How to Service and Repair the Rear Sway Bar Link on Ford Focus?

Service and repair operations on the rear sway bar link require the suspension to reach curb height alongside placing the vehicle into neutral gear while located on a hoist. Begin by replacing all sway bar bracket bolts before removing sway bar links and their link spacers together with bushings and sway bar link nut. Begin by throwing away the bracket bolts from the sway bar followed by removing both brackets along with the sway bar itself. Check sway bar bushings for replacement or continue using the current ones. The installation process should exclude any lubrication for sway bar and bushings after putting the bushings so their protruding side faces the left-hand side of the vehicle. Connect the bushings onto the sway bar when necessary. Make installation easier by wetting the brackets and then placing the sway bar along with brackets before securing bolts at 55 Nm (41 ft. lbs.). Put the sway bar links along with spacers into their place then install the nut and bushings and perform a torque of 15 Nm (11 ft. lbs.). Both new parts and exact part numbers must be utilized and torque values should remain within specific limitations to maintain proper retention along with performance.

OEM Ford Focus Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Sway Bar Links found

View related parts
Ford Focus Stabilizer Link, Rear Part Number: G1FZ-5C486-A
$74.88 MSRP: $118.91
You Save: $44.03 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Suspension Stabilizer Bar Link, Rear; Sway Bar Link; Link
- Manufacturer Note: RH/LH
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Stabilizer Link, Rear Part Number: CV6Z-5K484-F
$29.77 MSRP: $47.27
You Save: $17.50 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: RH/LH
- Position: Rear
- Replaces: MEF-159, MEF-160, CV6Z-5K484-B, CV6Z-5K484-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric, S, SE, SEL, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Link Part Number: CV6Z-5K484-C
$29.77 MSRP: $47.27
You Save: $17.50 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Suspension Link Kit; Sway Bar Link.
- Replaced by: CV6Z-5K484-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Ford Focus | Electric | BATTERY EV (EV/BEV)
View related parts
Ford Focus Stabilizer Link, Front Part Number: AV6Z-5K484-B
$48.09 MSRP: $76.36
You Save: $28.27 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: RH/LH
- Position: Front
- Replaces: CV6Z-5K484-A, MEF-18
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric, RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Stabilizer Link, Front Part Number: AS4Z-5K484-A
$44.74 MSRP: $73.09
You Save: $28.35 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Replaces: 5S4Z-5K484-AA, YS4Z-5K484-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Link, Front Part Number: 5S4Z-5K484-AA
$44.74 MSRP: $73.09
You Save: $28.35 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front
- Replaced by: AS4Z-5K484-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2010 Ford Focus | LX, S, SE, SEL, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Stabilizer Link, Rear Part Number: BV6Z-5C486-A
$70.07 MSRP: $117.64
You Save: $47.57 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | ST | 4 Cyl 2.0 L GAS

Ford Focus Sway Bar Link

OEM Sway Bar Link boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bar Link with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

In Ford Focus brand of cars, the Sway Bar Link is responsible for controlling the roll of the body of the car around a corner by linking the sway bar to the control arm. This link enables the sway bar to decide on the inside tire to remain tight whilst at the same time compressing the opposite side, this makes it easier to distribute weight and improve handling. There are many Sway Bar Link types, which have been used on Ford Focus years of production with every model featuring the latest suspension systems. These links enable motion transfer between the sway bar and control arm to be more fluid, hence stability and control. Thus, reliability of the Sway Bar Link plays a significant role in preserve the general driving impression on Ford Focus cars and during turns specifically.

Ford Focus Sway Bar Link Parts and Q&A

Stabilizer Link, Front
5S4Z-5K484-AA
Q: How to Service and Repair the Rear Sway Bar Link on Ford Focus?
A:
Service and repair operations on the rear sway bar link require the suspension to reach curb height alongside placing the vehicle into neutral gear while located on a hoist. Begin by replacing all sway bar bracket bolts before removing sway bar links and their link spacers together with bushings and sway bar link nut. Begin by throwing away the bracket bolts from the sway bar followed by removing both brackets along with the sway bar itself. Check sway bar bushings for replacement or continue using the current ones. The installation process should exclude any lubrication for sway bar and bushings after putting the bushings so their protruding side faces the left-hand side of the vehicle. Connect the bushings onto the sway bar when necessary. Make installation easier by wetting the brackets and then placing the sway bar along with brackets before securing bolts at 55 Nm (41 ft. lbs.). Put the sway bar links along with spacers into their place then install the nut and bushings and perform a torque of 15 Nm (11 ft. lbs.). Both new parts and exact part numbers must be utilized and torque values should remain within specific limitations to maintain proper retention along with performance.