How to service the radiator cooling fan motor and shroud on Ford Freestyle?

Starting to service the radiator cooling fan motor and shroud requires the disconnection of the battery ground cable. First remove the rubber retainers from the two coolant hoses on the fan shroud then place them aside. Unplug the electrical connector which belongs to the cooling fan motor. To release the lower brackets of the cooling fan motor with shroud you need to first remove its two securing bolts. The installation requires bolt torque setting to 6 Nm (53 inch lbs.) while using the same order of steps for removal to finish the installation process.

OEM Ford Freestyle Fan Motor

Cooling Fan Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fan Motor found

View related parts
Ford Freestyle Fan Assembly
Part Number: 5F9Z-8C607-BM
Product Specifications
- Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan; Cooling Fan Assembly; Fan Blade
- Manufacturer Note: Inc Fan Controller
- Replaces: 5F9Z-8C607-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS

Ford Freestyle Fan Motor

Welcome to our website where you can discover high-quality, genuine Ford Freestyle Fan Motor. We offer an extensive inventory of OEM Ford Freestyle Fan Motor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Freestyle Fan Motor Parts Questions & Experts Answers

Fan Assembly
5F9Z-8C607-BM
Q: How to service the radiator cooling fan motor and shroud on Ford Freestyle?
A: Starting to service the radiator cooling fan motor and shroud requires the disconnection of the battery ground cable. First remove the rubber retainers from the two coolant hoses on the fan shroud then place them aside. Unplug the electrical connector which belongs to the cooling fan motor. To release the lower brackets of the cooling fan motor with shroud you need to first remove its two securing bolts. The installation requires bolt torque setting to 6 Nm (53 inch lbs.) while using the same order of steps for removal to finish the installation process.