How to service the deployable steering column safely on Ford Focus?

The first step for servicing the deployable steering column requires testing the SRS dependency then opening all SRS devices outdoors at a minimum distance of 9.14 meters (30 feet) away while using hearing protection due to deployment noise. Access to the electrical connector can be gained by either lowering down or fully removing the deployable steering column from its instrument panel position. The wiring pigtail must be removed from the original vehicle harness when deploying the column except for at least 4 inches of wire remaining available for work. Laboratory personnel must first remove the wire sheathing before exposing the cut wire ends. Two 20-gauge wires with minimum 9.14 meters (30 feet) length each should be stripped at both ends to make a jumper harness. Joint the two wires at the beginning part of the jumper harness. The deployable steering column wiring should get its corresponding wires by attaching the jumper harness ends while applying insulation to close any contact points. Structure the jumper harness at least 9.14 meters (30 feet) away from the column. A completed deployment of the steering column requires connecting the ends of the jumper harness wires to a 12-volt battery following their detachment from each other. The personnel must wait for a minimum of 10 minutes after deployment before approaching the deployed steering column. They must follow standard scrapping procedures to dispose of it correctly.

OEM Ford Focus Steering Column

Steering Column Tilt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Steering Columns found

View related parts
Ford Focus Steering Column
Part Number: BV6Z-3C529-B
$167.82 MSRP: $232.16
You Save: $64.34 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Replaces: BV6Z-3C529-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Ford Focus | Electric, S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Steering Column
Part Number: BV6Z-3C529-Y
$403.27 MSRP: $546.62
You Save: $143.35 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Replaces: BV6Z-3C529-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Steering Column
Part Number: G1FZ-3C529-A
$642.26 MSRP: $878.31
You Save: $236.05 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Steering Column
Part Number: 8S4Z-3C529-K
$105.57 MSRP: $146.05
You Save: $40.48 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Focus | S, SE, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Steering Column
Part Number: 1S4Z-3C529-EA
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Manufacturer Note: less inter,active vehicle dynamics (IVD), non,adjustable column
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Focus | LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Steering Column
Part Number: AS4Z-3C529-D
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Replaces: AS4Z-3C529-B, 9S4Z-3C529-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Steering Column
Part Number: AS4Z-3C529-C
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Manufacturer Note: Now Non-Locking Design
- Replaces: 9S4Z-3C529-G, AS4Z-3C529-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Column Assembly
Part Number: 9S4Z-3C529-F
Product Specifications
- Other Name: Column Assembly - Steering; Steering Column
- Replaced by: 9S4Z-3B676-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Column Assembly
Part Number: 9S4Z-3C529-E
Product Specifications
- Other Name: Column Assembly - Steering; Steering Column
- Manufacturer Note: Now Non-Locking Design
- Replaced by: 9S4Z-3B676-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Steering Column
Part Number: 9S4Z-3C529-B
Product Specifications
- Other Name: Column Assembly - Steering
- Replaced by: 9S4Z-3B676-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Steering Column
Part Number: 9S4Z-3C529-A
Product Specifications
- Other Name: Column Assembly - Steering
- Manufacturer Note: Now Non-Locking Design
- Replaced by: 9S4Z-3B676-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Steering Column
Part Number: 1S4Z-3C529-JA
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Manufacturer Note: less inter,active vehicle dynamics (IVD), adjustable column
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Focus | LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

Ford Focus Steering Column

Welcome to our website where you can discover high-quality, genuine Ford Focus Steering Column. We offer an extensive inventory of OEM Ford Focus Steering Column at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Focus Steering Column Parts Questions & Experts Answers

Steering Column
8S4Z-3C529-K
Q: How to service the deployable steering column safely on Ford Focus?
A: The first step for servicing the deployable steering column requires testing the SRS dependency then opening all SRS devices outdoors at a minimum distance of 9.14 meters (30 feet) away while using hearing protection due to deployment noise. Access to the electrical connector can be gained by either lowering down or fully removing the deployable steering column from its instrument panel position. The wiring pigtail must be removed from the original vehicle harness when deploying the column except for at least 4 inches of wire remaining available for work. Laboratory personnel must first remove the wire sheathing before exposing the cut wire ends. Two 20-gauge wires with minimum 9.14 meters (30 feet) length each should be stripped at both ends to make a jumper harness. Joint the two wires at the beginning part of the jumper harness. The deployable steering column wiring should get its corresponding wires by attaching the jumper harness ends while applying insulation to close any contact points. Structure the jumper harness at least 9.14 meters (30 feet) away from the column. A completed deployment of the steering column requires connecting the ends of the jumper harness wires to a 12-volt battery following their detachment from each other. The personnel must wait for a minimum of 10 minutes after deployment before approaching the deployed steering column. They must follow standard scrapping procedures to dispose of it correctly.