My Garage
Cart

OEM Ford Freestar Parking Brake Cable

Emergency Parking Brake Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Brake Cables found

  • Ford Freestar Parking Brake Cable - 6F2Z-2A635-AB
    Ford Freestar Parking Brake Cable Diagram - 6F2Z-2A635-AB
    View related parts

    Ford Freestar Cable Assembly, Driver Side Part Number: 6F2Z-2A635-AB

    $44.21 MSRP: $61.16
    You Save: $16.95 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Position: Driver Side
    • Replaces: 3F2Z-2A635-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2004-2007 Ford Freestar | Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
  • Ford Freestar Parking Brake Cable - 6F2Z-2A635-AA
    Ford Freestar Parking Brake Cable Diagram - 6F2Z-2A635-AA
    View related parts

    Ford Freestar Cable Assembly, Passenger Side Part Number: 6F2Z-2A635-AA

    $43.81 MSRP: $60.61
    You Save: $16.80 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Position: Passenger Side
    • Replaces: 3F2Z-2A635-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2004-2007 Ford Freestar | Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

Ford Freestar Parking Brake Cable

Welcome to our website where you can discover high-quality, genuine Ford Freestar Parking Brake Cable. We offer an extensive inventory of OEM Ford Freestar Parking Brake Cable at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Freestar Parking Brake Cable Parts and Q&A

  • Q: How to service the rear parking brake cable on Ford Freestar?
    A: In order to replace the rear parking brake cable, make sure the car is in neutral position on a hoist. Unplug cable on the equalizer and brake caliper lever. Take the cable and conduit out of the body then put them in by following the same steps in reverse, with the tightening bolts being screwed to the right torque.
  • Q: How to service and repair the front parking brake cable on Ford Freestar?
    A: When servicing the front parking brake cable be sure that the vehicle is in neutral on the hoist. Disconnect the back cables on the equalizer, pull up the control handle and take off the trim cover. Loosen the cable assembly and the control then follow the same steps to install it back.

Related Ford Freestar Parts