer. The automatic transmission requires professionals to disconnect the turbine shaft speed (TSS) sensor electrical connector near the transmission point while moving it away from the pressure line path. The service starts with removing the lower radiator Air Deflector and power steering pump pulley and power steering pressure (PSP) sensor electrical connector. Secure the PSP sensor onto the pressure line by tightening it to 20 Nm at installation. The technician should disconnect the power steering pump pressure line fitting and tighten this component to 65 Nm (48 ft. lbs.) when reinstalling. The A/C compressor line bracket must be separated from the A/C compressor stud before detaching the wiring harness retainer and removing the pressure line-to-A/C compressor stud nut which requires 9 Nm (80 inch lbs.) torque when reinstalling the assembly. The next step requires you to loosen the A/C line bracket screw before moving the A/C line and pressure line brackets away from the A/C compressor stud. To replace the pressure line bracket, first detach the oil pressure sending unit wiring harness retainer from the pressure line bracket-to-starter stud, then remove the nut from the pressure line bracket-to-starter stud before setting the pressure line bracket aside at 9 Nm (80 inch lbs.). First disconnect the pressure line from the steering gear by removing the bolt securing the steering line to steering gear retainer along with the removal of the pressure line from its retainer before reuniting the pressure line to the steering gear. During reinstallation tidy the clamp plate and torque the bolt to 23 Nm (17 ft. lbs.). The three pressure and return line retainers need to have the pressure line removed from their retainers. Automatic transmission vehicles require the selector lever cable to disconnect by pinch-clamping the retainer clips then extracting the cable from the cable bracket before pulling the cable end toward the shift shaft lever to remove it from the shaft. Set cable and retainer off to the side from the pressure line. When replacing the pressure line it should be directed properly before you complete filling your power steering system.