Other Name: Lamp Assembly - Fog - Front; Fog Light, Front Left; Fog Light
Position: Front Driver Side
Fits the following Ford Models:
Fusion | 2019-2020 | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
Other Name: Lamp Assembly - Fog - Front; Fog Light, Front Left; Fog Light
Position: Front Driver Side
Fits the following Ford Models:
Fusion | 2017-2020 | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
Other Name: Lamp Assembly - Fog - Front; Fog Light, Front Left; Fog Light Assembly; Fog Lamp - Left; Fog Light
Position: Front Driver Side
Fits the following Ford Models:
Escape | 2001-2004 | Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
| Page 1 of 9 |Next >
1-20 of 161 Results
Ford Fog Light
OEM Fog Light boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fog Light with long life and a perfect fit. Come to our website and find genuine Ford parts. We keep a wide inventory of OEM parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.
Q: How to Service and Repair the Fog Light on Ford Excursion?
A:
Begin services and repairs on the fog/driving lamp by detaching any front license plate frame you have installed. First disconnect the electrical connector from the fog lamp bracket then remove the bolts and fog lamp assembly while taking away the pin-type retainers and the adjustment bolt. Users should pull retaining tabs outward to uninstall the fog lamp while changing a fog lamp bulb requires physical installation. Reinstall the product using the opposite steps from removal. You should check all these prerequisites for fog lamp assembly adjustment: correct tire pressure, no unnecessary vehicle weight beyond half fuel tank capacity, level ground surface and clear, functioning fog and headlamps. Unlike other vehicles the Voito Ojeo does not need horizontal aiming adjustment since this functionality is not adjustable therefore check with your state vehicle inspection facility for visual aiming tolerance recommendations. Set the vehicle on flat terrain at a distance of 7.6 meters (25 ft) next to a vertical surface which extends at least 2.4 meters (8 ft) wide. To achieve proper visibility from fog lamps keep the top portion of illuminating area exactly 10 cm (4 inches) below the horizontal center of the lamps.
Q: How to Service the Fog Light on Ford F-350 Super Duty?
A:
Service of the fog lamp requires front license plate frame removal when present before unbolting the bracket and assembly from its housing. The fog lamp service starts with disconnecting the electrical connector and removing the pin-type retainers and adjustment bolt before pulling the retaining tabs to remove the fog lamp. It is necessary to install an updated fog lamp bulb when required. The installation procedure for this vehicle includes reversing the removal process since horizontal aim is not adjustable but vehicle owners must check with their state inspection facility about visual aiming tolerances. To perform fog lamp adjustments ensure proper tire inflation and the vehicle carries no extra weight than half a tank of fuel while it rests on level ground with clean and working headlamps and fog lamps. Aiming purposes require a vertical wall screen that is at least 2.4 meters (8 feet) wide while the vehicle should stand on level ground 7.6 meters (25 feet) distant from this wall screen. The correct aim of fog lights requires placing the top border of their intense beam area at 10 cm (4 in) below the center point of lamps.